Date: Fri, 4 Dec 2009 12:50:06 -0500 From: Jung-uk Kim <jkim@FreeBSD.org> To: freebsd-x11@FreeBSD.org Cc: Robert Noland <rnoland@2hip.net>, Mark Atkinson <atkin901@gmail.com> Subject: Re: kwin composite w/ opengl on r600? Message-ID: <200912041250.10538.jkim@FreeBSD.org> In-Reply-To: <1259942917.2315.223.camel@balrog.2hip.net> References: <hf8snq$epi$1@ger.gmane.org> <hf98o4$o23$1@ger.gmane.org> <1259942917.2315.223.camel@balrog.2hip.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 04 December 2009 11:08 am, Robert Noland wrote:
> On Thu, 2009-12-03 at 12:57 -0800, Mark Atkinson wrote:
> > Robert Noland wrote:
> > > On Thu, 2009-12-03 at 09:32 -0800, Mark Atkinson wrote:
> > >> Hi,
> > >>
> > >> I've been trying to get some of the window effects to work
> > >> under kwin/kde4.x, however I think I'm being stymied by the
> > >> dri mesa build from ports not supporting the r600.
> > >>
> > >> e.g. it only loads/enables the software rasterizer below.
> > >>
> > >> Any hints on getting this working? Can I build the git head
> > >> for r600/mesa and have it works with the ports?
> > >
> > > right now, you need to update libdrm and mesa. For libdrm, you
> > > can just bump the version in the port to 2.4.15 and it should
> > > be fine. For mesa, you need to install from git until 7.6.1 is
> > > released. 7.6 has r600 support, but there were a few bugs that
> > > didn't get addressed prior to release, which make it very
> > > annoying to use in compiz/kde4.
> > >
> > > My normal process is:
> > >
> > > Clone the mesa/mesa repo.
> > >
> > > Use the following to autogen/configure.
> > > CPPFLAGS="${CPPFLAGS} -I/usr/local/include" LDFLAGS="${LDFLAGS}
> > > -L/usr/local/lib" ./autogen.sh --enable-xcb
> > >
> > > gmake
> > >
> > > sudo cp lib/lib* /usr/local/lib
> > > sudo cp lib/*_dri.so /usr/local/lib/dri
> > >
> > > That should have things working pretty well. Note that you
> > > need xf86-video-ati 6.12.4, which I just updated the other day.
> > >
> > > robert.
> >
> > Many thanks, that seems to help. glxgears -info now reports:
> >
> > OpenGL vendor string: Advanced Micro Devices, Inc.
> > OpenGL renderer string: Mesa DRI R600 (RV610 94C1) 20090101
> > x86/MMX/SSE2 TCL OpenGL version string: 1.5 Mesa 7.8-devel
> >
> > If I follow the kde 4.0 composite instructions, compositing is
> > available but is disabled because it is too slow. I only see
> > one suspicious message:
> >
> > (II) AIGLX: Screen 0 is not DRI2 capable
> >
> > If I disable checks, I can run with compositing, but it is
> > definitely very slow.
>
> Hrm, I don't normally use kde, but I have tested with it at times.
> Normally I use compiz+gnome and performance should be more than
> acceptable. Even games like nexuiz, openarena, UT and vdrift
> should be well into the playable range now.
>
> > If you notice anything conflicting in my xorg.conf please let me
> > know. plain text document attachment (xorg.conf)
>
> Actually, I don't see anything odd in this config. The only thing
> I can point out is that I use the radeon driver rather than
> radeonhd, but it isn't clear to me if that could somehow impact
> performance in this area. The only reason that I know of to use
> radeonhd currently is if you need HDMI audio, otherwise radeon has
> everything and more.
I am a happy radeonhd user and x11-drivers/xf86-video-radeonhd-devel
works pretty fine for me on -CURRENT. Here is what I did:
%echo 'WHITELIST="radeon radeonhd"' > ~/.config/compiz/compiz-manager
%env CM_DRY=yes /usr/local/bin/compiz-manager
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using
fallback /var/log/Xorg.0.log
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Comparing resolution (1280x1024) to maximum 3D texture size (4096):
Passed.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
Dry run finished: everything should work with regards to Compiz and
3D.
