Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 22 Jan 2011 01:48:12 +0000 (UTC)
From:      Jack F Vogel <jfv@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-8@freebsd.org
Subject:   svn commit: r217713 - stable/8/sys/dev/ixgbe
Message-ID:  <201101220148.p0M1mC66076122@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: jfv
Date: Sat Jan 22 01:48:12 2011
New Revision: 217713
URL: http://svn.freebsd.org/changeset/base/217713

Log:
  MFC rev 217593:
  
  	Critical fix for panic on 82598
  	Phy detection now dynamic
  	Flow Director improvement
  	Critical fix for buf sz (jumbos)
  	Release RX lock to fix LOR

Modified:
  stable/8/sys/dev/ixgbe/ixgbe.c
  stable/8/sys/dev/ixgbe/ixgbe.h
  stable/8/sys/dev/ixgbe/ixgbe_82599.c
  stable/8/sys/dev/ixgbe/ixgbe_api.h
  stable/8/sys/dev/ixgbe/ixgbe_common.c
  stable/8/sys/dev/ixgbe/ixgbe_common.h
  stable/8/sys/dev/ixgbe/ixgbe_mbx.c
  stable/8/sys/dev/ixgbe/ixgbe_type.h
Directory Properties:
  stable/8/sys/   (props changed)
  stable/8/sys/amd64/include/xen/   (props changed)
  stable/8/sys/cddl/contrib/opensolaris/   (props changed)
  stable/8/sys/contrib/dev/acpica/   (props changed)
  stable/8/sys/contrib/pf/   (props changed)

Modified: stable/8/sys/dev/ixgbe/ixgbe.c
==============================================================================
--- stable/8/sys/dev/ixgbe/ixgbe.c	Sat Jan 22 01:43:07 2011	(r217712)
+++ stable/8/sys/dev/ixgbe/ixgbe.c	Sat Jan 22 01:48:12 2011	(r217713)
@@ -46,7 +46,7 @@ int             ixgbe_display_debug_stat
 /*********************************************************************
  *  Driver version
  *********************************************************************/
-char ixgbe_driver_version[] = "2.3.7";
+char ixgbe_driver_version[] = "2.3.8";
 
 /*********************************************************************
  *  PCI Device ID Table
@@ -175,6 +175,7 @@ static __inline void ixgbe_rx_input(stru
 
 /* Support for pluggable optic modules */
 static bool	ixgbe_sfp_probe(struct adapter *);
+static void	ixgbe_setup_optics(struct adapter *);
 
 /* Legacy (single vector interrupt handler */
 static void	ixgbe_legacy_irq(void *);
@@ -290,13 +291,6 @@ TUNABLE_INT("hw.ixgbe.rxd", &ixgbe_rxd);
 /* Keep running tab on them for sanity check */
 static int ixgbe_total_ports;
 
-/*
-** The number of scatter-gather segments
-** differs for 82598 and 82599, default to
-** the former.
-*/
-static int ixgbe_num_segs = IXGBE_82598_SCATTER;
-
 #ifdef IXGBE_FDIR
 /*
 ** For Flow Director: this is the
@@ -386,7 +380,7 @@ ixgbe_attach(device_t dev)
 	struct adapter *adapter;
 	struct ixgbe_hw *hw;
 	int             error = 0;
-	u16		pci_device_id, csum;
+	u16		csum;
 	u32		ctrl_ext;
 
 	INIT_DEBUGOUT("ixgbe_attach: begin");
@@ -399,52 +393,6 @@ ixgbe_attach(device_t dev)
 	/* Core Lock Init*/
 	IXGBE_CORE_LOCK_INIT(adapter, device_get_nameunit(dev));
 
-	/* Keep track of optics */
-	pci_device_id = pci_get_device(dev);
-	switch (pci_device_id) {
-		case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
-		case IXGBE_DEV_ID_82598EB_CX4:
-			adapter->optics = IFM_10G_CX4;
-			break;
-		case IXGBE_DEV_ID_82598:
-		case IXGBE_DEV_ID_82598AF_DUAL_PORT:
-		case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
-		case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
-		case IXGBE_DEV_ID_82598EB_SFP_LOM:
-		case IXGBE_DEV_ID_82598AT:
-			adapter->optics = IFM_10G_SR;
-			break;
-		case IXGBE_DEV_ID_82598AT2:
-			adapter->optics = IFM_10G_T;
-			break;
-		case IXGBE_DEV_ID_82598EB_XF_LR:
-			adapter->optics = IFM_10G_LR;
-			break;
-		case IXGBE_DEV_ID_82599_SFP:
-			adapter->optics = IFM_10G_SR;
-			ixgbe_num_segs = IXGBE_82599_SCATTER;
-			break;
-		case IXGBE_DEV_ID_82598_DA_DUAL_PORT :
-			adapter->optics = IFM_10G_TWINAX;
-			break;
-		case IXGBE_DEV_ID_82599_KX4:
-		case IXGBE_DEV_ID_82599_KX4_MEZZ:
-		case IXGBE_DEV_ID_82599_CX4:
-			adapter->optics = IFM_10G_CX4;
-			ixgbe_num_segs = IXGBE_82599_SCATTER;
-			break;
-		case IXGBE_DEV_ID_82599_XAUI_LOM:
-		case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
-			ixgbe_num_segs = IXGBE_82599_SCATTER;
-			break;
-		case IXGBE_DEV_ID_82599_T3_LOM:
-			ixgbe_num_segs = IXGBE_82599_SCATTER;
-			adapter->optics = IFM_10G_T;
-		default:
-			ixgbe_num_segs = IXGBE_82599_SCATTER;
-			break;
-	}
-
 	/* SYSCTL APIs */
 
