Date: Wed, 4 Jul 2001 15:45:12 +0100 From: James Greenhalgh <james-list@ntlworld.com> To: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> Cc: freebsd-stable@freebsd.org, freebsd-questions@freebsd.org Subject: Re: HELP! Server crashes since last cvsupdate! Message-ID: <20010704154512.094f0fbd.james-list@ntlworld.com> In-Reply-To: <Pine.BSF.4.33.0107041043100.93015-100000@klima.physik.uni-mainz.de> References: <20010704041755.583fb511.james-list@ntlworld.com> <Pine.BSF.4.33.0107041043100.93015-100000@klima.physik.uni-mainz.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Yes - mine seems to be behaving now with SMP support disabled. Fortunately I've got a full system disk clone from a few weeks ago so I'll downgrade when I get the opportunity to do so - so I guess the current 4.x stable should be considered to be non-stable on (some?) SMP machines. james On Wed, 4 Jul 2001 10:46:29 +0200 (CEST) "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> wrote: > > As described below, I suspected the Linuxator (due the linproc changes > last week). But eleminating all did not solve the problem. > > I switched all systems yesterday morning to UP kernel - and they > are still up right now. A third SMP machine is up since 17 days with > the old sources, also SCSI and a lot of similar configs like the other both > crashing SMP systems. > > Has anyone tried Tor's patch? I can not elaborate this before weekend, > because all SMP systems are heavily in use until Friday. > > > :>On Mon, 2 Jul 2001 10:54:43 +0200 (CEST) > :>"Hartmann, O." <ohartman@klima.physik.uni-mainz.de> wrote: > :> > :>> Hello. > :>> > :>> Since our last update Friday, 29th June, both SMP machines run > :>> into a "stuck" condition after a while. This happened now two times > :>> and I do not know what happens. > :>> > :>> The machines do not respond on console inputs, keyboards seem > :>> to be dead. Over network, accessing the machines via ssh or telnet > :>> results in a short message, then they hung after typing passowrd (ssh) or > :>> trying to connect (telnet). Both machines have NFS running. > :>> A third server attached to the same network node (behind a switch), an UP > :>> machine, is still alive (acts also as a NFS server) and fully accessible. > :>> > :>> What's up with FreeBSD 4.2-STABLE? Has something important been changed in > :>networking?Oliver > :> > :>Perhaps it's something else. My desktop machine (rebuilt yesterday and again > :>tonight) is starting to hang in general use almost randomly. It was solid as > :>a rock before this point, running a 4.3-stable from early last month. I had > :>thought it was linux emu support or DRI causing it, but having eliminated both > :>of those it proceeded to do it again in console mode. My nonupgraded remote > :>server, similar hardware config but left at a month old setup is still happy. > :>Again an SMP machine, here's the dmesg: > :> > :>------- > :> > :>Copyright (c) 1992-2001 The FreeBSD Project. > :>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > :> The Regents of the University of California. All rights reserved. > :>FreeBSD 4.3-STABLE #0: Wed Jul 4 03:16:56 BST 2001 > :> root@eclipse.bloodflowers.org:/usr/obj/usr/src/sys/ECLIPSE > :>Timecounter "i8254" frequency 1193182 Hz > :>CPU: Pentium II/Pentium II Xeon/Celeron (397.95-MHz 686-class CPU) > :> Origin = "GenuineIntel" Id = 0x652 Stepping = 2 > :> > :>Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> > :>real memory = 268369920 (262080K bytes) > :>config> di pcic0 > :>No such device: pcic0 > :>Invalid command or syntax. Type `?' for help. > :>config> di sn0 > :>No such device: sn0 > :>Invalid command or syntax. Type `?' for help. > :>config> di lnc0 > :>No such device: lnc0 > :>Invalid command or syntax. Type `?' for help. > :>config> di ie0 > :>No such device: ie0 > :>Invalid command or syntax. Type `?' for help. > :>config> di fe0 > :>No such device: fe0 > :>Invalid command or syntax. Type `?' for help. > :>config> di cs0 > :>No such device: cs0 > :>Invalid command or syntax. Type `?' for help. > :>config> di bt0 > :>No such device: bt0 > :>Invalid command or syntax. Type `?' for help. > :>config> di aic0 > :>No such device: aic0 > :>Invalid command or syntax. Type `?' for help. > :>config> di aha0 > :>No such device: aha0 > :>Invalid command or syntax. Type `?' for help. > :>config> di adv0 > :>No such device: adv0 > :>Invalid command or syntax. Type `?' for help. > :>config> en ed0 > :>config> po ed0 0x300 > :>config> ir ed0 10 > :>config> iom ed0 0xd8000 > :>config> f ed0 0 > :>config> q > :>avail memory = 257310720 (251280K bytes) > :>Programming 24 pins in IOAPIC #0 > :>IOAPIC #0 intpin 2 -> irq 0 > :>IOAPIC #0 intpin 16 -> irq 11 > :>IOAPIC #0 intpin 17 -> irq 3 > :>IOAPIC #0 intpin 18 -> irq 4 > :>IOAPIC #0 intpin 19 -> irq 7 > :>FreeBSD/SMP: Multiprocessor motherboard > :> cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 > :> cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 > :> io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 > :>Preloaded elf kernel "kernel" at 0xc03ec000. > :>Preloaded userconfig_script "/boot/kernel.conf" at 0xc03ec09c. > :>Preloaded elf module "agp.ko" at 0xc03ec0ec. > :>ccd0-3: Concatenated disk drivers > :>VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc036c977 (1000117) > :>VESA: 3dfx Interactive, Inc. > :>Pentium Pro MTRR support enabled > :>md0: Malloc