Date: Sun, 2 Nov 2008 21:37:05 +0100 From: "Dominique Goncalves" <dominique.goncalves@gmail.com> To: freebsd-multimedia@freebsd.org Subject: No sound with M-AUDIO DELTA 1010LT and snd_envy24 Message-ID: <7daacbbe0811021237p1c3c823bj97b481463433e6d9@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi, I use FreeBSD 7.1-PRERELEASE and a M-AUDIO DELTA 1010LT sound card. The sound card seems to be detected correctly but there is no sound (It works on Windows XP and Ubuntu 7.10, it's not a problem of setup with cable). By the way I use the analog output (1 and 2). I tried with mplayer, it plays correctly without error but no sound. %cat /boot/kernel/kernel > /dev/dsp0.0 load: 0.57 cmd: cat 2184 [pcmwr] 0.00u 0.00s 0% 772k ^C It produce also no sound. Is there a problem with my configuration or no support in snd_envy24(4) for my sound card ? Envy24Control [1] from ALSA project helps a lot to configure this sound card, is there an alternative in FreeBSD? [1] http://alsa.opensrc.org/Envy24Control Thanks for your help, Regards. %sysctl hw.snd hw.snd.latency_profile: 1 hw.snd.latency: 5 hw.snd.report_soft_formats: 1 hw.snd.compat_linux_mmap: 0 hw.snd.feeder_buffersize: 16384 hw.snd.feeder_rate_round: 25 hw.snd.feeder_rate_max: 2016000 hw.snd.feeder_rate_min: 1 hw.snd.verbose: 1 hw.snd.maxautovchans: 16 hw.snd.default_unit: 0 hw.snd.version: 2007061600/i386 hw.snd.default_auto: 0 %mixer Mixer vol is currently set to 78:78 Mixer bass is currently set to 0:0 Mixer treble is currently set to 0:0 Mixer synth is currently set to 0:0 Mixer pcm is currently set to 81:81 Mixer speaker is currently set to 0:0 Mixer line is currently set to 75:75 Mixer mic is currently set to 0:0 Mixer cd is currently set to 0:0 Mixer mix is currently set to 0:0 Recording source: mic %mixer speaker 50:50 Setting the mixer speaker from 0:0 to 50:50. mixer: WRITE_MIXER: Device not configured %kldstat Id Refs Address Size Name 1 16 0xc0400000 97d3ac kernel 2 1 0xc0d7e000 90d0 snd_envy24.ko 3 4 0xc0d88000 4a62c sound.ko 4 2 0xc0dd3000 2a58 snd_spicds.ko 5 1 0xc0dd6000 6f88 snd_ich.ko 6 1 0xc0ddd000 4d20 atapicam.ko 7 1 0xc0de2000 6a2c4 acpi.ko 8 1 0xc413d000 21000 radeon.ko 9 1 0xc415e000 f000 drm.ko 10 1 0xc4a67000 7000 udf.ko %pciconf -vl hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x06461039 rev=0x00 hdr=0x00 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS645DX Host-to-PCI Bridge' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x00000000 chip=0x00011039 rev=0x00 hdr=0x01 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS730 Virtual PCI-to-PCI bridge (AGP)' class = bridge subclass = PCI-PCI isab0@pci0:0:2:0: class=0x060100 card=0x00000000 chip=0x00081039 rev=0x04 hdr=0x00 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS PCI to ISA Bridge (LPC Bridge)' class = bridge subclass = PCI-ISA atapci0@pci0:0:2:5: class=0x010180 card=0x55131039 chip=0x55131039 rev=0x00 hdr=0x00 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS5513 EIDE Controller (A,B step)' class = mass storage subclass = ATA ohci0@pci0:0:3:0: class=0x0c0310 card=0x56701462 chip=0x70011039 rev=0x0f hdr=0x00 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS5597/8 Universal Serial Bus Controller' class = serial bus subclass = USB ohci1@pci0:0:3:1: class=0x0c0310 card=0x56701462 chip=0x70011039 rev=0x0f hdr=0x00 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS5597/8 Universal Serial Bus Controller' class = serial bus subclass = USB ohci2@pci0:0:3:2: class=0x0c0310 card=0x56701462 chip=0x70011039 rev=0x0f hdr=0x00 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS5597/8 Universal Serial Bus Controller' class = serial bus subclass = USB ehci0@pci0:0:3:3: class=0x0c0320 card=0x56701462 chip=0x70021039 rev=0x00 hdr=0x00 vendor = 'Silicon Integrated Systems (SiS)' device = 'SiS7002 USB 2.0 Enhanced Host Controller' class = serial bus subclass = USB pcm0@pci0:0:8:0: class=0x040100 card=0xd63b1412 chip=0x17121412 rev=0x02 hdr=0x00 vendor = 'VIA Technologies Inc (Was: IC Ensemble Inc)' device = 'ICE1712 Envy24 Multichannel Audio Controller' class = multimedia subclass = audio rl0@pci0:0:11:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter' class = network subclass = ethernet vgapci0@pci0:1:0:0: class=0x030000 card=0x7194174b chip=0x49661002 rev=0x01 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'RV250 Radeon 9000/9000 Pro' class = display subclass = VGA Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-PRERELEASE #0: Fri Sep 26 23:16:45 CEST 2008 root@djdomics:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e4e000. Preloaded elf module "/boot/kernel/snd_envy24.ko" at 0xc0e4e1a8. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0e4e258. Preloaded elf module "/boot/kernel/snd_spicds.ko" at 0xc0e4e304. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0e4e3b4. Preloaded elf module "/boot/kernel/atapicam.ko" at 0xc0e4e460. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e4e510. Calibrating clock(s) ... i8254 clock: 1193167 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2000146912 Hz CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (2000.15-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries 1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size Trace cache: 12K-uops, 8-way set associative 2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size real memory = 805240832 (767 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000002f229fff, 773869568 bytes (188933 pages) avail memory = 773971968 (738 MB) Table 'FACP' at 0x2fff0030 Table 'APIC' at 0x2fff00c0 MADT: Found table at 0x2fff00c0 MP Configuration Table version 1.4 found at 0xc00f61f0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) ACPI APIC Table: <AMIINT SiS645XX> bios32: Found BIOS32 Service Directory header at 0xc00fdb00 bios32: Entry = 0xfdb10 (c00fdb10) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb31 pnpbios: Found PnP BIOS data at 0xc00f74a0 pnpbios: Entry = f0000:642b Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ACPI: RSDP @ 0x0xfa170/0x0014 (v 0 AMI ) ACPI: RSDT @ 0x0x2fff0000/0x002C (v 1 AMIINT SiS645XX 0x00000010 MSFT 0x0100000B) ACPI: FACP @ 0x0x2fff0030/0x0081 (v 1 AMIINT SiS645XX 0x00000011 MSFT 0x0100000B) ACPI: DSDT @ 0x0x2fff0110/0x3588 (v 1 SiS 645 0x00001000 MSFT 0x0100000D) ACPI: FACS @ 0x0x2fff8000/0x0040 ACPI: APIC @ 0x0x2fff00c0/0x0050 (v 1 AMIINT SiS645XX 0x00001000 MSFT 0x0100000B) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 1.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Sep 26 2008 23:16:12) npx0: INT 16 interface acpi0: <AMIINT SiS645XX> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xd30d6000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000208 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06461039) pcibios: BIOS version 2.10 AcpiOsDerivePciId: \\_SB_.PCI0.TMEM -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 2 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX1 -> bus 0 dev 2 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 12 N 0 3 4 5 7 10 11 12 14 15 Validation 0 12 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 12 N 0 3 4 5 7 10 11 12 14 15 Validation 0 12 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 10 11 12 14 15 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x1039, dev=0x0646, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type Memory, range 32, base 0xe0000000, size 26, enabled found-> vendor=0x1039, dev=0x0001, revid=0x00 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0008, revid=0x04 domain=0, bus=0, slot=2, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x5513, revid=0x00 domain=0, bus=0, slot=2, func=5 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled found-> vendor=0x1039, dev=0x7001, revid=0x0f domain=0, bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xdfffc000, size 12, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 20 found-> vendor=0x1039, dev=0x7001, revid=0x0f domain=0, bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=b, irq=10 map[10]: type Memory, range 32, base 0xdfffd000, size 12, enabled pcib0: matched entry for 0.3.INTB pcib0: slot 3 INTB hardwired to IRQ 21 found-> vendor=0x1039, dev=0x7001, revid=0x0f domain=0, bus=0, slot=3, func=2 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=c, irq=12 map[10]: type Memory, range 32, base 0xdfffe000, size 12, enabled pcib0: matched entry for 0.3.INTC pcib0: slot 3 INTC hardwired to IRQ 22 found-> vendor=0x1039, dev=0x7002, revid=0x00 domain=0, bus=0, slot=3, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdffff000, size 12, enabled pcib0: matched entry for 0.3.INTD pcib0: slot 3 INTD hardwired to IRQ 23 found-> vendor=0x1412, dev=0x1712, revid=0x02 domain=0, bus=0, slot=8, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=12 powerspec 1 supports D0 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xdc00, size 5, enabled map[14]: type I/O Port, range 32, base 0xd800, size 4, enabled map[18]: type I/O Port, range 32, base 0xd400, size 4, enabled map[1c]: type I/O Port, range 32, base 0xd000, size 6, enabled pcib0: matched entry for 0.8.INTA pcib0: slot 8 INTA