 	SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
@@ -547,10 +495,6 @@ ixgbe_attach(device_t dev)
 		goto err_late;
 	}
 
-	/* Pick up the smart speed setting */
-	if (hw->mac.type == ixgbe_mac_82599EB)
-		hw->phy.smart_speed = ixgbe_smart_speed;
-
 	/* Get Hardware Flow Control setting */
 	hw->fc.requested_mode = ixgbe_fc_full;
 	hw->fc.pause_time = IXGBE_FC_PAUSE;
@@ -574,6 +518,9 @@ ixgbe_attach(device_t dev)
 		goto err_late;
 	}
 
+	/* Detect and set physical type */
+	ixgbe_setup_optics(adapter);
+
 	if ((adapter->msix > 1) && (ixgbe_enable_msix))
 		error = ixgbe_allocate_msix(adapter); 
 	else
@@ -1054,7 +1001,7 @@ ixgbe_init_locked(struct adapter *adapte
 		return;
 	}
 
-	ixgbe_reset_hw(hw);
+	ixgbe_init_hw(hw);
 	ixgbe_initialize_transmit_units(adapter);
 
 	/* Setup Multicast table */
@@ -1068,8 +1015,10 @@ ixgbe_init_locked(struct adapter *adapte
 		adapter->rx_mbuf_sz = MCLBYTES;
 	else if (adapter->max_frame_size <= 4096)
 		adapter->rx_mbuf_sz = MJUMPAGESIZE;
-	else
+	else if (adapter->max_frame_size <= 9216)
 		adapter->rx_mbuf_sz = MJUM9BYTES;
+	else
+		adapter->rx_mbuf_sz = MJUM16BYTES;
 
 	/* Prepare receive descriptors and buffers */
 	if (ixgbe_setup_receive_structures(adapter)) {
@@ -1600,7 +1549,7 @@ ixgbe_xmit(struct tx_ring *txr, struct m
 	int             i, j, error, nsegs;
 	int		first, last = 0;
 	struct mbuf	*m_head;
-	bus_dma_segment_t segs[ixgbe_num_segs];
+	bus_dma_segment_t segs[adapter->num_segs];
 	bus_dmamap_t	map;
 	struct ixgbe_tx_buf *txbuf, *txbuf_mapped;
 	union ixgbe_adv_tx_desc *txd = NULL;
@@ -2010,16 +1959,68 @@ static void
 ixgbe_identify_hardware(struct adapter *adapter)
 {
 	device_t        dev = adapter->dev;
+	struct ixgbe_hw *hw = &adapter->hw;
 
 	/* Save off the information about this board */
-	adapter->hw.vendor_id = pci_get_vendor(dev);
-	adapter->hw.device_id = pci_get_device(dev);
-	adapter->hw.revision_id = pci_read_config(dev, PCIR_REVID, 1);
-	adapter->hw.subsystem_vendor_id =
+	hw->vendor_id = pci_get_vendor(dev);
+	hw->device_id = pci_get_device(dev);
+	hw->revision_id = pci_read_config(dev, PCIR_REVID, 1);
+	hw->subsystem_vendor_id =
 	    pci_read_config(dev, PCIR_SUBVEND_0, 2);
-	adapter->hw.subsystem_device_id =
+	hw->subsystem_device_id =
 	    pci_read_config(dev, PCIR_SUBDEV_0, 2);
 
+	/* We need this here to set the num_segs below */
+	ixgbe_set_mac_type(hw);
+
+	/* Pick up the 82599 and VF settings */
+	if (hw->mac.type != ixgbe_mac_82598EB) {
+		hw->phy.smart_speed = ixgbe_smart_speed;
+		adapter->num_segs = IXGBE_82599_SCATTER;
+	} else
+		adapter->num_segs = IXGBE_82598_SCATTER;
+
+	return;
+}
+
+/*********************************************************************
+ *
+ *  Determine optic type
+ *
+ **********************************************************************/
+static void
+ixgbe_setup_optics(struct adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	int		layer;
+	
+	layer = ixgbe_get_supported_physical_layer(hw);
+	switch (layer) {
+		case IXGBE_PHYSICAL_LAYER_10GBASE_T:
+			adapter->optics = IFM_10G_T;
+			break;
+		case IXGBE_PHYSICAL_LAYER_1000BASE_T:
+			adapter->optics = IFM_1000_T;
+			break;
+		case IXGBE_PHYSICAL_LAYER_10GBASE_LR:
+		case IXGBE_PHYSICAL_LAYER_10GBASE_LRM:
+			adapter->optics = IFM_10G_LR;
+			break;
+		case IXGBE_PHYSICAL_LAYER_10GBASE_SR:
+			adapter->optics = IFM_10G_SR;
+			break;
+		case IXGBE_PHYSICAL_LAYER_10GBASE_KX4:
+		case IXGBE_PHYSICAL_LAYER_10GBASE_CX4:
+			adapter->optics = IFM_10G_CX4;
+			break;
+		case IXGBE_PHYSICAL_LAYER_1000BASE_KX:
+		case IXGBE_PHYSICAL_LAYER_10GBASE_KR:
+		case IXGBE_PHYSICAL_LAYER_10GBASE_XAUI:
+		case IXGBE_PHYSICAL_LAYER_UNKNOWN:
+		default:
+			adapter->optics = IFM_ETHER | IFM_AUTO;
+			break;
+	}
 	return;
 }
 
