Date: Mon, 22 Aug 2011 15:57:45 -0700 From: Herr Virek <josefvirek@gmail.com> To: freebsd-sparc64@freebsd.org Subject: V440 with 1.593GHz CPU has scsi errors on LSILogic 1030 Ultra4 controller Message-ID: <CAA7xWvWtj-vyoM242a4dYBMikO4-PhLGo8aBnsjaSo%2Bvs=AD_g@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello. I have a four cpu V440 running current well for a while now. Tried to install on another V440 with this CPU and I have scsi errors until panic when booting off CD or a hard drive with 8.2 installed Has anyone seen issues with this particular CPU? http://www.sunshack.org/data/sh/2.1.8/infoserver.central/data/syshbk/Devices/System_Board/SYSBD_SunFireV440_CPU.html#6788 I've swapped disks and optical drives a few times. S10 U8 seems OK so I'm not sure where to start on this one. I've also tried with auto-boot? false and true. Thanks!. PS - Thanks everyone for your work. I love running FreeBSD on v240 and v440. ---------------- Rebooting with command: boot Boot device: disk File and args: >> FreeBSD/sparc64 boot block Boot path: /pci@1f,700000/scsi@2/disk@0,0:a Boot loader: /boot/loader Consoles: Open Firmware console Booting with sun4u support. FreeBSD/sparc64 bootstrap loader, Revision 1.0 (root@v240, Tue Mar 1 00:21:58 UTC 2011) bootpath="/pci@1f,700000/scsi@2/disk@0,0:a" Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x9d3748+0x7f668 syms=[0x8+0xa9db8+0x8+0x9c673] - Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... jumping to kernel entry at 0xc0088000. Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-RELEASE-p2 #2: Thu Jun 16 17:49:38 UTC 2011 root@v240:/usr/obj/usr/src/sys/GENERIC sparc64 real memory = 17179869184 (16384 MB) avail memory = 16817340416 (16038 MB) cpu0: Sun Microsystems UltraSparc-IIIi Processor (1593.00 MHz CPU) cpu1: Sun Microsystems UltraSparc-IIIi Processor (1593.00 MHz CPU) cpu2: Sun Microsystems UltraSparc-IIIi Processor (1593.00 MHz CPU) cpu3: Sun Microsystems UltraSparc-IIIi Processor (1593.00 MHz CPU) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs ispfw: registered firmware <isp_1000> ispfw: registered firmware <isp_1040> ispfw: registered firmware <isp_1040_it> ispfw: registered firmware <isp_1080> ispfw: registered firmware <isp_1080_it> ispfw: registered firmware <isp_12160> ispfw: registered firmware <isp_12160_it> ispfw: registered firmware <isp_2100> ispfw: registered firmware <isp_2200> ispfw: registered firmware <isp_2300> ispfw: registered firmware <isp_2322> ispfw: registered firmware <isp_2400> ispfw: registered firmware <isp_2400_multi> ispfw: registered firmware <isp_2500> ispfw: registered firmware <isp_2500_multi> kbd0 at kbdmux0 nexus0: <Open Firmware Nexus device> pcib0: <Sun Host-PCI bridge> mem 0x4000e600000-0x4000e60afff,0x4000e410000-0x4000e41701f,0x7ce00000000-0x7ce000000ff,0x4000e780000-0x4000e78ffff irq 1842,1840,1841,1844,1838 on nexus0 pcib0: Tomatillo, version 4, IGN 0x1c, bus A, 66MHz pcib0: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries pcib0: [FILTER] pcib0: [FILTER] pcib0: [FILTER] pcib0: [FILTER] pci0: <OFW PCI bus> on pcib0 pcib1: <Sun Host-PCI bridge> mem 0x4000ef00000-0x4000ef0afff,0x4000ec10000-0x4000ec1701f,0x7c600000000-0x7c6000000ff,0x4000ef80000-0x4000ef8ffff irq 1907,1904,1905,1908,1903 on nexus0 pcib1: Tomatillo, version 4, IGN 0x1d, bus B, 66MHz pcib1: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries pcib1: [FILTER] pci1: <OFW PCI bus> on pcib1 pcib2: <Sun Host-PCI bridge> mem 0x4000f600000-0x4000f60afff,0x4000f410000-0x4000f41701f,0x7fe00000000-0x7fe000000ff,0x4000f780000-0x4000f78ffff irq 1970,1968,1969,1972,1964 on nexus0 pcib2: