Date: Mon, 1 Apr 2002 18:14:42 -0800 (PST) From: Shizuka Kudo <shizukakudo_99@yahoo.com> To: Miguel Mendez <flynn@energyhq.homeip.net> Cc: freebsd-current@freebsd.org Subject: Re: Card has no functions Message-ID: <20020402021442.82984.qmail@web11404.mail.yahoo.com> In-Reply-To: <20020401212850.A69723@energyhq.homeip.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--0-566355663-1017713682=:82885 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline --- Miguel Mendez <flynn@energyhq.homeip.net> wrote: > > Hi there, > > > I'm having problem with the TI cardbus bridge to > > recognize PCCARD in "NEWCARD" kernel. I have a > desktop > > with TI PCI1250 adaptor and an IBM Thinkpad with > TI > > 1450. Both recognize PC Cards in "GENERIC" kernel, > but > > get "Card has no functions" in NEWCARD. I checked > the > > maillist and found no answer. The same kernel ran > fine > > in a Toshiba Portege with ToPIC100 cardbus bridge. > Is > > this something unique to TI chips? Any suggestion > I > > should try? > > My Thinkpad 310 is running -CURRENT as of the 29th > of March. I normally > use a CARDBUS nic, but I've just inserted a PCCARD > nic on the second > slot and it's recognized as ed0. My hardware has a > TI1131 PCI-CardBus > Bridge. > > It seems to work here, when did you last cvsup your > src? > > Cheers, Hi Miguel, I have an IBM Thinkpad 600X with latest BIOS from their web site. CURRENT was updated 31 Mar. I also had no problem with CARDBUS (a realtek 3190B). I tried 3com CCFEM556B (a combo card), Xircom CreditCard Ethernet 10/100, Orinoco Silver, all showed same error no matter the cards were inserted before power on or after boot up. Attached is the dmesg from my desktop (ASUS CUSL2 with PIII 750MHz) if this may help. Cheers, __________________________________________________ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://http://taxes.yahoo.com/ --0-566355663-1017713682=:82885 Content-Type: text/plain; name="dmesg.txt" Content-Description: dmesg.txt Content-Disposition: inline; filename="dmesg.txt" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #20020317: Sun Mar 17 23:51:21 HKT 2002 root@shizuka.aliens.homeip.net:/usr/obj/usr/src/sys/SHIZUKA Preloaded elf kernel "/boot/kernel/kernel" at 0xc048b000. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 757461721 Hz CPU: Pentium III/Pentium III Xeon/Celeron (757.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268349440 (262060K bytes) avail memory = 256212992 (250208K bytes) Pentium Pro MTRR support enabled Using $PIR table, 10 entries at 0xc00f1360 acpi0: <ASUS CUSL2 > on motherboard acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 3, max = 3, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 1 ACPI timer looks GOOD min = 3, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 pccbb0: <TI1225 PCI-CardBus Bridge> irq 9 at device 10.0 on pci2 pccbb0: PCI Memory allocated: ed000000 cardbus0: <CardBus bus> on pccbb0 pccard0: <16-bit PCCard bus> on pccbb0 pccbb1: <TI1225 PCI-CardBus Bridge> irq 9 at device 10.1 on pci2 pccbb1: PCI Memory allocated: ed001000 cardbus1: <CardBus bus> on pccbb1 pccard1: <16-bit PCCard bus> on pccbb1 pci2: <serial bus, FireWire> at device 12.0 (no driver attached) pcm0: <Creative EMU10K1> port 0xd800-0xd81f irq 5 at device 14.0 on pci2 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ugen0: OmniVision OV511+ Camera, rev 1.00/1.00, addr 2 ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus general purpose I/O> on smbus0 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub2: 4 ports with 4 removable, self powered fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 npx0: <math processor> on motherboard npx0: INT 16 interface pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% pccbb0: card inserted: event=0x00000000, state=30000410 pccard0: chip_socket_enable pccbb_pcic_socket_enable: pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15] pccard0: read_cis pccard0: check_cis_quirks pccard0: Card has no functions! pccbb0: PC Card card activation failed pccbb1: card inserted: event=0x00000000, state=30001810 pccard1: chip_socket_enable pccbb_pcic_socket_enable: pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb1: pccbb_power: CARD_VCC_XV and CARD_VPP_VCC [12] pccbb1: ready never happened, status = 0c pccard1: read_cis pccard1: check_cis_quirks pccard1: Card has no functions! pccbb1: PC Card card activation failed ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA100 ad1: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-slave UDMA100 acd0: CD-RW <SONY CD-RW CRX120E> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a pccbb_pcic_socket_disable pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: card inserted: event=0x00000000, state=30000410 pccard0: chip_socket_enable pccbb_pcic_socket_enable: pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44] pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15] pccard0: read_cis cis mem map cee96000 pccard0: CIS tuple chain: CISTPL_NONE 00 unhandled CISTPL 3 03 00 CISTPL_NONE 00 CISTPL_END ff cis mem map cee96000 CISTPL_LINKTARGET expected, code 00 observed pccard0: check_cis_quirks pccard0: Card has no functions! pccbb0: PC Card card activation failed --0-566355663-1017713682=:82885-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020402021442.82984.qmail>