@@ -2216,8 +2217,8 @@ ixgbe_setup_msix(struct adapter *adapter
 
 	if (ixgbe_num_queues != 0)
 		queues = ixgbe_num_queues;
-	/* Set max queues to 8 */
-	else if (queues > 8)
+	/* Set max queues to 8 when autoconfiguring */
+	else if ((ixgbe_num_queues == 0) && (queues > 8))
 		queues = 8;
 
 	/*
@@ -2413,8 +2414,8 @@ ixgbe_setup_interface(device_t dev, stru
 	 */
 	ifmedia_init(&adapter->media, IFM_IMASK, ixgbe_media_change,
 		     ixgbe_media_status);
-	ifmedia_add(&adapter->media, IFM_ETHER | adapter->optics |
-	    IFM_FDX, 0, NULL);
+	ifmedia_add(&adapter->media, IFM_ETHER | adapter->optics, 0, NULL);
+	ifmedia_set(&adapter->media, IFM_ETHER | adapter->optics);
 	if (hw->device_id == IXGBE_DEV_ID_82598AT) {
 		ifmedia_add(&adapter->media,
 		    IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL);
@@ -2718,7 +2719,7 @@ ixgbe_allocate_transmit_buffers(struct t
 			       BUS_SPACE_MAXADDR,	/* highaddr */
 			       NULL, NULL,		/* filter, filterarg */
 			       IXGBE_TSO_SIZE,		/* maxsize */
-			       ixgbe_num_segs,		/* nsegments */
+			       adapter->num_segs,	/* nsegments */
 			       PAGE_SIZE,		/* maxsegsize */
 			       0,			/* flags */
 			       NULL,			/* lockfunc */
@@ -3181,72 +3182,67 @@ ixgbe_atr(struct tx_ring *txr, struct mb
 {
 	struct adapter			*adapter = txr->adapter;
 	struct ix_queue			*que;
-	union ixgbe_atr_input		atr_input;
 	struct ip			*ip;
 	struct tcphdr			*th;
 	struct udphdr			*uh;
 	struct ether_vlan_header	*eh;
+	union ixgbe_atr_hash_dword	input = {.dword = 0}; 
+	union ixgbe_atr_hash_dword	common = {.dword = 0}; 
 	int  				ehdrlen, ip_hlen;
-	u16 etype, vlan_id, src_port, dst_port, flex_bytes;
-	u32 src_ipv4_addr, dst_ipv4_addr;
-	u8 l4type = 0, ipproto = 0;
+	u16				etype;
 
 	eh = mtod(mp, struct ether_vlan_header *);
-	if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) 
+	if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
 		ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
-	else
+		etype = eh->evl_proto;
+	} else {
 		ehdrlen = ETHER_HDR_LEN;
-	etype = ntohs(eh->evl_proto);
+		etype = eh->evl_encap_proto;
+	}
 
 	/* Only handling IPv4 */
-	if (etype != ETHERTYPE_IP)
+	if (etype != htons(ETHERTYPE_IP))
 		return;
 
 	ip = (struct ip *)(mp->m_data + ehdrlen);
-	ipproto = ip->ip_p;
 	ip_hlen = ip->ip_hl << 2;
-	src_port = dst_port = 0;
 
 	/* check if we're UDP or TCP */
-	switch (ipproto) {
+	switch (ip->ip_p) {
 	case IPPROTO_TCP:
 		th = (struct tcphdr *)((caddr_t)ip + ip_hlen);
-		src_port = th->th_sport;
-		dst_port = th->th_dport;
-		l4type |= IXGBE_ATR_L4TYPE_TCP;
+		/* src and dst are inverted */
+		common.port.dst ^= th->th_sport;
+		common.port.src ^= th->th_dport;
+		input.formatted.flow_type ^= IXGBE_ATR_FLOW_TYPE_TCPV4;
 		break;
 	case IPPROTO_UDP:
 		uh = (struct udphdr *)((caddr_t)ip + ip_hlen);
-		src_port = uh->uh_sport;
-		dst_port = uh->uh_dport;
-		l4type |= IXGBE_ATR_L4TYPE_UDP;
+		/* src and dst are inverted */
+		common.port.dst ^= uh->uh_sport;
+		common.port.src ^= uh->uh_dport;
+		input.formatted.flow_type ^= IXGBE_ATR_FLOW_TYPE_UDPV4;
 		break;
 	default:
 		return;
 	}
 
-	memset(&atr_input, 0, sizeof(union ixgbe_atr_input));
+	input.formatted.vlan_id = htobe16(mp->m_pkthdr.ether_vtag);
+	if (mp->m_pkthdr.ether_vtag)
+		common.flex_bytes ^= htons(ETHERTYPE_VLAN);
+	else
+		common.flex_bytes ^= etype;
+	common.ip ^= ip->ip_src.s_addr ^ ip->ip_dst.s_addr;
 