hardwired to IRQ 19 found-> vendor=0x10ec, dev=0x8139, revid=0x10 domain=0, bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xcc00, size 8, enabled map[14]: type Memory, range 32, base 0xdfffbf00, size 8, enabled pcib0: matched entry for 0.11.INTA pcib0: slot 11 INTA hardwired to IRQ 18 agp0: <SiS 645DX host to AGP bridge> on hostb0 hostb0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 2 pcib1: I/O decode 0xa000-0xafff pcib1: memory decode 0xdfd00000-0xdfefffff pcib1: prefetched decode 0xcfa00000-0xdfbfffff pci1: <PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x1002, dev=0x4966, revid=0x01 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0187, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 27, enabled pcib1: requested memory range 0xd0000000-0xd7ffffff: good map[14]: type I/O Port, range 32, base 0xa800, size 8, enabled pcib1: requested I/O range 0xa800-0xa8ff: in range map[18]: type Memory, range 32, base 0xdfef0000, size 16, enabled pcib1: requested memory range 0xdfef0000-0xdfefffff: good pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 vgapci0: <VGA-compatible display> port 0xa800-0xa8ff mem 0xd0000000-0xd7ffffff,0xdfef0000-0xdfefffff irq 16 at device 0.0 on pci1 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=10 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50 ata1: [MPSAFE] ata1: [ITHREAD] ohci0: <SiS 5571 USB controller> mem 0xdfffc000-0xdfffcfff irq 20 at device 3.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffc000 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 51 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xdfffd000-0xdfffdfff irq 21 at device 3.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffd000 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 52 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: <SiS 5571 USB controller> mem 0xdfffe000-0xdfffefff irq 22 at device 3.2 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffe000 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: <SiS 5571 USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdffff000-0xdfffffff irq 23 at device 3.3 on pci0 ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdffff000 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on uhub3 umass0:0:0:-1: Attached to scbus0 pcm0: <Envy24 audio (Generic)> port 0xdc00-0xdc1f,0xd800-0xd80f,0xd400-0xd40f,0xd000-0xd03f irq 19 at device 8.0 on pci0 pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xdc00 pcm0: Reserved 0x10 bytes for rid 0x14 type 4 at 0xd800 pcm0: Reserved 0x10 bytes for rid 0x18 type 4 at 0xd400 pcm0: Reserved 0x40 bytes for rid 0x1c type 4 at 0xd000 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 55 pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: system configuration SubVendorID: 0xd63b, SubDeviceID: 0x1412 XIN2 Clock Source: 22.5792MHz(44.1kHz*512) MPU-401 UART(s) #: 1 AC'97 codec: not exist ADC #: 4 DAC #: 4 Multi-track converter type: I2S(96KHz support, 24bit resolution, ID#0x2) S/PDIF(IN/OUT): 1/1 ID# 0x00 GPIO(mask/dir/state): 0x04/0xfb/0x7e pcm0: Mixer "vol": pcm0: Mixer "bass": pcm0: Mixer "treble": pcm0: Mixer "synth": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "mix": pcm0: clone manager: deadline=750ms flags=0x8000001e rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 0xdfffbf00-0xdfffbfff irq 18 at device 11.0 on pci0 rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xcc00 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:10:dc:82:9b:d2 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 56 rl0: [MPSAFE] rl0: [ITHREAD] fdc0: <floppy drive controller> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x1c01 0x1c11 0x1c01 0x1c01 sio0: irq maps: 0x1c01 0x1c11 0x1c01 0x1c01 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58 sio0: [FILTER] sio1: irq maps: 0x1c01 0x1c09 0x1c01 0x1c01 sio1: irq maps: 0x1c01 0x1c09 0x1c01 0x1c01 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 59 sio1: [FILTER] cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode p4tcc0: <CPU Frequency Thermal Control> on cpu0 ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it unknown: status reg test failed fe unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcf7ff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 60 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: strange result for test aux port (1). psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ioapic0: routing intpin 7 (ISA IRQ 7) to vector 61 ppbus0: [MPSAFE] ppbus0: [ITHREAD] ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ums0: <Logitech USB