Date: Thu, 10 Dec 1998 03:04:38 -0500 (EST) From: "James A. Mutter" <jmutter@netwalk.com> To: questions@FreeBSD.ORG Cc: x@xfree86.org, x@suse.de Subject: Problems with XFree86 3.3.3 & Diamond FireGL Message-ID: <Pine.BSF.4.05.9812100250350.11018-100000@insomnia.local.net>
next in thread | raw e-mail | index | archive | help
This one's a doosy.
Guys, I can't seem to get X working properly here. I'm starting X with
this command -
startx -- -bpp 24
Here's the output -
XFCom_3DLabs Version 4.10/ X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: 27 July 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. Please report problems to x@suse.de
Operating System: FreeBSD 2.2.5-RELEASE i386
Configured drivers:
GLINT: accelerated server for 3DLabs GLINT graphics adapters
(Patchlevel 0)
Using syscons driver with X support (version 2.0)
(using VT number 5)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: Microsoft, device: /dev/cuaa0, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) GLINT: Graphics device ID: "Diamond Fire GL 1000 PRO"
(**) GLINT: Monitor ID: "My Monitor"
(--) GLINT: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) GLINT: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) GLINT: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) GLINT: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75
dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts
/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X1
1R6/lib/X11/fonts/100dpi/"
(--) GLINT: found TI chip GLINT Permedia 2 at card #0 func #0 with base
0xe60000
00
(--) GLINT: Framebuffer address at 0xe5000000
(--) GLINT: videoram : 8192k
(--) GLINT: Using builtin RAMDAC of Permedia 2 chip
(--) GLINT: Fitted Memory type is : SGRAM
(--) GLINT: VGA core is : Enabled
(--) GLINT: Maximum allowed dot-clock: 150.000 MHz
(**) GLINT: Cannot support interlaced modes, deleting.
(**) GLINT: Cannot support interlaced modes, deleting.
(**) GLINT: Cannot support interlaced modes, deleting.
(**) GLINT: Mode "640x480": mode clock = 45.800
(**) GLINT: Mode "800x600": mode clock = 69.650
(**) GLINT: Mode "1024x768": mode clock = 115.500
(**) GLINT: Mode "1280x1024": mode clock = 135.000
(--) GLINT: Using XAA (XFree86 Acceleration Architecture)
(--) GLINT: XAA: Solid filled rectangles
(--) GLINT: XAA: Screen-to-screen copy
(--) GLINT: XAA: Using 10 128x128 areas for pixmap caching
(--) GLINT: XAA: Caching tiles
(--) GLINT: XAA: Horizontal and vertical lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm
-m us
-em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml
"Errors
from xkbcomp are not fatal to the X server" keymap/xfree86
/var/tmp/xfree86.xkm'
----------
Problem is that while it seems to be starting in 24bpp, it really isn't.
It's starting in what I think is 16bpp. Any ideas?
Below is the XF86Config.
<snipped out the mouse/joystick/mod path/etc...>
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-96
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 48-160
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor
spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817
Interlace
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445
-HSync +VS
ync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500
-HSync -VS
ync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628
+hsync +vs
ync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x400" 36 640 696 752 832 480 481 484 509
-HSync -VS
ync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985
Interlace
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666
+hsync +vs
ync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806
-hsync -vs
ync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530
-HSync -VS
ync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892
-HSync -VS
ync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657
-HSync -VS
ync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806
-hsync -vs
ync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165
Interlace
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640
-HSync -VS
ync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync
-VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068
-HSync -VSy
nc
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250
+HSync +VSy
nc
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802
-HSync -VSy
nc
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250
-HSync -VS
ync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902
-HSync -VS
ync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072
+HSync +VS
ync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250
+HSync +VS
ync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244
+HSync +VS
ync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072
-HSync -VS
ync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490
+HSync +VSy
nc
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490
+HSync +VSy
nc
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404
-HSync -VSy
nc
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388 404
-HSync -VSy
nc
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225
Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262
Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262
Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312
Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314
Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333
Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312
Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314
Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333
Doublescan
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Sample Device for accelerated server:
# Section "Device"
# Identifier "Actix GE32+ 2MB"
# VendorName "Actix"
# BoardName "GE32+"
# Ramdac "ATT20C490"
# Dacspeed 110
# Option "dac_8_bit"
# Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0
# Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0
# EndSection
# Sample Device for Hercules mono card:
# Section "Device"
# Identifier "Hercules mono"
# EndSection
# Device configured by xf86config:
Section "Device"
Identifier "Diamond Fire GL 1000 PRO"
VendorName "Unknown"
BoardName "Unknown"
#VideoRam 8192
#Option "no_accel"
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
#Section "Screen"
# Driver "svga"
# Device "Generic VGA"
# #Device "Diamond Fire GL 1000 PRO"
# Monitor "My Monitor"
# Subsection "Display"
# Depth 8
# #Modes "640x480" "800x600" "1024x768" "1280x1024"
# ViewPort 0 0
# Virtual 320 200
# #Virtual 1600 1280
# EndSubsection
#EndSection
# The 16-color VGA server
#Section "Screen"
# Driver "vga16"
# Device "Generic VGA"
# Monitor "My Monitor"
# Subsection "Display"
# Modes "640x480" "800x600"
# ViewPort 0 0
# Virtual 800 600
# EndSubsection
#EndSection
# The Mono server
#Section "Screen"
# Driver "vga2"
# Device "Generic VGA"
# Monitor "My Monitor"
# Subsection "Display"
# Modes "640x480" "800x600"
# ViewPort 0 0
# Virtual 800 600
# EndSubsection
#EndSection
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32,
Mach64)
Section "Screen"
Driver "accel"
Device "Diamond Fire GL 1000 PRO"
Monitor "My Monitor"
# Subsection "Display"
# Depth 8
# Modes "640x480" "800x600" "1024x768" "1280x1024"
# ViewPort 0 0
# EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
# Subsection "Display"
# Depth 32
# Modes "640x480" "800x600" "1024x768"
# ViewPort 0 0
# EndSubsection
EndSection
-------------
Sorry it had to be so lengthy - I wanted to make sure all of the
information was provided. :)
Anyhow, the system is:
PII/233 - AGP Diamond FireGL 1000 Pro - 3DLabs server (I recently
grabbed the binary of the server from xfree86.org, it was dated
11/30).
I'm really at a loss here. The output from startx doesn't seem to be
complaining about the color depth, but I can tell you by looking at it
that something is wrong.
Thanks for all your help.
Jim
-
- Failure isn't getting knocked down - Failure is not getting back up.
-
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9812100250350.11018-100000>