Date: Thu, 30 Oct 2003 12:27:07 +0100 From: "Brunoc@quipo.it" <brunoc@quipo.it> To: <freebsd-questions@freebsd.org> Cc: freebsd-newbies@freebsd.org Subject: xinit: "xf86OpenConsole: Server must be running with root permissions" Message-ID: <008c01c39ed8$c1aa64c0$5e045e3e@computer>
next in thread | raw e-mail | index | archive | help
Hi, I just installed a port (fluxconf).That port installed Xfree86 Libraries = 4.3.0. Since then,when I invoke xinit, it exits with the error "xf86OpenConsole: Server must be running with root permissions" I include the output of 'uname -a' and=20 the brief output from xinit for the problem Thank you very much Bruno bruno@ciao (/dev/ttyp0) /usr/home/bruno 2>> uname -a FreeBSD ciao.singles.it 4.9-RC FreeBSD 4.9-RC #0: Wed Oct 15 00:12:26 = CEST 2003 root@:/usr/obj/usr/src/sys/CURRENT_WINE i386 bruno@ciao (/dev/ttyp0) /usr/home/bruno 2>>xinit XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.1.1-STABLE i386 [ELF]=20 Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 1): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, = ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, = ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, = tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, = tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, = cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, = clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, = clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, = clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, = mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, = oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, = ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, = ark1000pv, ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_savage, s3_virge, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, = i740_pci, i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic Fatal server error: xf86OpenConsole: Server must be running with root permissions You should be using Xwrapper to start the server or xdm. We strongly advise against making the server SUID root! When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). =3D=3D=3D bruno@searchingjob (/dev/ttyp0) /usr/home/bruno 3>>exit Script done on Thu Oct 30 10:40:19 2003 --- [Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus] [Quipo ISP - This E-mail was scanned for viruses by Declude Virus]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?008c01c39ed8$c1aa64c0$5e045e3e>