Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 12 Nov 1998 16:42:30 +0000
From:      Roger Hardiman <roger@cs.strath.ac.uk>
To:        Bill Trost <trost@cloud.rain.com>
Cc:        mobile@FreeBSD.ORG
Subject:   Re: Probing for 21 PCI busses
Message-ID:  <364B0FF6.7DE1@cs.strath.ac.uk>
References:  <364AB5E3.167E@cs.strath.ac.uk> <4383.910888096@cloud.rain.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Bill Trost wrote:
> 
> Roger Hardiman writes:
>      I just installed 3.0-RELEASE on my Libretto 100CT.
>      The boot sequence works fine, but it probes for 21 PCI busses
> 
> How many does it find?   (-:

Actually it probes for 22 PCI busses, PCI 0 through to PCI 21.
Output of my dmesg is as follows:

Bye
Roger
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California. All rights reserved.
FreeBSD 3.0-RELEASE #2: Wed Nov 11 13:04:56 GMT 1998
    root@kyle.dmem.strath.ac.uk:/usr/src/sys/compile/kyle
Timecounter "i8254"  frequency 1193182 Hz  cost 3368 ns
CPU: Pentium/P55C (quarter-micron) (166.63-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x581  Stepping=1
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 33685504 (32896K bytes)
avail memory = 31080448 (30352K bytes)
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1179 device=0601)> rev 0x2e on
pci0.0.0
vga0: <NeoMagic NM3160 laptop SVGA controller> rev 0x01 int a irq 255 on
pci0.4.0
chip1: <PCI to CardBus bridge (vendor=1179 device=060f)> rev 0x20 int a
irq 255 on pci0.19.0
chip2: <PCI to CardBus bridge (vendor=1179 device=060f)> rev 0x20 int b
irq 255 on pci0.19.1
Probing for devices on PCI bus 1:
Probing for devices on PCI bus 2:
Probing for devices on PCI bus 3:
Probing for devices on PCI bus 4:
Probing for devices on PCI bus 5:
Probing for devices on PCI bus 6:
Probing for devices on PCI bus 7:
Probing for devices on PCI bus 8:
Probing for devices on PCI bus 9:
Probing for devices on PCI bus 10:
Probing for devices on PCI bus 11:
Probing for devices on PCI bus 12:
Probing for devices on PCI bus 13:
Probing for devices on PCI bus 14:
Probing for devices on PCI bus 15:
Probing for devices on PCI bus 16:
Probing for devices on PCI bus 17:
Probing for devices on PCI bus 18:
Probing for devices on PCI bus 19:
Probing for devices on PCI bus 20:
Probing for devices on PCI bus 21:
Probing for PnP devices:             

Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
... try to identify the yamaha
pcm0 at 0x530 irq 5 drq 1 flags 0xc115 on isa
mss_attach <mss>0 at 0x530 irq 5 dma 1:5 flags 0xc115
setting up yamaha registers
set yamaha master volume to maxsio0 at 0x3f8-0x3ff irq 4 flags 0x10 on
isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1 not found at 0x2f8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa
wdc0: unit 0 (wd0): <TOSHIBA MK2105MAT>, 32-bit, multi-block-16
wd0: 2067MB (4233600 sectors), 4200 cyls, 16 heads, 63 S/T, 512 B/S
zp: found card in slot 0
zp0 at 0x300-0x30f irq 10 maddr 0xd8000 on isa
zp0: aui/bnc/utp address 00:60:97:ca:6c:69
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium F00F detected, installing workaround
changing root device to wd0s2a

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?364B0FF6.7DE1>