Date: Tue, 14 Feb 2006 01:24:56 -0800 (PST) From: Oleg Polyakov <opolyakov@yahoo.com> To: Gleb Smirnoff <glebius@FreeBSD.org>, Harti Brandt <harti@FreeBSD.org> Cc: freebsd-net@FreeBSD.org, Anders Nordby <anders@FreeBSD.org>, kuriyama@FreeBSD.org, demon@FreeBSD.org Subject: Re: 64-bit SNMP counters for FreeBSD && graphing bandwidth usage Message-ID: <20060214092456.97708.qmail@web35309.mail.mud.yahoo.com> In-Reply-To: <20060214084459.GL86448@cell.sick.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
--0-852782144-1139909096=:97443 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Content-Id: Content-Disposition: inline --- Gleb Smirnoff <glebius@FreeBSD.org> wrote: > On Tue, Feb 14, 2006 at 09:39:00AM +0100, Harti Brandt wrote: > H> AN>I changed port to 163 cause I am actually using net-snmp snmpd on port > H> AN>161 still. Anyway, it seems bsnmpd insists these are 10 mbps > interfaces? > H> AN>Why so? > H> > H> The driver reports a speed of 10Mbits/sec. ifHighSpeed is ifi_baudrate > H> divided by 10^6 (and rounded). This is the default set by ether_ifattach() > > H> if the driver did not set another value. It seems that bge never sets that > > H> value so you end up with the default. This looks like a bug. > > Harti, we are thinking in parallel :) Parallel, yes ;) Here is the attached patch written just yesterday, not tested yet. It takes care of different bge adapters - some of them Fast Ethernets. --- Oleg > Andres, pls try the attached patch. > > -- > Totus tuus, Glebius. > GLEBIUS-RIPN GLEB-RIPE > > Index: if_bge.c > =================================================================== > RCS file: /home/ncvs/src/sys/dev/bge/if_bge.c,v > retrieving revision 1.118 > diff -u -r1.118 if_bge.c > --- if_bge.c 30 Jan 2006 13:45:55 -0000 1.118 > +++ if_bge.c 14 Feb 2006 08:43:24 -0000 > @@ -2192,6 +2192,7 @@ > ifp->if_snd.ifq_drv_maxlen = BGE_TX_RING_CNT - 1; > IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen); > IFQ_SET_READY(&ifp->if_snd); > + ifp->if_baudrate = IF_Gbps(1); > ifp->if_hwassist = BGE_CSUM_FEATURES; > ifp->if_capabilities = IFCAP_HWCSUM | IFCAP_VLAN_HWTAGGING | > IFCAP_VLAN_MTU | IFCAP_VLAN_HWCSUM; > > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com --0-852782144-1139909096=:97443 Content-Type: text/plain; name="if_bge.c.diff.txt" Content-Description: 2950440673-if_bge.c.diff.txt Content-Disposition: inline; filename="if_bge.c.diff.txt" --- if_bge.c.orig Tue Feb 14 00:52:58 2006 +++ if_bge.c Tue Feb 14 00:54:42 2006 @@ -2183,6 +2183,12 @@ } ifp->if_softc = sc; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); + if ((pci_get_vendor(dev) == BCOM_VENDORID) && + ((pci_get_device(dev) == BCOM_DEVICEID_BCM5901) || + (pci_get_device(dev) == BCOM_DEVICEID_BCM5901A2))) { + ifp->if_baudrate = 100000000; + } + else ifp->if_baudrate = 1000000000; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = bge_ioctl; ifp->if_start = bge_start; --0-852782144-1139909096=:97443--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060214092456.97708.qmail>