Date: Thu, 5 Aug 1999 21:39:34 -0700 From: "Park, No Il" <No.Il.Park@kla-tencor.com> To: "'Doug White '" <dwhite@resnet.uoregon.edu> Cc: "'questions@FreeBSD.org'" <questions@FreeBSD.org> Subject: RE: Lexmark 1100 Printer problem Message-ID: <C3DBC21A216DD1118BDD0060B058DDBF5DFD55@korexchange1.kla-tencor.com>
next in thread | raw e-mail | index | archive | help
Thanks about your answer. But I did that already. I say my problem again.
I made kernel for printer following the procedure on book, 'The complete
Free BSD by Greg Lehey' and Man page about 'ppc,ppbus'
My configuration of printer is (ver. 3.2 of FreeBSD) :
device ppc0 at isa? port? tty irq 7
controller ppbus0
lpt0 at ppbus?
I checked these ones on the dmesg after booting the system.
Tried to test printer with lptest like 'lptest > /dev/lpt0'
Printer made big noise and hang-up.
On the screen showed like :
#>lptest > /dev/lpt0
<-- no answer and big noise but sometimes print working
in the right edge side. Did not go center.
[ctrl]+c
#>lptest > /dev/lpt0
busy
Usually, Symptom is
-Do not working anything.
-Working but no output and Head of printer is moving withine small length at
right edge side. Also No feed paper out.
I am tired to set up printer with FreeBSD. Pls Tell me what is solution or
document to solve this problem.
Thanks.
Sincerely yours,
Park, No Il
-----Original Message-----
From: Doug White
To: Park, No Il
Cc: 'questions@FreeBSD.org'
Sent: 8/5/99 6:47 PM
Subject: Re: Lexmark 1100 Printer problem
On Wed, 4 Aug 1999, Park, No Il wrote:
> Could Somebody help me? I have a problem to set my Lexmark 1100
printer
> under FreeBSD 3.2. When I set up printer and tried to test
communicatio to
> prinetr by using 'lptest > /dev/lpt0', Prinetr didn't work normaly. I
heard
> only big noise and hang-up. Also The other function same thing. How
can I
> do?
Press the 'form-feed' button on the printer to eject the page in memory.
Doug White
Internet: dwhite@resnet.uoregon.edu | FreeBSD: The Power to Serve
http://gladstone.uoregon.edu/~dwhite | www.freebsd.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C3DBC21A216DD1118BDD0060B058DDBF5DFD55>