-	vlan_id = htole16(mp->m_pkthdr.ether_vtag);
-	src_ipv4_addr = ip->ip_src.s_addr;
-	dst_ipv4_addr = ip->ip_dst.s_addr;
-	flex_bytes = etype;
 	que = &adapter->queues[txr->me];
-
-	ixgbe_atr_set_vlan_id_82599(&atr_input, vlan_id);
-	ixgbe_atr_set_src_port_82599(&atr_input, dst_port);
-	ixgbe_atr_set_dst_port_82599(&atr_input, src_port);
-	ixgbe_atr_set_flex_byte_82599(&atr_input, flex_bytes);
-	ixgbe_atr_set_l4type_82599(&atr_input, l4type);
-	/* src and dst are inverted, think how the receiver sees them */
-	ixgbe_atr_set_src_ipv4_82599(&atr_input, dst_ipv4_addr);
-	ixgbe_atr_set_dst_ipv4_82599(&atr_input, src_ipv4_addr);
-
-	/* This assumes the Rx queue and Tx queue are bound to the same CPU */
+	/*
+	** This assumes the Rx queue and Tx
+	** queue are bound to the same CPU
+	*/
 	ixgbe_fdir_add_signature_filter_82599(&adapter->hw,
-	    &atr_input, que->msix);
+	    input, common, que->msix);
 }
-#endif
+#endif /* IXGBE_FDIR */
 
 /**********************************************************************
  *
@@ -3508,9 +3504,9 @@ ixgbe_allocate_receive_buffers(struct rx
 				   BUS_SPACE_MAXADDR,	/* lowaddr */
 				   BUS_SPACE_MAXADDR,	/* highaddr */
 				   NULL, NULL,		/* filter, filterarg */
-				   MJUM9BYTES,		/* maxsize */
+				   MJUM16BYTES,		/* maxsize */
 				   1,			/* nsegments */
-				   MJUM9BYTES,		/* maxsegsize */
+				   MJUM16BYTES,		/* maxsegsize */
 				   0,			/* flags */
 				   NULL,		/* lockfunc */
 				   NULL,		/* lockfuncarg */
@@ -3582,8 +3578,13 @@ ixgbe_setup_hw_rsc(struct rx_ring *rxr)
 	*/
 	if (adapter->rx_mbuf_sz == MCLBYTES)
 		rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
-	else  /* using 4K clusters */
+	else if (adapter->rx_mbuf_sz == MJUMPAGESIZE)
 		rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+	else if (adapter->rx_mbuf_sz == MJUM9BYTES)
+		rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+	else  /* Using 16K cluster */
+		rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
+
 	IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(rxr->me), rscctrl);
 
 	/* Enable TCP header recognition */
@@ -3821,15 +3822,14 @@ ixgbe_initialize_receive_units(struct ad
 
 	/* Set for Jumbo Frames? */
 	hlreg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
-	if (ifp->if_mtu > ETHERMTU) {
+	if (ifp->if_mtu > ETHERMTU)
 		hlreg |= IXGBE_HLREG0_JUMBOEN;
-		bufsz = 4096 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
-	} else {
+	else
 		hlreg &= ~IXGBE_HLREG0_JUMBOEN;
-		bufsz = 2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
-	}
 	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg);
 
+	bufsz = adapter->rx_mbuf_sz  >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+
 	for (int i = 0; i < adapter->num_queues; i++, rxr++) {
 		u64 rdba = rxr->rxdma.dma_paddr;
 
@@ -4028,7 +4028,9 @@ ixgbe_rx_input(struct rx_ring *rxr, stru
                         if (tcp_lro_rx(&rxr->lro, m, 0) == 0)
                                 return;
         }
+	IXGBE_RX_UNLOCK(rxr);
         (*ifp->if_input)(ifp, m);
+	IXGBE_RX_LOCK(rxr);
 }
 
 static __inline void
@@ -4289,8 +4291,11 @@ next_desc:
 			i = 0;
 
 		/* Now send to the stack or do LRO */
-		if (sendmp != NULL)
+		if (sendmp != NULL) {
+			rxr->next_to_check = i;
 			ixgbe_rx_input(rxr, ifp, sendmp, ptype);
+			i = rxr->next_to_check;
+		}
 
                /* Every 8 descriptors we go to refresh mbufs */
 		if (processed == 8) {
@@ -4654,6 +4659,8 @@ static bool ixgbe_sfp_probe(struct adapt
 			device_printf(dev,"SFP+ module detected!\n");
 		/* We now have supported optics */
 		adapter->sfp_probe = FALSE;
+		/* Set the optics type so system reports correctly */
+		ixgbe_setup_optics(adapter);
 		result = TRUE;
 	}
 out:
@@ -4718,10 +4725,6 @@ ixgbe_handle_msf(void *context, int pend
 		hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiate);
 	if (hw->mac.ops.setup_link)
 		hw->mac.ops.setup_link(hw, autoneg, negotiate, TRUE);
-#if 0
-	ixgbe_check_link(&adapter->hw, &speed, &adapter->link_up, 0);
-       	ixgbe_update_link_status(adapter);
-#endif
 	return;
 }
 
