Date: Mon, 28 Apr 2003 11:56:21 +0200 From: Martin Klaffenboeck <martin.klaffenboeck@gmx.at> To: ports freebsd group <ports@FreeBSD.org> Subject: Re: mod_php4 fails. Message-ID: <20030428095621.GE534@martin.kleinerdrache.org> In-Reply-To: <20030428095556.GC534@martin.kleinerdrache.org>; from martin.klaffenboeck@gmx.at on Mo, Apr 28, 2003 at 11:55:56 %2B0200 References: <20030428082655.GA534@martin.kleinerdrache.org> <3EACF761.2090005@liwing.de> <20030428095556.GC534@martin.kleinerdrache.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--NU0Ex4SbNnrxsi6C Content-Type: text/plain; format=flowed; charset=ISO-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit Am 2003.04.28 11:41 schrieb(en) Jens Rehsack: > On 4/28/2003 10:26 AM, Martin Klaffenboeck wrote: > > Hello, as the Port want's, I send you this report. > > > > configure: error: Problem with libjpeg.(a|so). Please check > config.log > > for more information. > > ===> Script "configure" failed unexpectedly. > > Please report the problem to dirk@FreeBSD.org [maintainer] > and > > attach > > the > "/var/tmp/usr/ports/www/mod_php4/work/php-4.3.1/config.log" > > > including > > the output of the failure of your make command. Also, it > might > > be a > > good idea to provide an overview of all packages installed on > > > your > > system (e.g. an `ls /var/db/pkg`). > > *** Error code 1 > > > > File is attached. > > Can you please submit the portversion of php and the environment you > use > to build (uname -a, dmesg, command line, make.conf, ...). Here it is: martin# uname -a FreeBSD martin.kleinerdrache.org 4.8-STABLE FreeBSD 4.8-STABLE #0: Tue Apr 22 18:54:10 CEST 2003 martin@martin.kleinerdrache.org:/usr/src/sys/compile/MYKERNEL i386 command line: martin# portupgrade mod_php4 Attached make.conf Attached dmesg.out Martin > > Martin > > Jens > > > -- PGP-Key: http://www.thats-me.net/pgp.asc --NU0Ex4SbNnrxsi6C Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="make.conf" #STRIP= #CFLAGS= -O -pipe -g CPUTYPE=i686 CFLAGS?= -O -pipe INSTALL=install -C NO_LPR= true # do not build lpr and related programs NO_SENDMAIL= true # do not build sendmail and related programs NOGAMES= true # do not build games (games/ subdir) COMPAT3X= yes PRINTERDEVICE= ps BOOTWAIT=4000 XFREE86_VERSION=4 MASTER_SITE_BACKUP = \ ftp://ftp.de.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ MASTER_SITE_XFREE= ftp://ftp.freesoftware.com/pub/XFree86/%SUBDIR%/source/ MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ MASTER_SITE_KDE= ftp://download.at.kde.org/pub/kde/%SUBDIR%/ MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/sources/%SUBDIR%/ MASTER_SITE_MOZILLA= ftp://ftp.yggdrasil.com/mirrors/site/ftp.mozilla.org/pub/%SUBDIR%/ MASTER_SITE_XEMACS= ftp://ftp.sunsite.utk.edu/pub/xemacs/%SUBDIR%/ MASTER_SITE_TCLTK= ftp://ftp.uu.net/languages/tcl/%SUBDIR%/ MASTER_SITE_RUBY= ftp://ftp.fu-berlin.de/unix/languages/ruby/%SUBDIR%/ SUP_UPDATE= yes SUP= /usr/local/bin/cvsup SUPFLAGS= -g -L 1 SUPHOST= cvsup.at.FreeBSD.org PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile DOC_LANG= de_AT.ISO_8859-1 PERL_VER=5.8.0 PERL_VERSION=5.8.0 PERL_ARCH=mach NOPERL=yo NO_PERL=yo NO_PERL_WRAPPER=yo WRKDIRPREFIX=/var/tmp COMPAT4X= true WITH_GTK2= yes MAKE_IDEA= YES XFREE86_VERSION= 4 WITH_GTK= yes WITH_GNOME= yes WITH_GNOME_DESKTOP=2 WITH_OPTIMIZED_CFLAGS= yes KERNCONF= MYKERNEL NO_BIND= true WITHOUT_RUNTIME_CPUDETECTION=yes