Date: Wed, 06 Feb 2002 09:20:08 -0800 From: Jon Drukman <jsd@cluttered.com> To: freebsd-questions@freebsd.org Subject: 40G disk recognized as 32G - can't override!? Message-ID: <5.1.0.14.2.20020206091130.00b35e10@10.10.10.1>
next in thread | raw e-mail | index | archive | help
i'm helping a friend set up a system. he put a maxtor diamondmax 40G drive
in but we can't get it to show up as more than 32G. i looked on maxtor.com
(the drive model is 54098U8) and it says the cylinder/head/sector count is
79406/16/63. using /stand/sysinstall's fdisk option i tried to enter that
manually, but i get a warning saying
WARNING: A geometry of 79406/16/63 for ad2 is incorrect. Using
a more likely geometry. If this geometry is incorrect or you
are unsure as to whether or not it's correct, please
consult
the Hardware Guide in the Documentation submenu or use
the
(G)eometry command to change it
now.
Remember: you need to enter whatever your BIOS thinks
the
geometry is! For IDE, it's what you were told in the
BIOS
setup. For SCSI, it's the translation mode your controller
is
using. Do NOT use a ``physical geometry''.
then i'm back at the main fdisk screen and it says at the top DISK
Geometry: 4111 cyls/255 heads/63 sectors = 66043215 sectors (32247MB)
dmesg identifies the drive thus: ad2: 32253MB <Maxtor 54098U8>
[65531/16/63] at ata1-master UDMA33
i readily admit to not fully understanding the intricacies of disk geometry
and what the BIOS thinks. i was under the impression that freebsd doesn't
use the BIOS once it has booted. this isn't a boot disk, it's for data only.
any ideas on how i can fix this?
-jsd-
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.2.20020206091130.00b35e10>