@@ -4830,7 +4833,8 @@ ixgbe_update_stats_counters(struct adapt
 	bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
 	adapter->stats.bprc += bprc;
 	adapter->stats.mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
-	adapter->stats.mprc -= bprc;
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		adapter->stats.mprc -= bprc;
 
 	adapter->stats.prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
 	adapter->stats.prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
@@ -4871,12 +4875,14 @@ ixgbe_update_stats_counters(struct adapt
 	adapter->stats.xec += IXGBE_READ_REG(hw, IXGBE_XEC);
 	adapter->stats.fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC);
 	adapter->stats.fclast += IXGBE_READ_REG(hw, IXGBE_FCLAST);
-	adapter->stats.fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
-	adapter->stats.fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
-	adapter->stats.fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
-	adapter->stats.fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
-	adapter->stats.fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
-
+	/* Only read FCOE on 82599 */
+	if (hw->mac.type == ixgbe_mac_82599EB) {
+		adapter->stats.fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
+		adapter->stats.fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
+		adapter->stats.fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
+		adapter->stats.fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
+		adapter->stats.fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
+	}
 
 	/* Fill out the OS statistics structure */
 	ifp->if_ipackets = adapter->stats.gprc;
@@ -5012,18 +5018,6 @@ ixgbe_add_hw_stats(struct adapter *adapt
 	SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "mbuf_defrag_failed",
 			CTLFLAG_RD, &adapter->mbuf_defrag_failed,
 			"m_defrag() failed");
-#if 0
-	/* These counters are not updated by the software */
-	SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "mbuf_header_failed",
-			CTLFLAG_RD, &adapter->mbuf_header_failed,
-			"???");
-	SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "mbuf_packet_failed",
-			CTLFLAG_RD, &adapter->mbuf_packet_failed,
-			"???");
-	SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "no_tx_map_avail",
-			CTLFLAG_RD, &adapter->no_tx_map_avail,
-			"???");
-#endif
 	SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "no_tx_dma_setup",
 			CTLFLAG_RD, &adapter->no_tx_dma_setup,
 			"Driver tx dma failure in xmit");

Modified: stable/8/sys/dev/ixgbe/ixgbe.h
==============================================================================
--- stable/8/sys/dev/ixgbe/ixgbe.h	Sat Jan 22 01:43:07 2011	(r217712)
+++ stable/8/sys/dev/ixgbe/ixgbe.h	Sat Jan 22 01:48:12 2011	(r217713)
@@ -385,6 +385,7 @@ struct adapter {
 	int			advertise;  /* link speeds */
 	bool			link_active;
 	u16			max_frame_size;
+	u16			num_segs;
 	u32			link_speed;
 	bool			link_up;
 	u32 			linkvec;

Modified: stable/8/sys/dev/ixgbe/ixgbe_82599.c
==============================================================================
--- stable/8/sys/dev/ixgbe/ixgbe_82599.c	Sat Jan 22 01:43:07 2011	(r217712)
+++ stable/8/sys/dev/ixgbe/ixgbe_82599.c	Sat Jan 22 01:48:12 2011	(r217713)
@@ -67,13 +67,13 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw
 s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
 s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
 s32 ixgbe_start_hw_rev_1_82599(struct ixgbe_hw *hw);
-void ixgbe_enable_relaxed_ordering_82599(struct ixgbe_hw *hw);
 s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw);
 s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw);
 u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw);
 s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval);
-s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps);
 static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
+
 
 void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
 {
@@ -101,7 +101,8 @@ void ixgbe_init_mac_link_ops_82599(struc
 	} else {
 		if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) &&
 		     (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
-		      hw->phy.smart_speed == ixgbe_smart_speed_on)) {
+		      hw->phy.smart_speed == ixgbe_smart_speed_on) &&
+		      !ixgbe_verify_lesm_fw_enabled_82599(hw)) {
 			mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
 		} else {
 			mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
@@ -253,7 +254,7 @@ s32 ixgbe_init_ops_82599(struct ixgbe_hw
 
 	/* MAC */
 	mac->ops.reset_hw = &ixgbe_reset_hw_82599;
-	mac->ops.enable_relaxed_ordering = &ixgbe_enable_relaxed_ordering_82599;
+	mac->ops.enable_relaxed_ordering = &ixgbe_enable_relaxed_ordering_gen2;
 	mac->ops.get_media_type = &ixgbe_get_media_type_82599;
 	mac->ops.get_supported_physical_layer =
 	                            &ixgbe_get_supported_physical_layer_82599;
@@ -263,7 +264,7 @@ s32 ixgbe_init_ops_82599(struct ixgbe_hw
 	mac->ops.start_hw = &ixgbe_start_hw_rev_1_82599;
 	mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic;
 	mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_generic;
-	mac->ops.get_device_caps = &ixgbe_get_device_caps_82599;
+	mac->ops.get_device_caps = &ixgbe_get_device_caps_generic;
 	mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic;
 	mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic;
 
