Date: Thu, 6 May 2004 12:08:33 -0700 From: "James Hale" <jamesh@nucledyn.com> To: <freebsd-amd64@freebsd.org> Subject: Problem with a amd 64 Opteron and FreeBSD 5.2.1 Message-ID: <CFEEIBLIBOFJIEBNNBLNKELICMAA.jamesh@nucledyn.com>
next in thread | raw e-mail | index | archive | help
I've a problem with this amd64 OS and a Tyan Motherboard. This system locks up after about 5-7 hour during large data transfers. Any Suggestions? Below is the final message on the screen and below that is the machine configuration. Fatal Trap 12 Page Fault while in kernel mode Cpu =0 ; apic 10 =00 Fault Address=0x18 Fault Code=Supervisor Write, Page not present Instructor Pointer=0x8: 0xffffffff8020c5a7 Stack Pointer=0x10: 0xffffffffad412ba0 Frame Pointer=0x10: 0xffffffff51c3c0 Code Segment=base 0x0, limit 0xfffff type 0x1b =dpl 0, pres 1, long 1, def 32320, gran 1 processor eflags=interrupt enabled resume, iopl =0 current processes=16 (irq5 ; bge0 twe1) trap number=12 Panic: page Fault Cupid=0 Operating System FreeBSD AMD64 Chassis Chenbro Micom RM414 4U rackmount 550W+ PS Motherboard Tyan Thunder K8S Pro S2882G3NR SATA CPU AMD Opteron Model 244 (1.8GHz) Memory Four KINGSTON 1GB DIMM registered DDR PC3200 SATA RAID 3Ware 8506-8 SATA disk Eight Hitachi 250GB IDE 60GB system drive DVD RDWR+- DVD burner, notebook slim design During large data transfers the machine locks up complaining of page faults. Is the type of memory an issue with this design. Thanks Jim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CFEEIBLIBOFJIEBNNBLNKELICMAA.jamesh>