Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 13 May 1996 00:30:05 -0700
From:      Scanner <scanner@apricot.com>
To:        freebsd-questions@freebsd.org
Subject:   Problem with SMC Ethernet card
Message-ID:  <199605130730.AAA01708@ryoohki.apricot.com>

next in thread | raw e-mail | index | archive | help
Hello,

I am installing FreeBSD-2.1.0 (off of the 2.1 cdrom) on to a DX4/100
on a ASUS PCI/I-486SP3G motherboard.

The only items installed on this MB are the ethernet card and a rather
generic VGA card. The machine has 8mb of memory installed (two 4mb
simms in slots 1&2.)

The ethernet card is set with its jumpers so that it uses IRQ 3 and
RAM window at D000.

There is a scsi drive in this system and one 3.5" 1.44mb floppy drive.
I can partition and label the disk just fine. I can apparently 
configure the ethernet adaptor just fine. I get the messages on 
the virtual console:

> DEBUG: Init routine called for network device ed0.
> ed0: device timeout
> add net deafult gateway: 206.14.224.1
> DEBUG: Network initialized succesfully.
> ed0: device timeout
> ... repeats ...

Eventually it gives up not being able to mount the NFS partition.
If I try to ping the machine I get no response.  The ethernet
card's activity lights do show that the card is seeing the general
traffic on the network.

Not being that familiar with this particular configuration of Intel
hardware is there some interupt or something that is swallowing up
the ethernet card's responses? The kernel definitely probes and
recognizes the card, and apparently claims it was able to configure
it correctly. If I do a "ifconfig ed0" on vty4 it comes back
with the correct information.

I am assuming that the data path to configure the card and query
its state is different than the data path used when actually
transferring data between the card and the system.

I have done network nfs installs of freebsd before, but they were on
3c509's.

I will continue poking at this machine and such. Any help would
be appreciated.

--Scanner	(scanner@apricot.com)





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199605130730.AAA01708>