Date: Thu, 18 Nov 1999 14:57:52 -0600 From: "Jonathan E. Lyons" <parrothd@midwest.net> To: "Dewey, Michael" <mdewey@uswest.com>, "Dewey, Michael" <mdewey@uswest.com>, freebsd-questions@FreeBSD.ORG Subject: RE: Terminal mode in ppp Message-ID: <3.0.5.32.19991118145752.00a6da80@midwest.net> In-Reply-To: <690C7049A180D11194BD00805F6F2CE003BEB15E@denex03.uswmedia. com>
next in thread | previous in thread | raw e-mail | index | archive | help
What type of modem is it, internal/external/PNP/Brand? And what COM port,
I/O and IRQ is it on? What does dmesg say,(More below)
10:01am@parrothd~>dmesg
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.2-RELEASE #0: Sun Nov 7 19:30:16 CST 1999
parrothd@parrothd.midwest.net:/usr/src/sys/compile/PARROTHD.COM
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 46906677 Hz
CPU: Pentium/P5 (46.91-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x517 Stepping=7
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 41943040 (40960K bytes)
avail memory = 37429248 (36552K bytes)
Preloaded elf kernel "kernel" at 0xc035d000.
Probing for devices on PCI bus 0:
chip0: <Intel 82434LX (Mercury) PCI cache memory controller> rev 0x03 on
pci0.0.0
wdc0: <CMD 640B IDE> rev 0x02 int a irq 14 on pci0.1.0
chip1: <Intel 82378ZB PCI to ISA bridge> rev 0x03 on pci0.2.0
vga0: <Cirrus Logic GD5434 SVGA controller> rev 0x8e int a irq 10 on pci0.3.0
ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 11 on pci0.12.0
ed1: address 00:40:05:49:3a:00, type NE2000 (16 bit)
Probing for PnP devices:
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
You should have something like this if your modem is on COM1, post what the
results of dmesg are.
At 01:40 PM 11/18/99 -0700, Dewey, Michael wrote:
>I'm pretty sure that I am using the right COM port (I've tried most of the
>other ones as well just to make sure). I get the following when I type show
>modem:
>
>Name: deflink
> State: open, no carrier
> Device: /dev/cuaa1
> Link Type: interactive
> Connect Count: 1
> Physical outq: 0
> Queued Packets: 0
> Phone Number: N/A
>
>Defaults:
> Device List: /dev/cuaa1
> Characteristics: 38400bps, cs8, no parity, CTS/RTS on
>
Jonathan E. Lyons
parrothd@midwest.net Nucleus Consulting
ICQ # 14226912 www.nucleusconsulting.com
Cell # 773-251-1967 A+, MCSE, CCNA, FreeBSD!
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19991118145752.00a6da80>