From owner-freebsd-hackers Mon Mar 3 05:17:19 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id FAA28710 for hackers-outgoing; Mon, 3 Mar 1997 05:17:19 -0800 (PST) Received: from agora.rdrop.com (root@agora.rdrop.com [199.2.210.241]) by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id FAA28702 for ; Mon, 3 Mar 1997 05:17:16 -0800 (PST) Received: from altos.rnd.runnet.ru by agora.rdrop.com with smtp (Smail3.1.29.1 #17) id m0w1Xc7-0008yzC; Mon, 3 Mar 97 05:17 PST Received: from altos.rnd.runnet.ru (altos.rnd.runnet.ru [195.208.248.40]) by altos.rnd.runnet.ru (8.8.5/8.7.3) with SMTP id PAA01934; Mon, 3 Mar 1997 15:49:21 +0300 (MSK) Date: Mon, 3 Mar 1997 15:49:18 +0300 (MSK) From: "Maxim A. Bolotin" Reply-To: "Maxim A. Bolotin" To: Lee Crites cc: hackers@freebsd.org Subject: Re: Please help with digiboard switch settings... In-Reply-To: <1.5.4.32.19970301181002.006bc48c@jump.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-hackers@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Sat, 1 Mar 1997, Lee Crites wrote: Hi! I've Digi too, also I've documetation. There's DigiBoard PC/Xi, PC/16e, MC/Xi and COM/Xi. There is some pictures of the boards. Your labels show that it's PC/8e (AFAK). Maybe This information will help you. Can you check your board for 2 Dip switches on the front. It have to have one 11 and another 8 switches. First (DS1) is : 1 2 3 4 5 6 7 8 9 10 11 ! ! ! ! +------+------+ +--+--+ ! ! Memory Start addres! I/O Port selection. ---------------------- Port Sel. 0FF=0, ON=1 100 100 010 110 110 120 001 200 101 220 011 300 111 320 Memory : - Below 1 MB 11101111 - 080000h 01101111 - 090000h 10101111 - 0a0000h 00101111 - 0b0000h 11001111 - 0c0000h 01001111 - 0d0000h 10001111 - 0e0000h Memory : - Above 1 MB 11110100 - D00000h 11100100 - D80000h 11111000 - E00000h 11101000 - E80000h 11110000 - F00000h 11100000 - F80000h 10100000 - FA0000h 11000000 - FC0000h DS2 - IRQ Selection 00000000 - disable 10000000 IRQ 3 01000000 IRQ 4 00100000 IRQ 5 00010000 IRQ 7 00001000 IRQ 10 00000100 IRQ 11 00000010 IRQ 12 00000001 IRQ 15 I hope it'll help you. Max. > So, I have the board in question in my hand, so here's what I can tell you: > > on the end (you see out the back of the computer): > * one 78-pin female connector > * one four-toggle dip-switch > > on the back (the side without the 'stuff' on it): > * sticker states "PC/8e ISA" with "REV:H" printed on it as well > * sticker states "55-405", "9630", "REV G", and "B85665" > * card has "DI 30001752 REV B" stamped on it (under green film) > > on the front: > * card has "DI AN 30001754 REV _____" stamped on it, on top of the green > film, with "G" handwritten in the blank > > That's it... > > My first thought was to try their web site. No luck. The hardware > documentation which they have on-line, while it looks good, does not > describe anything like my card. And, of course, the supplied utility just > doesn't work on FreeBSD. > > If you can provide any assistance, I would sing your praises... > > Lee > > - Rostov State University Computer Center Rostov-on-Don, +7 (8632) 285794 or 357476 Russia, RUNNet max@run.net.