From owner-freebsd-questions Sat Aug 10 19:16:57 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id TAA01023 for questions-outgoing; Sat, 10 Aug 1996 19:16:57 -0700 (PDT) Received: from who.cdrom.com (who.cdrom.com [204.216.27.3]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id TAA00973 for ; Sat, 10 Aug 1996 19:16:48 -0700 (PDT) Received: from mail.crl.com (mail.crl.com [165.113.1.22]) by who.cdrom.com (8.7.5/8.6.11) with SMTP id SAA00241 for ; Sat, 10 Aug 1996 18:35:58 -0700 (PDT) Received: from al.imforei.apana.org.au by mail.crl.com with SMTP id AA03938 (5.65c/IDA-1.5 for ); Sat, 10 Aug 1996 18:33:39 -0700 Received: (from pjchilds@localhost) by al.imforei.apana.org.au (8.7.5/8.7.3) id LAA19884; Sun, 11 Aug 1996 11:01:50 +0930 (CST) Date: Sun, 11 Aug 1996 11:01:50 +0930 (CST) From: Peter Childs Message-Id: <199608110131.LAA19884@al.imforei.apana.org.au> To: bill_h@inetnebr.com, freebsd-questions@freebsd.org Subject: Re: Upgrading form 2.1 to 2.1.5 X-Newsreader: TIN [version 1.2 PL2] Sender: owner-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk In article <320C353C.76E1@inetnebr.com> you wrote: : I have the Walnut Creek FreeBSD 2.1 CD Set and Love it !! : Seriously, I was running SCO and switched due to a change in their : licensing and purchase polcy. : Anyway, I have looked EVERYWHERE on the freeBSD.org server and cannot : find instructions on how to upgrade from 2.1 to 2.1.5, I know I need : sources as I am always rebuilding something. : QUESTION: : What do I need to get and how do I upgrade from 2.1 to 2.1.5 Pretty much the same as installing 2.1.5 for the first time. If you have good net-connectivity then you can do it from the net, otherwise the 2.1.5 CDROM's have been pressed. When you run the 2.1.5 install disk there is an option for 2.1 -> 2.1.5 upgrade. : I have a generic Novell certified PCI NE2000 10/mb NIC ( Turbo PCI : Ethernet ), : It is set up at addr:6000 irq:12. : I cannot get my 2.1 drivers to find this card, are generic PCI NE2000's : not supported ? When you boot use the "-c" option (then "visual") to configure the ne2000 driver to use these options. (don't quote me on this, but i don't think it will support addr:6000) Peter -- Peter Childs --- http://www.imforei.apana.org.au/~pjchilds Finger pjchilds@al.imforei.apana.org.au for public PGP key