From owner-freebsd-questions Fri Sep 11 10:33:01 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id KAA01844 for freebsd-questions-outgoing; Fri, 11 Sep 1998 10:33:01 -0700 (PDT) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from smart-ras.smartweb.net (smart-ras.smartweb.net [207.202.14.60]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id KAA01831 for ; Fri, 11 Sep 1998 10:32:55 -0700 (PDT) (envelope-from turner@smartweb.net) Received: from newns (newns.smartweb.net [207.202.14.252]) by smart-ras.smartweb.net (8.7.3 Version 1.1 Build 566/8.7.3) with SMTP id NAA00248 for ; Fri, 11 Sep 1998 13:33:11 -0400 (Eastern Daylight Time) Message-ID: <35F95F03.6060@smartweb.net> Date: Fri, 11 Sep 1998 13:33:55 -0400 From: David Turner Reply-To: turner@smartweb.net X-Mailer: Mozilla 3.0 (WinNT; I) MIME-Version: 1.0 To: questions@FreeBSD.ORG Subject: adding scsi adapter Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Question, I am running freebsd 2.2.5 with the generic kernel. My system boots off of an IDE drive. I want to install an adaptec 2940 ultra scsi host adapter so that I can can also install a scsi tape drive for backup. I put the SCSI adapter in the computer and when it boots I get the following in the dmesg; ahc0 rev 1 int a irq 11 on pci0:17 ahc0: aic7880 Wide Channel, SCSI id=7, 16 SCBs ahc0 waiting for scsi devices to settle ahc0: board is not responding cmd fail (ahc0:0:0): SCB 0x1 timeout while recovery in progress (ahc0:0:0): "unknown unknown ????" type 13 fixed SCSI 0 uk0(ahc0:0:0):unknown I tried this with 2 Identicle adapters that I tested on NT so I know they are ok. I just don't know what I am doing. Can anyone point me in the right direction? Thanks, David Turner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message