Date: Tue, 24 Mar 2009 17:25:27 +0300 From: Vladimir Ermakov <samflanker@gmail.com> To: pluknet <pluknet@gmail.com> Cc: freebsd-hackers@freebsd.org Subject: Re: [problem] aac0 does not respond Message-ID: <49C8ED57.9080807@gmail.com> In-Reply-To: <a31046fc0903240622x433b8c1dp8418ecaa6376e35b@mail.gmail.com> References: <49C8AD9B.7000500@gmail.com> <a31046fc0903240622x433b8c1dp8418ecaa6376e35b@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
pluknet wrote:
> 2009/3/24 Vladimir Ermakov <samflanker@gmail.com>:
>
>> Hello, All
>>
>> Describe my problem:
>> have volume RAID-10 (SAS-HDD x 6) on Adaptec RAID 5805
>>
>
> You can check status of aac controller with arcconf utility
>
> and post results there..
>
>
OK
i am try enter command:
# arcconf task start 1 device 0 4 verify
after
viewed logs (note, from kernel config: options AAC_DEBUG=2)
# less /var/log/messages
Mar 24 14:43:24 sys3 kernel: aac0: JobProgress (97) - running (9500000,
10000000)
Mar 24 14:43:24 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:44:10 sys3 kernel: aac0: JobProgress (98) - running (9600000,
10000000)
Mar 24 14:44:10 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:44:55 sys3 kernel: aac0: JobProgress (99) - running (9700000,
10000000)
Mar 24 14:44:55 sys3 kernel:
Mar 24 14:44:55 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:45:41 sys3 kernel: aac0: JobProgress (100) - running (9800000,
10000000)
Mar 24 14:45:41 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:46:28 sys3 kernel: aac0: JobProgress (101) - running (9900000,
10000000)
Mar 24 14:46:28 sys3 kernel: aac0: (ScsiVerify) handle 4
Mar 24 14:47:15 sys3 kernel: aac0: EventNotify(0)
Mar 24 14:47:15 sys3 kernel: aac0: (23)
Mar 24 14:47:15 sys3 kernel: aac0: JobProgress (102) - success (9900000,
10000000)
Mar 24 14:47:15 sys3 kernel: aac0: (ScsiVerify) handle 4
# arcconf getlogs 1 EVENT
***
<event Date="1237902930" eventType="FSA_EM_EXPANDED_EVENT"
eventCode="0x10000000" groupType="FSA_EXE_SCSI_GROUP" groupCode="2"
priority="3" subType="FSA_EXE_SCSI_SENSE_DATA" subTypeCode="12" cdb="2f
00 0b 64 d0 00 00 02 00 00 00 00" data="70 00 03 00 00 00 00 00 00 00 00
00 11 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00" lun="0"
controllerID="0" channelID="0" deviceID="4"/>
<event Date="1237902930" eventType="FSA_EM_EXPANDED_EVENT"
eventCode="0x10000000" groupType="FSA_EXE_SCSI_GROUP" groupCode="2"
priority="3" subType="FSA_EXE_SCSI_SENSE_DATA" subTypeCode="12" cdb="2f
00 0b 64 d0 00 00 02 00 00 00 00" data="70 00 03 00 00 00 00 00 00 00 00
00 11 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00" lun="0"
controllerID="0" channelID="0" deviceID="4"/>
<event Date="1237902930" eventType="FSA_EM_EXPANDED_EVENT"
eventCode="0x10000000" groupType="FSA_EXE_SCSI_GROUP" groupCode="2"
priority="3" subType="FSA_EXE_SCSI_MEDIUM_ERROR" subTypeCode="5"
bbrPossibleType="FSA_EXE_SCSI_BBR_POSSIBLE" bbrPossibleCode="2"
lbaStart="191156224" lbaEnd="191156735" lun="0" controllerID="0"
channelID="0" deviceID="4"/>
<event Date="1237902930" eventType="FSA_EM_EXPANDED_EVENT"
eventCode="0x
16 00 00 00 00 00 04 00 00 00" data="70 00 05 00 00 00 00 00 00 00 00 00
24 00 0
# arcconf task start 1 device 0 4 verify_fix
Controllers found: 1
Verify with fix of a Hard drive is a long process.
Are you sure you want to continue?
Press y, then ENTER to continue or press ENTER to abort: y
Verifying with fix Channel 0, Device 4.
Command completed successfully.
====================================================
after i am lost my remote system
thx
/Vladimir Ermakov
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49C8ED57.9080807>