Date: Sat, 20 Jul 1996 22:18:26 +1000 From: Bruce Evans <bde@zeta.org.au> To: freebsd-scsi@FreeBSD.ORG, j@uriah.heep.sax.de Cc: jon@vcnet.com Subject: Re: 2940 and large drives Message-ID: <199607201218.WAA30953@godzilla.zeta.org.au>
next in thread | raw e-mail | index | archive | help
>> I turn OFF the option in the Adaptec for "extended BIOS for DOS-drives >> larger than 1 gig" figuring maybe that option is ONLY for DOS drives. I >It is only intended for stupid systems and always a good idea to turn >it off. Infact, the BIOS is only used for booting in Linux or on? You want the option that gives a geometry of 63 sectors/track and 255 heads/cylinders as easily as possible, preferably be default, at least for disks larger than 1GB. >FreeBSD, and entirely ignored once the system comes up. The >translation is only in effect while booting, since the BIOS doesn't >provide a better abstraction of a disk than sectors, heads, and >cylinders (without an unreasonably degraded number of bits available >for each of them). Either SCSI as Unices provide the block number >abstraction (also called LBA addressing), so no further translation >happens other than adding an offset for the start of the slice and/or >partition. A geometry of 63/255 allows booting from anywhere on disks of size up to about 8GB. If you don't use it, then booting from large disks may be complicated (booting from cylinders >= 1024 is impossible). Bruce
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199607201218.WAA30953>