From owner-freebsd-questions Thu Jun 24 21:33:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from kot.ne.mediaone.net (kot.ne.mediaone.net [24.218.15.88]) by hub.freebsd.org (Postfix) with ESMTP id 9ED0D1557E for ; Thu, 24 Jun 1999 21:33:38 -0700 (PDT) (envelope-from mi@aldan.algebra.com) Received: from guest.newton (guest.newton [10.10.0.3]) by kot.ne.mediaone.net (8.9.1a/8.9.1) with ESMTP id AAA23201 for ; Fri, 25 Jun 1999 00:32:34 -0400 (EDT) From: Mikhail Teterin X-Relay-IP: 10.10.0.3 Received: (from mi@localhost) by guest.newton (8.9.3/8.9.1) id AAA20329 for questions@freebsd.org; Fri, 25 Jun 1999 00:33:19 -0400 (EDT) Message-Id: <199906250433.AAA20329@guest.newton> Subject: PCI sound board, apm on a dual PII To: questions@freebsd.org Date: Fri, 25 Jun 1999 00:33:19 -0400 (EDT) X-Mailer: ELM [version 2.4ME+ PL60 (25)] MIME-Version: 1.0 Content-Type: multipart/mixed; boundary=ELM930285199-17779-0_ Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --ELM930285199-17779-0_ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hello! I have questions about the machine I'm setting up. First is the power management. When the machine boots, there is a line: chip2: rev 0x02 on pci0.18.3 Unfortunately, it is soon followed by the: ``apm0 not found''. Another question relates to this strange looking sound card/modem combination I pulled out of another machine (where it worked under Win98). It consists of two separate PCI boards, one being a sound card (Ensoniq) with two inputs for two CD-ROM audios and third cable going into the other card that is a modem. No new serial ports or anything appeared when I put this cards in... Do I stand a chance of using the modem at all? What about utilizing its connection to the sound card? No ISA cards are in a machine. Full dmesg output is attached. Thanks for any suggestions, -mi --ELM930285199-17779-0_ Content-Type: text/plain; charset=KOI8-R Content-Disposition: attachment; filename=dmesg.boot Content-Description: dmesg.boot Content-Transfer-Encoding: 7bit ncr 53c875 fast20 wide scsi> rev 0x37 int b irq 22 on pci0.13.1 ncr1: minsync=12, maxsync=137, maxoffs=16, 128 dwords burst, large dma fifo ncr1: single-ended, open drain IRQ driver, using on-chip SRAM Freeing (NOT implemented) redirected PCI irq 11. found-> vendor=0x1274, dev=0x1371, revid=0x02 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=18 map[0]: type 4, range 32, base 0000fc40, size 6 Freeing (NOT implemented) redirected PCI irq 11. found-> vendor=0x8086, dev=0x1229, revid=0x05 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=20 map[0]: type 3, range 32, base fedfb000, size 12 map[1]: type 4, range 32, base 0000fce0, size 5 map[2]: type 1, range 32, base feb00000, size 20 fxp0: rev 0x05 int a irq 20 on pci0.15.0 fxp0: Ethernet address 00:a0:c9:83:0b:d5 bpf: fxp0 attached found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 chip1: rev 0x02 on pci0.18.0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[0]: type 4, range 32, base 0000fcb0, size 4 Freeing (NOT implemented) redirected PCI irq 5. found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=22 map[0]: type 4, range 32, base 0000fcc0, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 chip2: rev 0x02 on pci0.18.3 found-> vendor=0x1013, dev=0x00bc, revid=0x23 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[0]: type 3, range 32, base fa000000, size 25 map[1]: type 1, range 32, base fedfc000, size 12 vga1: rev 0x23 on pci0.20.0 Initializing PnP override table Probing for PnP devices: Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 No Plug-n-Play devices were found Probing for devices on the ISA bus: atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0 on isa sc0: fb0 kbd0 sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 90 03 3c psm: status 90 03 3c psm: status 90 03 3c psm: status 00 00 28 psm: data 08 00 00 psm: data 08 00 00 psm: status 00 02 64 psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: configured irq 5 not in bitmap of probed irqs 0 sio2: irq maps: 0x1 0x1 0x1 0x1 sio2: probe failed test(s): 0 1 2 4 6 7 9 sio2 not found at 0x3e8 sio3: configured irq 9 not in bitmap of probed irqs 0 sio3: irq maps: 0x1 0x1 0x1 0x1 sio3: probe failed test(s): 0 1 2 4 6 7 9 sio3 not found at 0x2e8 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa wdc1: unit 0 (atapi): , removable, accel, dma, iordis acd0: drive speed 171 - 4125KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked, lock protected ppc: parallel port found at 0x378 ppc: chipset forced to generic ppc0: ECP SPP SPP ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: on ppbus 0 lpt0: Interrupt-driven port vpo0: can't connect to the drive imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38 imm0: (connect) s1=0x38 s2=0x38, s3=0x38 imm0: can't connect to the drive vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0x0 size:0k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 6f 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 05 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 6f 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 05 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff npx0 on motherboard npx0: INT 16 interface apm0 not found imasks: bio c8008040, tty c300101a, net c6100080 SMP: enabled INTs: 1, 3, 4, 6, 7, 12, 15, 20, 21, 22, apic_imen: 0x008f6f25 BIOS Geometries: 0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors 0 accounted for Device configuration finished. APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 bpf: tun0 attached bpf: tun1 attached bpf: tun2 attached bpf: tun3 attached bpf: tun4 attached bpf: tun5 attached bpf: tun6 attached bpf: tun7 attached bpf: lo0 attached Waiting 5 seconds for SCSI devices to settle ncr0: restart (scsi reset). ncr1: restart (scsi reset). SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff (probe16:ncr1:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe16:ncr1:0:1:0): ILLEGAL REQUEST asc:24,0 (probe16:ncr1:0:1:0): Invalid field in CDB pass0 at ncr0 bus 0 target 3 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number JDD591830LZS1M pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled pass1 at ncr1 bus 0 target 1 lun 0 pass1: Removable CD-ROM SCSI-2 device pass1: 3.300MB/s transfers da0 at ncr0 bus 0 target 3 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number JDD591830LZS1M da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C) Considering FFS root f/s. changing root device to da0s1a da0s1: type 0xa5, start 0, end = 8496883, size 8496884 da0s1: C/H/S end 528/231/11 (1350007) != end 8496883: invalid (cd0:ncr1:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ncr1:0:1:0): NOT READY asc:3a,0 (cd0:ncr1:0:1:0): Medium not present cd0 at ncr1 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present start_init: trying /sbin/init ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates --ELM930285199-17779-0_-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message