Date: Wed, 29 Mar 2006 07:45:47 -0600 From: Derek Ragona <derek@computinginnovations.com> To: nospam@mgedv.net, <freebsd-questions@freebsd.org> Subject: Re: intel server board: strange LAN problem! Message-ID: <6.0.0.22.2.20060329074523.028fd450@mail.computinginnovations.com> In-Reply-To: <000001c65334$081e5c10$0a86a8c0@avalon.lan> References: <000001c65334$081e5c10$0a86a8c0@avalon.lan>
next in thread | previous in thread | raw e-mail | index | archive | help
Check the BIOS that both interfaces are enabled.
-Derek
At 07:23 AM 3/29/2006, No@SPAM@mgEDV.net wrote:
>hi together!
>
>our intel server board SE7320VP2D2 has 2 onboard LAN interfaces.
>HW address .....:40 and .....:41.
>ifconfig -a on freebsd only shows the 2nd interface (:41) as em0
>and the 1st interface is missing completely, as in the dmesg.
>
>any ideas on this? we need both interfaces, and this soon!
>and i definitely want to run freebsd on it ;-)
>
>tested (same symptoms) on:
>FreeBSD 6.0-RELEASE GENERIC
>FreeBSD 6.0-RELEASE [custom kernel, some modules removed, crypto() added]
>FreeBSD 6.1-BETA4 GENERIC
>
>"dmesg" of the BETA4-GENERIC:
>Copyright (c) 1992-2006 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 6.1-BETA4 #0: Tue Mar 14 13:59:38 UTC 2006
> root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
>ACPI APIC Table: <A M I OEMAPIC >
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.02-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
>
>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
>,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
> AMD Features=0x20000000<LM>
> Hyperthreading: 2 logical CPUs
>real memory = 2147274752 (2047 MB)
>avail memory = 2096422912 (1999 MB)
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ioapic1 <Version 2.0> irqs 24-47 on motherboard
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <A M I OEMRSDT> on motherboard
>acpi0: Power Button (fixed)
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>cpu0: <ACPI CPU> on acpi0
>acpi_throttle0: <ACPI CPU Throttling> on cpu0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <unknown> at device 0.1 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>pci2: <network, ethernet> at device 0.0 (no driver attached)
>pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>amr0: <LSILogic MegaRAID 1.53> mem 0xddff0000-0xddffffff irq 24 at device
>1.0 on pci3
>amr0: <LSILogic Intel(R) RAID Controller SRCS16> Firmware 713Q, BIOS G401,
>64MB RAM
>uhci0: <UHCI (generic) USB controller> port 0xcf00-0xcf1f irq 16 at device
>29.0 on pci0
>uhci0: [GIANT-LOCKED]
>usb0: <UHCI (generic) USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <UHCI (generic) USB controller> port 0xcf80-0xcf9f irq 19 at device
>29.1 on pci0
>uhci1: [GIANT-LOCKED]
>usb1: <UHCI (generic) USB controller> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>pci0: <base peripheral> at device 29.4 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 29.5 (no driver
>attached)
>ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xdecffc00-0xdecfffff irq 23
>at device 29.7 on pci0
>ehci0: [GIANT-LOCKED]
>usb2: EHCI version 1.0
>usb2: companion controllers, 2 ports each: usb0 usb1
>usb2: <Intel 6300ESB USB 2.0 controller> on ehci0
>usb2: USB revision 2.0
>uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>uhub2: 4 ports with 4 removable, self powered
>umass0: Kingston DataTraveler 2.0, rev 2.00/1.00, addr 2
>pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>pci4: <display, VGA> at device 2.0 (no driver attached)
>em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
>0xee80-0xeebf mem 0xdefa0000-0xdefbffff irq 17 at device 3.0 on pci4
>em0: Ethernet address: 00:0e:0c:6a:a6:41
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel 6300ESB UDMA100 controller> port
>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
>ata0: <ATA channel 0> on atapci0
>ata1: <ATA channel 1> on atapci0
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>acpi_button0: <Power Button> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: model IntelliMouse, device ID 3
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
>acpi0
>sio0: type 16550A
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
>sio1: type 16550A
>fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
>acpi0
>fdc0: [FAST]
>pmtimer0 on isa0
>orm0: <ISA Option ROMs> at iomem
>0xc0000-0xc7fff,0xca800-0xcb7ff,0xcb800-0xcc7ff on isa0
>ppc0: parallel port not found.
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounter "TSC" frequency 2793015526 Hz quality 800
>Timecounters tick every 1.000 msec
>acd0: CDROM <SR244W/T01A> at ata1-slave UDMA33
>amrd0: <LSILogic MegaRAID logical drive> on amr0
>amrd0: 381469MB (781248512 sectors) RAID 1 (optimal)
>amrd1: <LSILogic MegaRAID logical drive> on amr0
>amrd1: 381469MB (781248512 sectors) RAID 1 (optimal)
>da0 at umass-sim0 bus 0 target 0 lun 0
>da0: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI-0 device
>da0: 40.000MB/s transfers
>da0: 246MB (503808 512 byte sectors: 64H 32S/T 246C)
>Trying to mount root from ufs:/dev/da0s1a
>
>"ifconfig -a" output:
>em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> options=b<RXCSUM,TXCSUM,VLAN_MTU>
> ether 00:0e:0c:6a:a6:41
> media: Ethernet autoselect
> status: no carrier
>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
> inet 127.0.0.1 netmask 0xff000000
>
>
></mail>
>
>_______________________________________________
>freebsd-questions@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20060329074523.028fd450>