Date: Fri, 29 Sep 1995 00:07:01 -0500 (CDT) From: Kent Hamilton <kenth@HNS.St-Louis.Mo.US> To: freebsd-current@freebsd.org Subject: ATAPI CDROM problem. Message-ID: <199509290507.AAA06262@gwydion.HNS.St-Louis.Mo.US>
next in thread | raw e-mail | index | archive | help
I just joined this list and moved to 2.2-current this weekend. The main reason I did so was because I had a desperate need to get the ATAPI cdrom stuff working. I reconfigured my kernal to use it and rebuilt (make bootstrap, make world, etc, etc) and when I boot on it, I get to the wcd0 and get a panic. The wording on the error is "drive attached twice". And it cycles through the re-boot. This is on a NEC P100 PCI with an embedded two channel [E]IDE controller, with the CDROM as the only device on the second channel. Below is the output of 'dmesg' and the relevent bits from my config file. Anyone got this working care to offer suggestions? I get this compile warning in atapi.c: ../../i386/isa/atapi.c: In function 'atapi_attach': ../../i386/isa/atapi.c:263: warning: nested extern declaration of 'wcdattach' I haven't had time to look at the code yet. Our NT server at work died on Monday.... ---- Config file bits ---- options ATAPI #Enable ATAPI support for IDE bus devices (CDROM) controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 device wcd0 I've also tried both of these: Doesn't panic on this but also doesn't find the CD. options ATAPI #Enable ATAPI support for IDE bus devices (CDROM) controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 device wcd0 Still panics on this one. options ATAPI #Enable ATAPI support for IDE bus devices (CDROM) controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 device wcd0 at wdc1 ---- dmesg output ---- Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 10 maddr 0xcc000 msize 16384 on isa ed0: address 00:00:c0:aa:ec:58, type WD8013EPC (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 not found at 0x3e8 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x63 irq 12 on motherboard fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <Maxtor 71626 AP> wd0: 1554MB (3183264 sectors), 3158 cyls, 16 heads, 63 S/T, 512 B/S wdc1: disabled, not probed. bt0: Bt54xC/ 0-ISA(24bit) bus bt0: This driver is designed for using 32 bit addressing bt0: mode firmware and EISA/PCI/VLB bus architectures bt0: Bounce-buffering will be used (and is necessary) bt0: if you have more than 16MBytes memory. bt0: reading board settings, dma=5, int=11 bt0: version 4.21, sync, parity, 32 mbxs, 32 ccbs bt0: targ 1 sync rate=10.00MB/s(100ns), offset=15 bt0: Using Strict Round robin scheme bt0 at 0x230 irq 11 drq 5 on isa bt0 waiting for scsi devices to settle (bt0:0:0): "MICROP 1588-15MB1057403 HSP4" type 0 fixed SCSI 1 sd0(bt0:0:0): Direct-Access 636MB (1304052 512 byte sectors) sd0(bt0:0:0): with 1632 cyls, 15 heads, and an average 53 sectors/track (bt0:1:0): "SEAGATE ST42100 8224" type 0 fixed SCSI 2 sd1(bt0:1:0): Direct-Access 1812MB (3711990 512 byte sectors) sd1(bt0:1:0): with 2574 cyls, 15 heads, and an average 96 sectors/track npx0 on motherboard npx0: INT 16 interface Probing for devices on the PCI bus: chip0 <Intel 82437 (Triton)> rev 1 on pci0:0 chip1 <Intel 82371 (Triton)> rev 2 on pci0:7 vga0 <VGA-compatible display device> rev 2 on pci0:8 -- Kent Hamilton Work: KHamilton@Hunter.COM URL: http://www.icon-stl.net/~khamilto Play: KentH@HNS.St-Louis.Mo.US controller ncr0 controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr controller bt0 at isa? port 0x230 bio irq ? vector btintr controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr controller ahc1 at isa? bio irq ? vector ahcintr controller ahb0 at isa? bio irq ? vector ahbintr controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller aic0 at isa? port 0x340 bio irq 11 vector aicintr controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller scbus0 device sd0 device st0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr #controller matcd0 at isa? port ? bio device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty device lpt2 at isa? port? tty device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr #device mse0 at isa? port 0x23c tty irq 5 vector mseintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 #device cx0 at isa? port 0x240 net irq 15 drq 7 vector cxintr device ed0 at isa? port 0x300 net irq 10 iomem 0xcc000 vector edintr #device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr #device eg0 at isa? port 0x310 net irq 5 vector egintr #device el0 at isa? port 0x300 net irq 9 vector elintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device fe0 at isa? port 0x240 net irq ? vector feintr #device fea0 at isa? net irq ? vector feaintr #device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr #device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr # controller snd0 #device pas0 at isa? port 0x388 irq 10 drq 6 vector pasintr #device pas0 at isa? port 0x388 irq 9 drq 6 vector pasintr device sb0 at isa? port 0x220 irq 9 conflicts drq 1 vector sbintr #device sb0 at isa? port 0x220 irq 7 conflicts drq 1 vector sbintr #device sbxvi0 at isa? drq 5 device sbxvi0 at isa? drq 0 device sbxvi0 at isa? drq 1 device sbmidi0 at isa? port 0x330 #device gus0 at isa? port 0x220 irq 11 drq 1 vector gusintr #device gusxvi0 at isa? port 0x530 irq 7 conflicts drq 3 vector adintr #device gusmax0 at isa? port 0x32c device mss0 at isa? port 0x380 irq 9 drq 1 vector adintr #device mss0 at isa? port 0x530 irq 10 drq 1 vector adintr device opl0 at isa? port 0x220 conflicts device mpu0 at isa? port 0x330 irq 5 drq 0 #device mpu0 at isa? port 0x330 irq 6 drq 0 #device uart0 at isa? port 0x330 irq 5 vector "m6850intr" # Not controlled by `snd' #device pca0 at isa? port IO_TIMER1 tty # pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # My "pseudo-devices" changes -- SKH pseudo-device vn #Vnode driver (turns a file into a device) #pseudo-device fddi #Generic FDDI #pseudo-device sppp #Generic Synchronous PPP pseudo-device bpfilter 4 #Berkeley packet filter #pseudo-device speaker #Play IBM BASIC-style noises out your speaker pseudo-device snp 4 #Snoop device - to look at pty/vty/etc.. # These are non-optional for ISDN #pseudo-device isdn #pseudo-device ii 4 #pseudo-device ity 4 #pseudo-device itel 2 #pseudo-device ispy 1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199509290507.AAA06262>