Date: Sat, 16 May 2020 21:05:18 +0200 From: Rodrigo Osorio <rodrigo@osorio.me> To: freebsd-arm@freebsd.org Subject: Issues with the pine A64+ board (no ethernet, hdmi stops, etc) Message-ID: <1869c25d-aa2f-bcbc-d255-1bbca4721328@osorio.me>
next in thread | raw e-mail | index | archive | help
Hi, Today I try to run pine64 images in my pine A64+ board[1] and found some blocking issues: - No ethernet device not found - No sound device - Only one USB connector seems to work - HDMI only work during the first part of the boot sequence (tested with the 12.1 only) - pciconf -lv result is empty I try the 12.0-RELEASE , 12.1-RELEASE and 13.0-CURRENT (20200514) 12.0: Serial output: http://files.osorio.me/pine64-logs/pine64-12.0.boot.txt 12.1: Serial output: http://files.osorio.me/pine64-logs/pine64-12.1.boot.txt Errors: Module simplebus/awg failed to register: 17 Module awg/miibus failed to register: 17 13.0: Serial output: http://files.osorio.me/pine64-logs/pine64-13-20200514.boot.txt I also did the test with the 12.1-RELEASE LTS, but u-boot fails with the following message: U-Boot SPL 2019.07 (Nov 01 2019 - 01:52:40 +0000) DRAM: 0 MiB ### ERROR ### Please RESET the board ### Hope this helps, All the best, -- rodrigo [1] https://www.pine64.org/devices/single-board-computers/pine-a64/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1869c25d-aa2f-bcbc-d255-1bbca4721328>