Date: Fri, 3 Sep 1999 16:47:20 -0500 (CDT) From: Mike Spengler <mks@networkcs.com> To: jgreco@ns.sol.net (Joe Greco) Cc: freebsd-atm@FreeBSD.ORG Subject: Re: VPI's other than zero? Message-ID: <199909032147.QAA56057@us.networkcs.com> In-Reply-To: <199909032132.QAA64211@aurora.sol.net> from Joe Greco at "Sep 3, 99 04:32:58 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Joe Greco said: > Greetings - > > Are VPI's other than zero supposed to work? > > I'm not quite sure what I've done wrong. > > kernel: > > options ATM_CORE #core ATM protocol family > options ATM_IP #IP over ATM support > options ATM_SIGPVC #SIGPVC signalling manager > device hfa0 #FORE PCA-200E ATM PCI > > rc.conf: > > atm_enable="YES" > atm_netif_hfa0="atm 1" # Network interfaces for physical interface. > atm_sigmgr_hfa0="sigpvc" # Signalling manager for physical interface. > atm_macaddr_hfa0="NO" # Override physical MAC address (or NO). > atm_pvcs="test" # Set to PVC list (or leave empty). > atm_pvc_test="hfa0 6 32 aal5 snap ip atm0 10.1.1.1" > atm_arps="" # Set to permanent ARP list (or leave > empty). > > But: > > # ifconfig atm0 > atm0: flags=43<UP,BROADCAST,RUNNING> mtu 9180 > inet 10.1.1.2 netmask 0xffffff00 broadcast 10.1.1.255 > ether 00:20:48:40:ce:3e > # atm show config > Intf Vendor Model Media Bus Serial No > hfa0 Fore PCA-200E OC-3c PCI 4247102 > MAC address = 00:20:48:40:ce:3e > Hardware version = 2.0.1 > Firmware version = 4.0.0 > # atm show interface > Interface Sigmgr State > hfa0 SIGPVC ACTIVE > ATM address = - > Network interfaces: atm0 > # atm show netif > Net Intf Phy Intf IP Address > atm0 hfa0 10.1.1.2 > # atm add PVC hfa0 0 33 AAL5 LLC/SNAP IP atm0 10.1.1.1 > # atm show VCC > Interface VPI VCI AAL Type Dir State Encaps Owner > hfa0 0 33 AAL5 PVC InOut ACTIVE LLC/SNAP IP > # atm delete PVC hfa0 0 33 > # atm add PVC hfa0 6 33 AAL5 LLC/SNAP IP atm0 10.1.1.1 > atm: Invalid VPI or VCI value > > "Huh??" > > Anyone know what I'm doing wrong? > FORE adapters (or more specifically, the microcode running on the adapter) only support VPI 0. -- Mike Spengler Network Computing Services, Inc. Email: mks@networkcs.com 1200 Washington Ave. So. Phone: +1 612 337 3557 Minneapolis MN 55415 FAX: +1 612 337 3400 (aka Minnesota Supercomputer Center) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-atm" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199909032147.QAA56057>