disk > :>npx0: <math processor> on motherboard > :>npx0: INT 16 interface > :>pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard > :>pci0: <PCI bus> on pcib0 > :>agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at > :>device 0.0 on pci0 > :>pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 > :>pci1: <PCI bus> on pcib1 > :>pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq 11 > :>isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 > :>isa0: <ISA bus> on isab0 > :>atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on > :>pci0 > :>ata0: at 0x1f0 irq 14 on atapci0 > :>ata1: at 0x170 irq 15 on atapci0 > :>uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 7 at > :>device 7.2 on pci0 > :>usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > :>usb0: USB revision 1.0 > :>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > :>uhub0: 2 ports with 2 removable, self powered > :>intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 > :>at device 7.3 on pci0 > :>intpm0: I/O mapped 5000 > :>intpm0: intr IRQ 9 enabled revision 0 > :>smbus0: <System Management Bus> on intsmb0 > :>intpm0: PM I/O mapped 4000 > :>amr0: <AMI MegaRAID> port 0xd400-0xd47f irq 3 at device 9.0 on pci0 > :>amr0: <Series 428> Firmware C.80, BIOS 1.51, 4MB RAM > :>fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd800-0xd83f mem > :>0xed000000-0xed01ffff,0xed023000-0xed023fff irq 4 at device 10.0 on pci0 > :>fxp0: Ethernet address 00:02:b3:2e:57:18 > :>inphy0: <i82555 10/100 media interface> on miibus0 > :>inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > :>bktr0: <BrookTree 878> mem 0xed020000-0xed020fff irq 7 at device 11.0 on pci0 > :>iicbb0: <I2C generic bit-banging driver> on bti2c0 > :>iicbus0: <Philips I2C bus> on iicbb0 master-only > :>smbus1: <System Management Bus> on bti2c0 > :>bktr0: Hauppauge Model 44354 A321 > :>bktr0: Detected a MSP3415D-B3 at 0x80 > :>bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, > :>remote control. > :>pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 11.1 irq 7 > :>ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xdc00-0xdcff mem > :>0xed022000-0xed022fff irq 11 at device 12.0 on pci0 > :>aic7895C: Wide Channel A, SCSI Id=7, 32/255 SCBs > :>ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xe000-0xe0ff mem > :>0xed024000-0xed024fff irq 11 at device 12.1 on pci0 > :>ahc1: Using left over BIOS settings > :>aic7895C: Wide Channel B, SCSI Id=7, 32/255 SCBs > :>isa0: too many dependant configs (8) > :>isa0: unexpected small tag 14 > :>orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xcd000-0xd17ff on isa0 > :>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > :>fdc0: FIFO enabled, 8 bytes threshold > :>fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > :>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > :>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > :>kbd0 at atkbd0 > :>psm0: <PS/2 Mouse> irq 12 on atkbdc0 > :>psm0: model IntelliMouse Explorer, device ID 4 > :>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > :>sc0: <System console> at flags 0x100 on isa0 > :>sc0: VGA <16 virtual consoles, flags=0x300> > :>ppc0: parallel port not found. > :>ed0 at port 0x300-0x31f iomem 0xd8000 irq 10 drq 0 on isa0 > :>ed0: address 00:c0:f0:1c:11:70, type NE2000 (16 bit) > :>pca0 at port 0x40 on isa0 > :>sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 > :>drq 1,5 on isa0 > :>pcm0: <SB16 DSP 4.16> on sbc0 > :>joy0: <Generic PnP Joystick> at port 0x200-0x207 on isa0 > :>APIC_IO: Testing 8254 interrupt delivery > :>APIC_IO: routing 8254 via IOAPIC #0 intpin 2 > :>IP packet filtering initialized, divert enabled, rule-based forwarding > :>enabled, default to accept, logging limited to 10 packets/entry by default > :>SMP: AP CPU #1 Launched! > :>ad0: 2445MB <QUANTUM SIROCCO2550A> [4969/16/63] at ata0-master WDMA2 > :>ad1: 6149MB <ST36450A> [13328/15/63] at ata0-slave WDMA2 > :>acd0: CD-RW <CR-4802TE> at ata1-master using PIO3 > :>Waiting 15 seconds for SCSI devices to settle > :>amrd0: <MegaRAID logical drive> on amr0 > :>amrd0: 255MB (522240 sectors) RAID 0 (optimal) > :>amrd1: <MegaRAID logical drive> on amr0 > :>amrd1: 8526MB (17461248 sectors) RAID 5 (optimal) > :>Mounting root from ufs:/dev/da0s1a > :>da0 at ahc0 bus 0 target 0 lun 0 > :>da0: <FUJITSU MAE3091LP 0112> Fixed Direct Access SCSI-2 device > :>da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing > :>Enabled > :>da0: 8704MB (17826240 512 byte sectors: 255H 63S/T 1109C) > :>WARNING: / was not properly dismounted > :>(then warnings and normal startup, of course...) > :> > :>-- > :> > :>find great crazy-mad out-of-head experience from japan. > :> > > -- > MfG > O. Hartmann > > ohartman@klima.physik.uni-mainz.de > ---------------------------------------------------------------- > IT-Administration des Institut fuer Physik der Atmosphaere (IPA) > ---------------------------------------------------------------- > Johannes Gutenberg Universitaet Mainz > Becherweg 21 > 55099 Mainz > > Tel: +496131/3924662 (Maschinenraum) > Tel: +496131/3924144 > FAX: +496131/3923532 > -- US sellers - PLEASE do not put artificially high values on green customs slips for insurance purposes, as the UK customs can choose to tax at 17.5% based on that amount!! No more $70 items valued at $300, please!! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010704154512.094f0fbd.james-list>