Date: Fri, 15 Aug 1997 04:45:28 -0700 From: John-Mark Gurney <gurney_j@efn.org> To: Luigi Rizzo <luigi@labinfo.iet.unipi.it> Cc: multimedia@FreeBSD.ORG Subject: Re: snd970814.tgz Message-ID: <19970815044528.39513@hydrogen.nike.efn.org> In-Reply-To: <199708140920.LAA06216@labinfo.iet.unipi.it>; from Luigi Rizzo on Thu, Aug 14, 1997 at 11:20:45AM %2B0200 References: <199708140920.LAA06216@labinfo.iet.unipi.it>
next in thread | previous in thread | raw e-mail | index | archive | help
Luigi Rizzo scribbled this message on Aug 14: > I would appreciate feedback from -multimedia on how the driver works on > your cards, and from -hackers about the PnP configuration stuff (both > code and documentation). well... I must say, I'm REALLY pleased with this... my only complaint is that my sound card gets assigned to pcm1 instead of pcm0... I only have "device pcm0" in my config file, and nothing else... but other than that, it's good to have this card working... I haven't tried full duplex with this card, but 44k/16bit does work nicely... oh, just found one little problem... when playing 22k/16bit, (mpeg3) and decide to change volumes, it stutters... but it doesn't do that when playing 44k/8bit... /dev/sndstat: FreeBSD Sound Driver Aug 15 1997 03:38:05 Installed devices: pcm1: <CS4237> at 0x0530 irq 5 dma 1:3 dmesg: CSN 1 Vendor ID: CSC4237 [0x3742630e] Serial 0xffffffff port 0x0534 0x0388 0x0220 0x0000 irq 5:0 drq 1:3 mss_attach <CS4237>1 at 0x 530 irq 5 dma 1:3 flags 0x 10013 dev 3 reg 4 old 0x07 new 0x04 dev 4 reg 6 old 0x08 new 0x0b dev 5 reg 26 old 0x45 new 0x42 dev 6 reg 18 old 0x09 new 0x0d dev 7 reg 0 old 0xae new 0xae dev 8 reg 2 old 0x07 new 0x04 dev 9 reg 13 old 0xfd new 0xfd dev 12 reg 0 old 0xae new 0xa9 cs423x1 <CS4237> rev 0xffffffff io 0x0530 intr 5 id 0 config file: controller pnp0 # this is required for PnP support controller snd0 device pcm0 that should about cover it for interesting info... I'm really happy now... -- John-Mark Gurney Modem/FAX: +1 541 683 6954 Cu Networking Live in Peace, destroy Micro$oft, support free software, run FreeBSD
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19970815044528.39513>