NO_IPFILTER= true ASPELL_EN= yes ASPELL_DE= yes WITH_ASPELL= yes WITHOUT_IJS= yes WITHOUT_MAILNEWS= yes WITHOUT_LDAP= yes WITHOUT_CHATZILLA= yes WITHOUT_COMPOSER= yes WITH_HERMES= yes WITH_MYSQL= yes WITH_PYTHON= yes WITH_GUI= yes BUILD_OPTIMIZED= yes SKIP_INSTALL_DB= yes WITH_NATIVE_THREADS=yes NODEBUG=yes NATIVE_BOOTSTRAP=yes WITH_GIMP= yes WITH_GUCHARMAP=yes WITH_DVD=yes WITH_LIBDVDNAV=yes WITH_LIBDV=yes WITH_MAD=yes WITH_VORBIS=yes WITH_XVID=yes WITH_LIBDVDREAD=yes WANT_GTK=yes WITH_GPG=yes A4=yes --NU0Ex4SbNnrxsi6C Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.out" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-STABLE #0: Tue Apr 22 18:54:10 CEST 2003 martin@martin.kleinerdrache.org:/usr/src/sys/compile/MYKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (1394.07-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x644 Stepping = 4 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> real memory = 268435456 (262144K bytes) avail memory = 256438272 (250428K bytes) Preloaded elf kernel "kernel" at 0xc04d2000. Preloaded elf module "linux.ko" at 0xc04d209c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 8 entries at 0xc00f7780 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0 pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <NVidia model 0111 graphics accelerator> at 0.0 irq 5 isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 5 at device 2.2 on pci0 usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 11 at device 2.3 on pci0 usb1: OHCI version 1.0, legacy support usb1: <SiS 5571 USB controller> on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered atapci0: <SiS 5591 ATA100 controller> port 0xff00-0xff0f at device 2.5 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <SiS 7012> port 0xd400-0xd43f,0xdc00-0xdcff irq 11 at device 2.7 on pci0 pcm0: <unknown ac97 codec> (id=0x414c4326) ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xd000-0xd01f irq 11 at device 13.0 on pci0 ed0: address 00:02:44:01:d5:bd, type NE2000 (16 bit) ed1: <NE2000 PCI Ethernet (RealTek 8029)> port 0xcc00-0xcc1f irq 5 at device 15.0 on pci0 ed1: address 00:02:44:01:d5:bc, type NE2000 (16 bit) sym0: <810a> port 0xd800-0xd8ff mem 0xcfffff00-0xcfffffff irq 5 at device 17.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking pcib1: <SiS 5591 host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROM> at iomem 0xc0000-0xcb7ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port unknown: <PNP0000> can't assign resources unknown: <PNP0303> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0400> can't assign resources unknown: <PNP0700> can't assign resources unknown: <PNP0f13> can't assign resources IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled ad0: 38166MB <ST340810A> [77545/16/63] at ata0-master UDMA100 acd0: DVD-ROM <LITEON DVD-ROM LTD122> at ata1-master UDMA33 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s1a cd0 at sym0 bus 0 target 2 lun 0 cd0: <RICOH MP6200S 1.00> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present ed0: promiscuous mode enabled pid 94669 (realplay), uid 1001: exited on signal 11 (core dumped) pid 94724 (gs), uid 1001: exited on signal 11 (core dumped) pid 94725 (gs), uid 1001: exited on signal 11 (core dumped) pid 94726 (gs), uid 1001: exited on signal 11 (core dumped) --NU0Ex4SbNnrxsi6C--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030428095621.GE534>