Date: Wed, 17 May 2006 07:01:46 +1000 From: fbsd <fbsd@aanet.com.au> To: Ted Mittelstaedt <tedm@toybox.placo.com> Cc: freebsd-questions@freebsd.org Subject: Re: Help to find cause of recurring crash Message-ID: <446A3DBA.9060604@aanet.com.au> In-Reply-To: <LOBBIFDAGNMAMLGJJCKNCEPGFDAA.tedm@toybox.placo.com> References: <LOBBIFDAGNMAMLGJJCKNCEPGFDAA.tedm@toybox.placo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Ted Mittelstaedt wrote: > Ron, > > Is this the HP Vectra server that has the onboard Adaptec > SCSI controller, and are you running SCSI drives on it? > > If so, there's another guy that has one of these servers > and was complaining about bugs in the adaptec driver sometime > last year causing a similar issue. I told him to send-pr it > but I don't think anything came of that. > > I would say you have a 80% chance it's what they call: > "non-compliant hardware" It is well known that HP has a microcode > license from Adaptec, they and Compaq have modified Adaptec's microcode > before. It is really annoying when they do it and put their modded > microcode into Adaptec's cards - I have had before on my desk, > 2 identical Adaptec SCSI cards, that when both placed in a Compaq > desktop will boot up with identical firmware version numbers with > one exception - one of them has a trailing "S" on the firmware version > number - and both work exactly the same in the Compaq, yet take > the Adaptec card that was purchased from retail and put it in > another system and it works fine, but take the adaptec card > that was purchased from Compaq/HP spares and it will not work in > any other system. > > It's enough to piss off an idiot. > > Ted > > >> -----Original Message----- >> From: owner-freebsd-questions@freebsd.org >> [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of fbsd >> Sent: Tuesday, May 16, 2006 4:09 AM >> To: freebsd-questions@freebsd.org >> Subject: Help to find cause of recurring crash >> >> >> Hello All, >> >> I'm running a home email server and twice in the last week it has >> rebooted itself and been unable to restart due to corruption of the >> filesystem. I found the following in /var/log/messages >> >> May 16 17:46:07 hpvectra syslogd: kernel boot file is >> /boot/kernel/kernel >> May 16 17:46:07 hpvectra kernel: >> May 16 17:46:07 hpvectra kernel: >> May 16 17:46:07 hpvectra kernel: Fatal trap 12: page fault while in >> kernel mode >> May 16 17:46:07 hpvectra kernel: fault virtual address = 0x1c >> May 16 17:46:07 hpvectra kernel: fault code = supervisor write, >> page not present >> May 16 17:46:07 hpvectra kernel: instruction pointer = >> 0x20:0xc062c5e8 >> May 16 17:46:07 hpvectra kernel: stack pointer = >> 0x28:0xe5079c50 >> May 16 17:46:07 hpvectra kernel: frame pointer = >> 0x28:0xe5079c64 >> May 16 17:46:07 hpvectra kernel: code segment = base 0x0, limit >> 0xfffff, type 0x1b >> May 16 17:46:07 hpvectra kernel: = DPL 0, pres 1, def32 1, gran 1 >> May 16 17:46:07 hpvectra kernel: processor eflags = interrupt >> enabled, resume, IOPL = 0 >> May 16 17:46:07 hpvectra kernel: current process = 52 (vnlru) >> May 16 17:46:07 hpvectra kernel: trap number = 12 >> May 16 17:46:07 hpvectra kernel: panic: page fault >> May 16 17:46:07 hpvectra kernel: Uptime: 5d7h4m50s >> May 16 17:46:07 hpvectra kernel: Dumping 1023 MB (2 chunks) >> May 16 17:46:07 hpvectra kernel: chunk 0: 1MB (159 pages) ... ok >> May 16 17:46:07 hpvectra kernel: chunk 1: 1023MB (261872 pages) >> 1007 991 >> 975 959 943 927 911 895 879 863 847 831 815 799 783 767 751 735 719 703 >> 687 671 655 639 623 607 591 575 559 543 527 511 495 479 463 447 431 415 >> 399 383 367 351 335 319 303 287 271 255 239 223 207 191 175 159 143 127 >> 111 95 79 63 47 31 15 ... ok >> May 16 17:46:07 hpvectra kernel: >> May 16 17:46:07 hpvectra kernel: Dump complete >> May 16 17:46:07 hpvectra kernel: Automatic reboot in 15 seconds - press >> a key on the console to abort >> May 16 17:46:07 hpvectra kernel: Rebooting... >> >> When I turn on the monitor I see that the reboot has not been >> successful >> due to "/ was not properly dismounted" and it is asking for fsck to be >> run manually. When I do that everything is fine again. >> >> Can anybody help me find the cause of the crash? What extra information >> is needed and how do I find that information? I'm relatively >> new to FreeBSD. >> >> Thanks in advance, >> >> Ron >> >> >> >> PS Other information that may be of help: >> >> I'm running 6.0 release, >> X is not running >> no users are logged in, cursor sits at the login screen >> running programs include, fetchmail daemon, dovecot, procmail, >> clamassassin, clamd, >> only strange behaviour noted is the following error messages >> >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk49H9AXd016830: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk49H9Ahr016830: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk49H9Amm016830: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk49H9A5E016830: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk49H9AHZ016830: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk49Hlokm016830: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk49HrgQC016830: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk49HrgiD016830: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk45HuHZj028031: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk45H9Q8H028031: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk45H9QIF028031: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk45H9Q2k028031: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk45H9Q3g028031: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk45H9Q8I028031: No such file or directory >> May 11 03:02:51 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk44HetDK015554: No such file or directory >> May 11 03:02:52 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk44HkTLo015554: No such file or directory >> May 11 03:02:53 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk44HuiTU015554: No such file or directory >> May 11 03:02:56 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk44IA0GF016123: No such file or directory >> May 11 03:02:56 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk44Ho0tW015927: No such file or directory >> May 11 03:02:56 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk44I00DB016025: No such file or directory >> May 11 03:02:56 hpvectra sendmail[5729]: NOQUEUE: SYSERR(root): readqf: >> cannot open ./dfk44Ht0gL015964: No such file or directory >> May 11 03:06:08 hpvectra sendmail[5909]: k49H9AXd016830: SYSERR(root): >> readqf: cannot open ./dfk49H9AXd016830: No such file or directory >> May 11 03:06:12 hpvectra sendmail[5909]: k49H9Ahr016830: SYSERR(root): >> readqf: cannot open ./dfk49H9Ahr016830: No such file or directory >> May 11 03:06:12 hpvectra sendmail[5909]: k49H9Amm016830: SYSERR(root): >> readqf: cannot open ./dfk49H9Amm016830: No such file or directory >> May 11 03:06:12 hpvectra sendmail[5909]: k49H9A5E016830: SYSERR(root): >> readqf: cannot open ./dfk49H9A5E016830: No such file or directory >> May 11 03:06:12 hpvectra sendmail[5909]: k49H9AHZ016830: SYSERR(root): >> readqf: cannot open ./dfk49H9AHZ016830: No such file or directory >> May 11 03:06:20 hpvectra sendmail[5909]: k49Hlokm016830: SYSERR(root): >> readqf: cannot open ./dfk49Hlokm016830: No such file or directory >> May 11 03:06:31 hpvectra sendmail[5909]: k49HrgQC016830: SYSERR(root): >> readqf: cannot open ./dfk49HrgQC016830: No such file or directory >> May 11 03:06:32 hpvectra sendmail[5909]: k49HrgiD016830: SYSERR(root): >> readqf: cannot open ./dfk49HrgiD016830: No such file or directory >> May 11 03:06:33 hpvectra sendmail[5909]: k45HuHZj028031: SYSERR(root): >> readqf: cannot open ./dfk45HuHZj028031: No such file or directory >> May 11 03:06:33 hpvectra sendmail[5909]: k45H9Q8H028031: SYSERR(root): >> readqf: cannot open ./dfk45H9Q8H028031: No such file or directory >> May 11 03:06:33 hpvectra sendmail[5909]: k45H9QIF028031: SYSERR(root): >> readqf: cannot open ./dfk45H9QIF028031: No such file or directory >> May 11 03:06:33 hpvectra sendmail[5909]: k45H9Q2k028031: SYSERR(root): >> readqf: cannot open ./dfk45H9Q2k028031: No such file or directory >> May 11 03:06:33 hpvectra sendmail[5909]: k45H9Q3g028031: SYSERR(root): >> readqf: cannot open ./dfk45H9Q3g028031: No such file or directory >> May 11 03:06:33 hpvectra sendmail[5909]: k45H9Q8I028031: SYSERR(root): >> readqf: cannot open ./dfk45H9Q8I028031: No such file or directory >> May 11 03:06:34 hpvectra sendmail[5909]: k44HetDK015554: SYSERR(root): >> readqf: cannot open ./dfk44HetDK015554: No such file or directory >> May 11 03:07:52 hpvectra sendmail[5909]: k44HkTLo015554: SYSERR(root): >> readqf: cannot open ./dfk44HkTLo015554: No such file or directory >> May 11 03:08:53 hpvectra sendmail[5909]: k44HuiTU015554: SYSERR(root): >> readqf: cannot open ./dfk44HuiTU015554: No such file or directory >> May 11 03:12:12 hpvectra sendmail[5909]: k44IA0GF016123: SYSERR(root): >> readqf: cannot open ./dfk44IA0GF016123: No such file or directory >> May 11 03:12:12 hpvectra sendmail[5909]: k44Ho0tW015927: SYSERR(root): >> readqf: cannot open ./dfk44Ho0tW015927: No such file or directory >> May 11 03:12:12 hpvectra sendmail[5909]: k44I00DB016025: SYSERR(root): >> readqf: cannot open ./dfk44I00DB016025: No such file or directory >> >> however I have "sendmail_enable="NONE"" in /etc/rc.conf so sendmail >> shouldn't be working. >> >> >> _______________________________________________ >> freebsd-questions@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> To unsubscribe, send any mail to >> "freebsd-questions-unsubscribe@freebsd.org" >> >> -- >> No virus found in this incoming message. >> Checked by AVG Free Edition. >> Version: 7.1.392 / Virus Database: 268.5.6/340 - Release Date: 5/15/2006 >> >> > > > Hi Ted, Not sure about the Adaptec SCSI controller being onboard, but I'm not using SCSI disks. Thanks Ron
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?446A3DBA.9060604>