Tomatillo, version 4, IGN 0x1e, bus A, 33MHz pcib2: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries pcib2: [FILTER] pcib2: [FILTER] pcib2: [FILTER] pcib2: [FILTER] pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCI-PCI bridge> at device 4.0 on pci2 pci3: <OFW PCI bus> on pcib3 pcib4: <Sun Host-PCI bridge> mem 0x4000ff00000-0x4000ff0afff,0x4000fc10000-0x4000fc1701f,0x7f600000000-0x7f6000000ff,0x4000ff80000-0x4000ff8ffff irq 2035,2032,2033,2036,2029 on nexus0 pcib4: Tomatillo, version 4, IGN 0x1f, bus B, 66MHz pcib4: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries pcib4: [FILTER] pci4: <OFW PCI bus> on pcib4 nexus0: <memory-controller> mem 0x40000000000-0x40000000007 type memory-controller (no driver attached) nexus0: <memory-controller> mem 0x40000800000-0x40000800007 type memory-controller (no driver attached) nexus0: <memory-controller> mem 0x40001000000-0x40001000007 type memory-controller (no driver attached) nexus0: <memory-controller> mem 0x40001800000-0x40001800007 type memory-controller (no driver attached) cas0: <Sun Cassini+ Gigabit Ethernet> mem 0x200000-0x3fffff at device 2.0 on pci0 miibus0: <MII bus> on cas0 brgphy0: <BCM5754 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow cas0: 16kB RX FIFO, 9kB TX FIFO cas0: Ethernet address: 00:03:ba:c3:d2:49 cas0: [FILTER] jbusppm0: <JBus power management> mem 0x4000e000000-0x4000e000007,0x4000e410050-0x4000e41005f on nexus0 isab0: <PCI-ISA bridge> at device 7.0 on pci2 isa0: <ISA bus> on isab0 cas1: <Sun Cassini+ Gigabit Ethernet> mem 0x200000-0x3fffff at device 0.0 on pci3 miibus1: <MII bus> on cas1 brgphy1: <BCM5401 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow cas1: 16kB RX FIFO, 9kB TX FIFO cas1: Ethernet address: 00:03:ba:c3:d2:49 cas1: [FILTER] pci2: <old, non-VGA display device> at device 6.0 (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1000000-0x1000fff at device 10.0 on pci2 ohci0: [ITHREAD] usbus0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x2000000-0x2000fff at device 11.0 on pci2 ohci1: [ITHREAD] usbus1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1 atapci0: <AcerLabs M5229 UDMA100 controller> port 0x900-0x907,0x918-0x91b,0x910-0x917,0x908-0x90b,0x920-0x92f at device 13.0 on pci2 atapci0: [ITHREAD] atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] jbusppm1: <JBus power management> mem 0x4000f000000-0x4000f000007,0x4000f410050-0x4000f41005f on nexus0 cas2: <Sun Cassini+ Gigabit Ethernet> mem 0x200000-0x3fffff at device 1.0 on pci4 miibus2: <MII bus> on cas2 brgphy2: <BCM5754 10/100/1000baseTX PHY> PHY 1 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow cas2: 16kB RX FIFO, 9kB TX FIFO cas2: Ethernet address: 00:03:ba:c3:d2:49 cas2: [FILTER] mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x300-0x3ff mem 0x400000-0x40ffff,0x410000-0x41ffff at device 2.0 on pci4 mpt0: [ITHREAD] mpt0: MPI Version=1.2.12.0 mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE ) mpt0: 0 Active Volumes (1 Max) mpt0: 0 Hidden Drive Members (6 Max) mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x400-0x4ff mem 0x420000-0x42ffff,0x430000-0x43ffff at device 2.1 on pci4 mpt1: [ITHREAD] mpt1: MPI Version=1.2.12.0 mpt1: Capabilities: ( RAID-1E RAID-1 SAFTE ) mpt1: 0 Active Volumes (1 Max) mpt1: 0 Hidden Drive Members (6 Max) nexus0: <i2c> mem 0x4000fc64000-0x4000fc6400f type i2c (no driver attached) nexus0: <syscons> type unknown (no driver attached) rtc0: <Real-Time Clock> at port 0x70-0x71 on isa0 uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 34 on isa0 uart0: [FILTER] uart0: console (9600,n,8,1) uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 34 on isa0 uart1: [FILTER] Timecounter "tick" frequency 1593000000 Hz quality 10 Timecounter "stick" frequency 10000000 Hz quality 10 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <AcerLabs> at usbus0 uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <AcerLabs> at usbus1 uhub1: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered acd0: DVDROM <TOSHIBA DVD-ROM SD-C2612/1011> at ata2-master UDMA33 (probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:mpt0:0:0:0): CAM status: SCSI Status Error (probe0:mpt0:0:0:0): SCSI status: Check Condition (probe0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,0 (SCSI parity error) (probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:mpt0:0:0:0): CAM status: SCSI Status Error (probe0:mpt0:0:0:0): SCSI status: Check Condition (probe0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,0 (SCSI parity error) (probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:mpt0:0:0:0): CAM status: SCSI Status Error (probe0:mpt0:0:0:0): SCSI status: Check Condition (probe0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,0 (SCSI parity error) (probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:mpt0:0:0:0): CAM status: SCSI Status Error (probe0:mpt0:0:0:0): SCSI status: Check Condition (probe0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:47,0 (SCSI parity error) (probe0:mpt0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:mpt0:0:0:0): CAM status: SCSI Status Error (probe0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 10 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) mpt0: EvtLogData: IOCLogInfo: 0x110a0000 mpt0: EvtLogData: Event Data: 10000205 mpt0: mpt_cam_event: 0x1 (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f dd 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) mpt0: EvtLogData: IOCLogInfo: 0x110a0000 mpt0: EvtLogData: Event Data: 10000205 mpt0: mpt_cam_event: 0x1 (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 1 3f df 0 0 0 10 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) Trying to mount root from ufs:/dev/da0a (da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 60 4 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 8d 40 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) g_vfs_done():da0a[READ(offset=18513920, length=131072)]error = 5 vnode_pager_getpages: I/O read error exec /sbin/init: error 5 mpt0: EvtLogData: IOCLogInfo: 0x110a0000 mpt0: EvtLogData: Event Data: 10000205 mpt0: mpt_cam_event: 0x1 (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(10). CDB: 28 0 0 0 35 20 0 1 0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) g_vfs_done():da0a[READ(offset=6963200, length=131072)]error = 5 vnode_pager_getpages: I/O read error exec /sbin/init.bak: error 5 (da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) (da0:mpt0:0:0:0): READ(6). CDB: 8 0 21 e0 e0 0 (da0:mpt0:0:0:0): CAM status: SCSI Status Error (da0:mpt0:0:0:0): SCSI status: Check Condition (da0:mpt0:0:0:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received) g_vfs_done():da0a[READ(offset=4440064, length=114688)]error = 5 vnode_pager_getpages: I/O read error exec /rescue/init: error 5 init: not found in path /sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init:/stand/sysinstall panic: no init cpuid = 2 KDB: stack backtrace: #0 0xc038fb14 at start_init+0x3d4 #1 0xc03b1c40 at fork_exit+0x80 #2 0xc00891e8 at fork_trampoline+0x8 Also pasted in here; http://pastebin.com/Pdy6Xau3 - Eric
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAA7xWvWtj-vyoM242a4dYBMikO4-PhLGo8aBnsjaSo%2Bvs=AD_g>