From owner-freebsd-bugs Wed Nov 4 09:00:05 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id JAA23007 for freebsd-bugs-outgoing; Wed, 4 Nov 1998 09:00:05 -0800 (PST) (envelope-from owner-freebsd-bugs@FreeBSD.ORG) Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA22953 for ; Wed, 4 Nov 1998 09:00:00 -0800 (PST) (envelope-from gnats@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.8.8/8.8.5) id JAA16984; Wed, 4 Nov 1998 09:00:01 -0800 (PST) Date: Wed, 4 Nov 1998 09:00:01 -0800 (PST) Message-Id: <199811041700.JAA16984@freefall.freebsd.org> To: freebsd-bugs@FreeBSD.ORG From: "Liviu Ionescu" Subject: Re: kern/8555: boot panic with SONY SCSI CD-ROM CDU625-S 1.0r hooked Reply-To: "Liviu Ionescu" Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org The following reply was made to PR kern/8555; it has been noted by GNATS. From: "Liviu Ionescu" To: Cc: Subject: Re: kern/8555: boot panic with SONY SCSI CD-ROM CDU625-S 1.0r hooked Date: Wed, 4 Nov 1998 18:53:05 +0200 > Thanks for the detailed information. I believe this problem (the panic, at > least) has been fixed in FreeBSD-current. ok, as soon as I'll have time to test the current version, I'll check it. > A lot of the Sony CDROM drives don't behave properly when they are probed > on multiple LUNs. > Try applying the attached patch to src/sys/cam/cam_xpt.c, and see if it > fixes your problem. It disables multi-lun probing for most every Sony > CDROM drive, since as far as I can tell, most of them behave badly. > The patch may or may not apply cleanly to your version of cam_xpt.c, but at > least you can get an idea of the quirk entry you need to disable multi-LUN > probing for your CDROM drive. I applied the patch and (bingo!) the kernel now boots without panic. the picture also changed a bit, the CD-ROM is listed now at 20.0MB/s. but when I try to mount a disc I get an error: boca# mount /dev/cd0c /mnt mount: Input/output error and the syslog shows: Nov 4 19:50:03 boca /kernel: (cd0:ahc1:0:3:0): parity error during Command phase. Nov 4 19:50:03 boca /kernel: (cd0:ahc1:0:3:0): parity error during Command phase. Nov 4 19:50:03 boca /kernel: SEQADDR == 0x153 Nov 4 19:50:03 boca /kernel: SEQADDR == 0x153 Nov 4 19:50:03 boca /kernel: SCSIRATE == 0xf Nov 4 19:50:03 boca /kernel: SCSIRATE == 0xf Nov 4 19:50:12 boca /kernel: (cd0:ahc1:0:3:0): parity error during Command phase. Nov 4 19:50:12 boca /kernel: (cd0:ahc1:0:3:0): parity error during Command phase. Nov 4 19:50:12 boca /kernel: SEQADDR == 0x153 Nov 4 19:50:12 boca /kernel: SEQADDR == 0x153 Nov 4 19:50:12 boca /kernel: SCSIRATE == 0xf Nov 4 19:50:12 boca /kernel: SCSIRATE == 0xf I also tried to remove the parity/termination jumpers from the Sony drive, without success. anyway, I remember that exactly the same hardware configuration worked fine with 2.2.7 with cam patches applied, so it shouldn't be a parity/terminator misconfiguration. regards, Liviu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message