@@ -1375,7 +1376,7 @@ s32 ixgbe_init_fdir_perfect_82599(struct
  *  @stream: input bitstream to compute the hash on
  *  @key: 32-bit hash key
  **/
-u16 ixgbe_atr_compute_hash_82599(union ixgbe_atr_input *atr_input,
+u32 ixgbe_atr_compute_hash_82599(union ixgbe_atr_input *atr_input,
 				 u32 key)
 {
 	/*
@@ -1419,54 +1420,45 @@ u16 ixgbe_atr_compute_hash_82599(union i
 	 *
 	 */
 	__be32 common_hash_dword = 0;
-	u32 hi_hash_dword, lo_hash_dword;
-	u16 hash_result = 0;
-	u8  i;
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 hash_result = 0;
+	u8 i;
 
-	/*
-	 * the hi_hash_dword starts with vlan_id, the lo_hash_dword starts
-	 * and ends with it, the vlan at the end is added via the word swapped
-	 * xor with the hi_hash_dword a few lines down.
-	 */
-	hi_hash_dword =	IXGBE_NTOHL(atr_input->dword_stream[0]) & 0x0000FFFF;
-	lo_hash_dword = hi_hash_dword;
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = IXGBE_NTOHL(atr_input->dword_stream[0]);
 
 	/* generate common hash dword */
-	for (i = 1; i < 11; i++)
-		common_hash_dword ^= (u32)atr_input->dword_stream[i];
-	hi_hash_dword ^= IXGBE_NTOHL(common_hash_dword);
+	for (i = 10; i; i -= 2)
+		common_hash_dword ^= atr_input->dword_stream[i] ^
+				     atr_input->dword_stream[i - 1];
 
-	/* low dword is word swapped version of common with vlan added */
-	lo_hash_dword ^= (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+	hi_hash_dword = IXGBE_NTOHL(common_hash_dword);
 
-	/* hi dword is common dword with l4type and vm_pool shifted */
-	hi_hash_dword ^= IXGBE_NTOHL(atr_input->dword_stream[10]) << 16;
+	/* low dword is word swapped version of common */
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+	/* Process bits 0 and 16 */
+	if (key & 0x0001) hash_result ^= lo_hash_dword;
+	if (key & 0x00010000) hash_result ^= hi_hash_dword;
 
 	/*
-	 * Process all 32 bits of the 2 keys 2 bits at a time
-	 *
-	 * Bit flip vlan from hash result if hash key has bit 0 set, the
-	 * reason for doing this is because the hash generation shouldn't
-	 * start until bit 1 in the stream so we need to cancel out a vlan
-	 * if it was added starting at bit 0.
-	 */
-	if (key & 0x0001) {
-		hash_result ^= IXGBE_NTOHL(atr_input->dword_stream[0]) &
-			       0x0FFFF;
-		hash_result ^= lo_hash_dword;
-	}
-	if (key & 0x00010000)
-		hash_result ^= hi_hash_dword;
-
-	/* process the remaining bits in the key */
-	for (i = 1; i < 16; i++) {
-		if (key & (0x0001 << i))
-			hash_result ^= lo_hash_dword >> i;
-		if (key & (0x00010000 << i))
-			hash_result ^= hi_hash_dword >> i;
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the vlan until after bit 0 was processed
+	 */
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+
+	/* process the remaining 30 bits in the key 2 bits at a time */
+	for (i = 15; i; i-- ) {
+		if (key & (0x0001 << i)) hash_result ^= lo_hash_dword >> i;
+		if (key & (0x00010000 << i)) hash_result ^= hi_hash_dword >> i;
 	}
 
-	return hash_result;
+	return hash_result & IXGBE_ATR_HASH_MASK;
 }
 
 /*
@@ -1479,30 +1471,18 @@ u16 ixgbe_atr_compute_hash_82599(union i
 #define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
 do { \
 	u32 n = (_n); \
-	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) { \
-		if (n == 0) \
-			common_hash ^= \
-				IXGBE_NTOHL(atr_input->dword_stream[0]) & \
-				0x0000FFFF; \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
 		common_hash ^= lo_hash_dword >> n; \
-	} else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) { \
-		if (n == 0) \
-			bucket_hash ^= \
-				IXGBE_NTOHL(atr_input->dword_stream[0]) & \
-				0x0000FFFF; \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
 		bucket_hash ^= lo_hash_dword >> n; \
-	} else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) { \
-		if (n == 0) \
-			sig_hash ^= IXGBE_NTOHL(atr_input->dword_stream[0]) & \
-				    0x0000FFFF; \
-		sig_hash ^= lo_hash_dword >> n; \
-	} \
-	if (IXGBE_ATR_COMMON_HASH_KEY & (0x010000 << n)) \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
+		sig_hash ^= lo_hash_dword << (16 - n); \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
 		common_hash ^= hi_hash_dword >> n; \
-	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x010000 << n)) \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
 		bucket_hash ^= hi_hash_dword >> n; \
-	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x010000 << n)) \
-		sig_hash ^= hi_hash_dword >> n; \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
+		sig_hash ^= hi_hash_dword << (16 - n); \
 } while (0);
 
 /**
@@ -1515,47 +1495,35 @@ do { \
  *  defines, and computing two keys at once since the hashed dword stream
  *  will be the same for both keys.
  **/
-static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_input *atr_input)
+static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+					    union ixgbe_atr_hash_dword common)
 {
-	u32 hi_hash_dword, lo_hash_dword;
-	u16 sig_hash = 0, bucket_hash = 0, common_hash = 0;
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
 
