From owner-freebsd-questions Thu Jan 21 08:59:46 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA26676 for freebsd-questions-outgoing; Thu, 21 Jan 1999 08:59:46 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from ns.clientlogic.com (ns.clientlogic.com [207.51.66.75]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA26670 for ; Thu, 21 Jan 1999 08:59:44 -0800 (PST) (envelope-from ChrisMic@sbservices.com) Received: by SITE0S1 with Internet Mail Service (5.5.2448.0) id ; Thu, 21 Jan 1999 11:59:53 -0500 Message-ID: <6C37EE640B78D2118D2F00A0C90FCB441A5DE2@site2s1> From: Christopher Michaels - SSG To: "'Howard Lew'" Cc: "FreeBSD Mailing List (E-mail)" Subject: RE: Hardware woes - AMD K6/2-300 (?) Date: Thu, 21 Jan 1999 11:59:44 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG For what it's worth there are 3 systems in my home 2 with K6-2/300's and one K6-2/350 and none of them have exhibited any signs of problems at all. I have recompiled the kernel several times and I believe have done 2 make worlds so far. All 3 have the FIC motherboard (VA-503) so that may be related, or maybe you just got a bad chip. > -----Original Message----- > From: Howard Lew [SMTP:digital@www2.shoppersnet.com] > Sent: Thursday, January 21, 1999 1:16 AM > To: Ronald F. Guilmette > Cc: sporkl@ix.netcom.com; questions@FreeBSD.ORG > Subject: Hardware woes - AMD K6/2-300 (?) > > On Wed, 20 Jan 1999, Ronald F. Guilmette wrote: > > > > > In message , you > wrote: > > > > >I have used 2.2.8 on an AMD k6/2-300 system. > > >Signal 11 is segmentation fault, so it would appear that this would be > a > > >memory problem. Is your motherboard's memory configuration compatible > with > > >the memory you are using? > > > > Yes. I have just learned however that there was a known problem with > the > > earlier (pre-C) steppings of the AMD-K6/2 which causes them to be > unreliable > > when used with more than 32MB of memory. This has now been confirmed > for > > me by AMD. > > > > My system has 64MB in it. > > > > The processor that _I_ bought (as part of a complete system) apparently > is > > of the `A' stepping vintage - it has the bug. > > > > Of course, the dealer I bought it from claims that hs has no AMD > K6/2-300s > > which are any later than stepping `A' and that his distributor also has > none > > of any later stepping... Translation? I got screwed. > > > > I have been burned by AMD again! > > The place I work has 3 AMD K6-2 systems: > AMD K6-2 300 with 128MB PC100 Memory > AMD K6-2 333 with 128MB PC100 Memory > AMD K6-2 350 with 64MB EDO 72 Pin Memory > > All are A stepping and only the 350 has the new CXT core. None of them > have stability problems. It sounds to me that either you have a bad cpu > or your motherboard may have stability problems. > > All 3 systems are using the TMC TI5VG+ 1024K Cache MB. Depending on the > memory you have, switching the SDRAM timing to 3 instead of 2 may be > necessary to create a rock solid system. > > But keep in mind that there are some AMD K6-2 300s that are rated for > 66MHz and not the 100MHz bus. The 66MHz bus ones were cheaper... > > However, one of my friends had an AMD K6-2 350 that worked fine (i.e, rock > solid) until he overclocked the bus to 133MHz for kicks just to check out > the performance. The system was not stable at 133MHz bus so when he moved > it back to the 100MHz bus, the cpu would no longer compile the kernel > without dumping core in the process. I guess the CPU was somehow > damaged when overclocked. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message