Date: Mon, 25 Oct 1999 16:45:58 -0700 From: Mark Murray <mark@grondar.za> To: imp@freebsd.org Cc: mobile@freebsd.org Subject: PCIC's broken on Libretto.... Message-ID: <199910252345.QAA00360@grimreaper.grondar.za>
next in thread | raw e-mail | index | archive | help
Hi Warner
I have been following your patches for a couple of days now,
(sorry for lack of feedback), and my PCIC's are still broken.
Below is a dmesg output. Anything else you need? My sources
include all of your commits except the latest memory mapping
stuff.
The symptoms are complete lack of activity on the pcics, and
"no pcics present" (paraphased) when I type 'pccardd'.
M
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Mon Oct 25 16:17:12 PDT 1999
root@grimreaper.grondar.za:/usr/src/sys/compile/LIBRETTO
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (233.29-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67174400 (65600K bytes)
avail memory = 62545920 (61080K bytes)
Preloaded elf kernel "kernel.debug" at 0xc0272000.
Intel Pentium detected, installing workaround for F00F bug
VESA: v2.0, 1984k memory, flags:0x0, mode table:0xc022dae2 (1000022)
VESA: MagicGraph 128XD 40K SVGA BIOS
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
vga-pci0: <NeoMagic NM2160 laptop SVGA controller> at device 4.0 on pci0
pci0: unknown card (vendor=0x1179, dev=0x0701) at 17.0 irq 11
pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 19.0 on pci0
pcic1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 19.1 on pci0
devclass_alloc_unit: pcic0 already exists, using next available unit number
devclass_alloc_unit: pcic1 already exists, using next available unit number
isa0: <ISA bus> on motherboard
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
wdc0 at port 0x1f0-0x1f7 irq 14 flags 0xe0ff on isa0
wdc0: unit 0 (wd0): <TOSHIBA MK4310MAT>, 32-bit, multi-block-16, sleep-hack
wd0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcm0: <OPL3-SAx (YMF719)> at port 0x530-0x53f,0x370-0x371 irq 5 drq 1 flags 0xc100 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
changing root device to wd0s2a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199910252345.QAA00360>