-	/*
-	 * the hi_hash_dword starts with vlan_id, the lo_hash_dword starts
-	 * and ends with it, the vlan at the end is added via the word swapped
-	 * xor with the hi_hash_dword a few lines down.  The part masked off
-	 * is the part of the hash reserved to 0.
-	 */
-	hi_hash_dword =	IXGBE_NTOHL(atr_input->dword_stream[0]) & 0x0000FFFF;
-	lo_hash_dword = hi_hash_dword;
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = IXGBE_NTOHL(input.dword);
 
 	/* generate common hash dword */
-	hi_hash_dword ^= IXGBE_NTOHL(atr_input->dword_stream[1] ^
-				     atr_input->dword_stream[2] ^
-				     atr_input->dword_stream[3] ^
-				     atr_input->dword_stream[4] ^
-				     atr_input->dword_stream[5] ^
-				     atr_input->dword_stream[6] ^
-				     atr_input->dword_stream[7] ^
-				     atr_input->dword_stream[8] ^
-				     atr_input->dword_stream[9] ^
-				     atr_input->dword_stream[10]);
+	hi_hash_dword = IXGBE_NTOHL(common.dword);
 
 	/* low dword is word swapped version of common */
-	lo_hash_dword ^= (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
 
-	/* hi dword is common dword with l4type and vm_pool added */
-	hi_hash_dword ^= IXGBE_NTOHL(atr_input->dword_stream[10]) << 16;
+	/* Process bits 0 and 16 */
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
 
 	/*
-	 * Process all 32 bits of the 2 keys 2 bits at a time
-	 *
-	 * Bit flip vlan from hash result if hash key has bit 0 set, the
-	 * reason for doing this is because the hash generation shouldn't
-	 * start until bit 1 in the stream so we need to cancel out a vlan
-	 * if it was added starting at bit 0.
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the vlan until after bit 0 was processed
 	 */
-	IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+	/* Process remaining 30 bit of the key */
 	IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
 	IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
 	IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
@@ -1573,339 +1541,14 @@ static u32 ixgbe_atr_compute_sig_hash_82
 	IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
 
 	/* combine common_hash result with signature and bucket hashes */
-	sig_hash ^= common_hash;
 	bucket_hash ^= common_hash;
+	bucket_hash &= IXGBE_ATR_HASH_MASK;
 
-	/* return completed signature hash */
-	return ((u32)sig_hash << 16) | (bucket_hash & IXGBE_ATR_HASH_MASK);
-}
-
-/**
- *  ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
- *  @input: input stream to modify
- *  @vlan: the VLAN id to load
- **/
-s32 ixgbe_atr_set_vlan_id_82599(union ixgbe_atr_input *input, __be16 vlan)
-{
-	DEBUGFUNC("ixgbe_atr_set_vlan_id_82599");
-
-	input->formatted.vlan_id = vlan;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
- *  @input: input stream to modify
- *  @src_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_src_ipv4_82599(union ixgbe_atr_input *input, __be32 src_addr)
-{
-	DEBUGFUNC("ixgbe_atr_set_src_ipv4_82599");
-
-	input->formatted.src_ip[0] = src_addr;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
- *  @input: input stream to modify
- *  @dst_addr: the IP address to load
- **/
-s32 ixgbe_atr_set_dst_ipv4_82599(union ixgbe_atr_input *input, __be32 dst_addr)
-{
-	DEBUGFUNC("ixgbe_atr_set_dst_ipv4_82599");
-
-	input->formatted.dst_ip[0] = dst_addr;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_set_src_ipv6_82599 - Sets the source IPv6 address
- *  @input: input stream to modify
- *  @src_addr_0: the first 4 bytes of the IP address to load
- *  @src_addr_1: the second 4 bytes of the IP address to load
- *  @src_addr_2: the third 4 bytes of the IP address to load
- *  @src_addr_3: the fourth 4 bytes of the IP address to load
- **/
-s32 ixgbe_atr_set_src_ipv6_82599(union ixgbe_atr_input *input,
-                                 __be32 src_addr_0, __be32 src_addr_1,
-                                 __be32 src_addr_2, __be32 src_addr_3)
-{
-	DEBUGFUNC("ixgbe_atr_set_src_ipv6_82599");
-
-	input->formatted.src_ip[0] = src_addr_0;
-	input->formatted.src_ip[1] = src_addr_1;
-	input->formatted.src_ip[2] = src_addr_2;
-	input->formatted.src_ip[3] = src_addr_3;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_set_dst_ipv6_82599 - Sets the destination IPv6 address
- *  @input: input stream to modify
- *  @dst_addr_0: the first 4 bytes of the IP address to load
- *  @dst_addr_1: the second 4 bytes of the IP address to load
- *  @dst_addr_2: the third 4 bytes of the IP address to load
- *  @dst_addr_3: the fourth 4 bytes of the IP address to load
- **/
-s32 ixgbe_atr_set_dst_ipv6_82599(union ixgbe_atr_input *input,
-                                 __be32 dst_addr_0, __be32 dst_addr_1,
-                                 __be32 dst_addr_2, __be32 dst_addr_3)
-{
-	DEBUGFUNC("ixgbe_atr_set_dst_ipv6_82599");
-
-	input->formatted.dst_ip[0] = dst_addr_0;
-	input->formatted.dst_ip[1] = dst_addr_1;
-	input->formatted.dst_ip[2] = dst_addr_2;
-	input->formatted.dst_ip[3] = dst_addr_3;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_set_src_port_82599 - Sets the source port
- *  @input: input stream to modify
- *  @src_port: the source port to load
- **/
-s32 ixgbe_atr_set_src_port_82599(union ixgbe_atr_input *input, __be16 src_port)
-{
-	DEBUGFUNC("ixgbe_atr_set_src_port_82599");
-
-	input->formatted.src_port = src_port;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_set_dst_port_82599 - Sets the destination port
- *  @input: input stream to modify
- *  @dst_port: the destination port to load
- **/
-s32 ixgbe_atr_set_dst_port_82599(union ixgbe_atr_input *input, __be16 dst_port)
-{
-	DEBUGFUNC("ixgbe_atr_set_dst_port_82599");
-
-	input->formatted.dst_port = dst_port;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes
- *  @input: input stream to modify
- *  @flex_bytes: the flexible bytes to load
- **/
-s32 ixgbe_atr_set_flex_byte_82599(union ixgbe_atr_input *input, __be16 flex_bytes)
-{
-	DEBUGFUNC("ixgbe_atr_set_flex_byte_82599");
-
-	input->formatted.flex_bytes = flex_bytes;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_set_vm_pool_82599 - Sets the Virtual Machine pool
- *  @input: input stream to modify
- *  @vm_pool: the Virtual Machine pool to load
- **/
-s32 ixgbe_atr_set_vm_pool_82599(union ixgbe_atr_input *input, u8 vm_pool)
-{
-	DEBUGFUNC("ixgbe_atr_set_vm_pool_82599");
-
-	input->formatted.vm_pool = vm_pool;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type
- *  @input: input stream to modify
- *  @l4type: the layer 4 type value to load
- *
- *  This call is deprecated and should be replaced with a direct access to
- *  input->formatted.flow_type.
- **/
-s32 ixgbe_atr_set_l4type_82599(union ixgbe_atr_input *input, u8 l4type)
-{
-	DEBUGFUNC("ixgbe_atr_set_l4type_82599");
-
-	input->formatted.flow_type = l4type;
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream
- *  @input: input stream to search
- *  @vlan: the VLAN id to load
- **/
-s32 ixgbe_atr_get_vlan_id_82599(union ixgbe_atr_input *input, __be16 *vlan)
-{
-	DEBUGFUNC("ixgbe_atr_get_vlan_id_82599");
-
-	*vlan = input->formatted.vlan_id;
-
-	return IXGBE_SUCCESS;
-}
+	sig_hash ^= common_hash << 16;
+	sig_hash &= IXGBE_ATR_HASH_MASK << 16;
 