Mouse, class 0/0, rev 1.10/6.10, addr 2> on uhub2 ums0: 3 buttons and Z dir. Device configuration finished. procfs registered lapic: Divisor 2, Frequency 50003675 hz Timecounter "TSC" frequency 2000146912 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire atapicam: atapicam0 already exists; skipping it ad0: setting PIO4 on 5513 chip ad0: setting UDMA100 on 5513 chip ad0: 57241MB <Seagate ST360012A 3.30> at ata0-master UDMA100 ad0: 117231408 sectors [28733C/16H/255S] 16 sectors/interrupt 1 depth queue ad0: Silicon Integrated Systems check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ad1: setting PIO4 on 5513 chip ad1: setting UDMA100 on 5513 chip ad1: 57241MB <Seagate ST360015A 3.33> at ata0-slave UDMA100 ad1: 117231408 sectors [28733C/16H/255S] 16 sectors/interrupt 1 depth queue ad1: Silicon Integrated Systems check1 failed ad1: Adaptec check1 failed ad1: LSI (v3) check1 failed ad1: LSI (v2) check1 failed ad1: FreeBSD check1 failed ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on 5513 chip acd0: setting UDMA33 on 5513 chip acd0: <HL-DT-STDVD-ROM GDR8161B/0100> DVDROM drive at ata1 as master acd0: read 3445KB/s (8268KB/s), 256KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: DVD 120mm audio disc acd1: setting PIO4 on 5513 chip acd1: setting UDMA33 on 5513 chip acd1: <HL-DT-ST GCE-8481B/1.00> CDRW drive at ata1 as slave acd1: read 6890KB/s (6890KB/s) write 688KB/s (8268KB/s), 2048KB buffer, UDMA33 acd1: Reads: CDR, CDRW, CDDA stream, packet acd1: Writes: CDR, CDRW, test write, burnproof acd1: Audio: play, 255 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc GEOM: new disk ad0 GEOM: new disk ad1 GEOM_LABEL: Label for provider acd0 is iso9660/SOMETHING. GEOM: new disk da0 pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device pass0: 40.000MB/s transfers da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1947MB (3987456 512 byte sectors: 255H 63S/T 248C) ATA PseudoRAID loaded acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe2:ata1:0:1:0): error 22 (probe2:ata1:0:1:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe1:ata1:0:0:0): error 22 (probe1:ata1:0:0:0): Unretryable Error pass1 at ata1 bus 0 target 1 lun 0 pass1: <HL-DT-ST CD-RW GCE-8481B 1.00> Removable CD-ROM SCSI-0 device pass1: 33.000MB/s transfers pass2 at ata1 bus 0 target 0 lun 0 pass2: <HL-DT-ST DVD-ROM GDR8161B 0100> Removable CD-ROM SCSI-0 device pass2: 33.000MB/s transfers (cd0:ata1:0:1:0): error 6 (cd0:ata1:0:1:0): Unretryable Error cd0 at ata1 bus 0 target 1 lun 0 cd0: <HL-DT-ST CD-RW GCE-8481B 1.00> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed cd1 at ata1 bus 0 target 0 lun 0 cd1: <HL-DT-ST DVD-ROM GDR8161B 0100> Removable CD-ROM SCSI-0 device cd1: 33.000MB/s transfers cd1: cd present [3837254 x 2048 byte records] GEOM: new disk cd0 GEOM: new disk cd1 GEOM_LABEL: Label for provider da0s1 is msdosfs/ . (cd0:ata1:0:1:0): error 6 (cd0:ata1:0:1:0): Unretryable Error (cd0:ata1:0:1:0): error 6 (cd0:ata1:0:1:0): Unretryable Error (cd0:ata1:0:1:0): error 6 (cd0:ata1:0:1:0): Unretryable Error (cd0:ata1:0:1:0): error 6 (cd0:ata1:0:1:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init drm0: <ATI Radeon If RV250 9000> on vgapci0 info: [drm] AGP at 0xe0000000 64MB info: [drm] Initialized radeon 1.25.0 20060524 vgapci0: Reserved 0x10000 bytes for rid 0x18 type 3 at 0xdfef0000 vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: Setting AGP v2 mode 4 info: [drm] Setting GART location based on new memory map info: [drm] Loading R200 Microcode info: [drm] writeback test succeeded in 1 usecs ioapic0: routing intpin 16 (PCI IRQ 16) to vector 62 drm0: [MPSAFE] drm0: [ITHREAD] umass0: at uhub3 port 5 (addr 2) disconnected (pass0:umass-sim0:0:0:0): lost device (pass0:umass-sim0:0:0:0): removing device entry (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry GEOM_LABEL: Label msdosfs/ removed. umass0: detached umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/2.00, addr 2> on uhub3 umass0:0:0:-1: Attached to scbus0 pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device pass0: 40.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1947MB (3987456 512 byte sectors: 255H 63S/T 248C) GEOM_LABEL: Label for provider da0s1 is msdosfs/ . GEOM_LABEL: Label msdosfs/ removed. GEOM_LABEL: Label for provider da0s1 is msdosfs/ . GEOM_LABEL: Label msdosfs/ removed. % -- There's this old saying: "Give a man a fish, feed him for a day. Teach a man to fish, feed him for life."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7daacbbe0811021237p1c3c823bj97b481463433e6d9>