Execute: /usr/local/bin/compiz --ignore-desktop-hints --replace
--indirect-rendering ccp
If the last line is "Execute: /usr/local/bin/compiz", you are all set.
FYI...
Jung-uk Kim
> What kernel are you running on? Any -CURRENT or -STABLE branch
> should have all the needed bits. If you have a kernel that doesn't
> have r600_blit.c then it will be really slow since the initial code
> used a memcpy before the hardware support was enabled.
>
> robert.
>
> > Section "ServerLayout"
> > Identifier "X.org Configured"
> > Screen 0 "Screen0" 0 0
> > InputDevice "Mouse0" "CorePointer"
> > InputDevice "Keyboard0" "CoreKeyboard"
> > EndSection
> >
> > Section "Files"
> > ModulePath "/usr/local/lib/xorg/modules"
> > FontPath "/usr/local/lib/X11/fonts/misc/"
> > FontPath "/usr/local/lib/X11/fonts/TTF/"
> > FontPath "/usr/local/lib/X11/fonts/OTF"
> > FontPath "/usr/local/lib/X11/fonts/Type1/"
> > FontPath "/usr/local/lib/X11/fonts/100dpi/"
> > FontPath "/usr/local/lib/X11/fonts/75dpi/"
> > EndSection
> >
> > Section "Module"
> > Load "extmod"
> > Load "record"
> > Load "dbe"
> > Load "glx"
> > Load "dri"
> > Load "dri2"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Keyboard0"
> > Driver "kbd"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Mouse0"
> > Driver "mouse"
> > Option "Protocol" "auto"
> > Option "Device" "/dev/sysmouse"
> > Option "ZAxisMapping" "4 5 6 7"
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Monitor0"
> > VendorName "Monitor Vendor"
> > ModelName "Monitor Model"
> > EndSection
> >
> > Section "Device"
> > ### Available Driver options are:-
> > ### Values: <i>: integer, <f>: float, <bool>:
> > "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> > ### [arg]: arg optional
> > #Option "NoAccel" # [<bool>]
> > #Option "AccelMethod" # [<str>]
> > #Option "offscreensize" # [<str>]
> > #Option "SWcursor" # [<bool>]
> > #Option "ignoreconnector" # [<str>]
> > #Option "forcereduced" # [<bool>]
> > #Option "forcedpi" # <i>
> > #Option "useconfiguredmonitor" # [<bool>]
> > #Option "HPD" # <str>
> > #Option "NoRandr" # [<bool>]
> > #Option "RROutputOrder" # [<str>]
> > #Option "DRI" # [<bool>]
> > #Option "TVMode" # [<str>]
> > #Option "ScaleType" # [<str>]
> > #Option "UseAtomBIOS" # [<bool>]
> > #Option "AtomBIOS" # [<str>]
> > #Option "UnverifiedFeatures" # [<bool>]
> > #Option "Audio" # [<bool>]
> > #Option "HDMI" # [<str>]
> > #Option "COHERENT" # [<str>]
> > Identifier "Card0"
> > Driver "radeonhd"
> > Option "AccelMethod" "exa"
> > Option "DRI" "on"
> > VendorName "ATI Technologies Inc"
> > BoardName "RV610 [Radeon HD 2400 XT]"
> > BusID "PCI:1:0:0"
> > EndSection
> >
> > Section "Extensions"
> > Option "Composite" "Enable"
> > EndSection
> >
> > Section "ServerFlags"
> > Option "AIGLX"
> > EndSection
> >
> > Section "DRI"
> > Group "video"
> > Mode 0660
> > EndSection
> >
> > Section "Screen"
> > Identifier "Screen0"
> > DefaultDepth 24
> > SubSection "Display"
> > Depth 24
> > Modes "1600x1200"
> > Virtual 3200 1200
> > EndSubSection
> > EndSection
> > _______________________________________________
> > freebsd-x11@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> > To unsubscribe, send any mail to
> > "freebsd-x11-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200912041250.10538.jkim>