-/**
- *  ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address
- *  @input: input stream to search
- *  @src_addr: the IP address to load
- **/
-s32 ixgbe_atr_get_src_ipv4_82599(union ixgbe_atr_input *input, __be32 *src_addr)
-{
-	DEBUGFUNC("ixgbe_atr_get_src_ipv4_82599");
-
-	*src_addr = input->formatted.src_ip[0];
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address
- *  @input: input stream to search
- *  @dst_addr: the IP address to load
- **/
-s32 ixgbe_atr_get_dst_ipv4_82599(union ixgbe_atr_input *input, __be32 *dst_addr)
-{
-	DEBUGFUNC("ixgbe_atr_get_dst_ipv4_82599");
-
-	*dst_addr = input->formatted.dst_ip[0];
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address
- *  @input: input stream to search
- *  @src_addr_0: the first 4 bytes of the IP address to load
- *  @src_addr_1: the second 4 bytes of the IP address to load
- *  @src_addr_2: the third 4 bytes of the IP address to load
- *  @src_addr_3: the fourth 4 bytes of the IP address to load
- **/
-s32 ixgbe_atr_get_src_ipv6_82599(union ixgbe_atr_input *input,
-                                 __be32 *src_addr_0, __be32 *src_addr_1,
-                                 __be32 *src_addr_2, __be32 *src_addr_3)
-{
-	DEBUGFUNC("ixgbe_atr_get_src_ipv6_82599");
-
-	*src_addr_0 = input->formatted.src_ip[0];
-	*src_addr_1 = input->formatted.src_ip[1];
-	*src_addr_2 = input->formatted.src_ip[2];
-	*src_addr_3 = input->formatted.src_ip[3];
-
-	return IXGBE_SUCCESS;
-}
-
-/**
- *  ixgbe_atr_get_dst_ipv6_82599 - Gets the destination IPv6 address
- *  @input: input stream to search
- *  @dst_addr_0: the first 4 bytes of the IP address to load
- *  @dst_addr_1: the second 4 bytes of the IP address to load
- *  @dst_addr_2: the third 4 bytes of the IP address to load
- *  @dst_addr_3: the fourth 4 bytes of the IP address to load
- **/
-s32 ixgbe_atr_get_dst_ipv6_82599(union ixgbe_atr_input *input,
-                                 __be32 *dst_addr_0, __be32 *dst_addr_1,
-                                 __be32 *dst_addr_2, __be32 *dst_addr_3)
-{
-	DEBUGFUNC("ixgbe_atr_get_dst_ipv6_82599");

*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201101220148.p0M1mC66076122>