Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 26 May 2011 16:58:37 -0400
From:      Mike Tancsa <mike@sentex.net>
To:        John Baldwin <jhb@freebsd.org>
Cc:        Willy@offermans.rompen.nl, Marcel Moolenaar <marcel@freebsd.org>, freebsd-stable@freebsd.org, freebsd-hardware@freebsd.org
Subject:   Re: modem support MT9234ZPX-PCIE-NV
Message-ID:  <4DDEBEFD.8050902@sentex.net>
In-Reply-To: <201105261612.40451.jhb@freebsd.org>
References:  <20110521092037.GB3271@vpn.offrom.nl>	<201105251236.30188.jhb@freebsd.org>	<20110526190134.GA3037@vpn.offrom.nl> <201105261612.40451.jhb@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On 5/26/2011 4:12 PM, John Baldwin wrote:
> 
> Hmm, can you get 'pciconf -lb' output?
> 
> Hmm, wow, I wonder how uart(4) works at all.  It tries to reuse it's softc
> structure in uart_bus_attach() that was setup in uart_bus_probe().  Since it
> doesn't return 0 from its probe routine, that is forbidden.   I guess it
> accidentally works because of the hack where we call DEVICE_PROBE() again
> to make sure the device description is correct.


I think this is a similar card.  Had it laying about for a while and
popped it in.  cu -l to it, attaches, but I am not able to interact with it.

none3@pci0:5:0:0:       class=0x070002 card=0x20282205 chip=0x015213a8
rev=0x02 hdr=0x00
    vendor     = 'Exar Corp.'
    device     = 'XR17C/D152 Dual PCI UART'
    class      = simple comms
    subclass   = UART
    bar   [10] = type Memory, range 32, base 0xe8950000, size 1024, enabled


NetBSD supposedly has support for this card

http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/dev/pci/pucdata.c.diff?r1=1.43&r2=1.44


	---Mike

-- 
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada   http://www.tancsa.com/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4DDEBEFD.8050902>