Date: Wed, 11 Nov 1998 08:33:26 -0500 From: Stephen Derdau <sderdau@ne.mediaone.net> To: jumpmaster@citrine.cyberstation.net, FreeBSD-questions@FreeBSD.ORG Subject: Re: Please...Please...Nedd help troubleshooting User PPP with 2.2.7 Message-ID: <36499226.98E83CA@ne.mediaone.net> References: <36498F0B.5F539352@cst.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Here is a ppp.conf that worked for me. I hopemaybe it will help you !!! Also did you see the turorial section at http://www.freebsd.org/ ? There is a tutorial on ppp. ################################################################# # # PPP Sample Configuration File # # Written by Toshiharu OHNO # # $Id: ppp.conf.sample,v 1.5.2.6 1997/05/12 14:08:52 brian Exp $ # ################################################################# # Default setup. Always executed when PPP is invoked. # default: set device /dev/cuaa1 set speed 19200 # disable lqr # deny lqr # set log Phase Chat Connect Carrier LCP IPCP CCP command tun set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEO UT 40 CONNECT" # set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5\"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEO UT 40 CONNECT" set phone 999999 set redial 3 10 # # demand: set authname YOURUSERNAME set authkey YOURPASSWORD set phone 2631410 set timeout 0 set openmode active accept pap set ifaddr 10.146.135.247/0 10.146.132.34/0 255.255.255.0 delete ALL add 0 0 10.146.132.34 Glen Hite wrote: > > I have set up user ppp on my 2.2.7 FreeBSD box as shown in the manual > & samples in the "/etc/ppp" dir but I am having trouble making a > connection to my ISP. > The system dials in and appears to be negotiating pap authintication > then disconnects. I have > edited the following files thus far. > /etc/host.conf > /etc/hosts > /etc/resolv.conf > /etc/ppp/ppp.conf > /etc/linkup > /etc/rc.conf > > I am currently invoking ppp from the command line ( while testing ) with > > ppp -auto -alias demand > > Can anyone take a look at my ppp.log file and make sense of what may be > the problem? > > Here it is, any help will save what little hair I have left! > > Nov 10 14:07:11 puff ppp[177]: tun0: Command: demand: accept pap > Nov 10 14:07:11 puff ppp[177]: tun0: Command: demand: disable pap > Nov 10 14:07:11 puff ppp[177]: tun0: Command: demand: disable chap > Nov 10 14:07:11 puff ppp[177]: tun0: Command: demand: set authname > jumpmaster > Nov 10 14:07:11 puff ppp[177]: tun0: Command: demand: set authkey > ******** > Nov 10 14:07:11 puff ppp[177]: tun0: Command: demand: set timeout 300 > Nov 10 14:07:11 puff ppp[177]: tun0: Command: demand: set ifaddr > 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > Nov 10 14:07:11 puff ppp[177]: tun0: Command: demand: delete ALL > Nov 10 14:07:11 puff ppp[177]: tun0: Command: demand: add default > HISADDR > Nov 10 14:07:12 puff ppp[178]: tun0: Phase: PPP Started. > Nov 10 14:07:36 puff ppp[178]: tun0: Phase: Connected! > Nov 10 14:07:36 puff ppp[178]: tun0: Chat: Dial attempt 1 of 1 > Nov 10 14:07:36 puff ppp[178]: tun0: Chat: Expecting: > Nov 10 14:07:36 puff ppp[178]: tun0: Chat: Sending: AT^M > Nov 10 14:07:36 puff ppp[178]: tun0: Chat: Expecting: OK-AT-OK > Nov 10 14:07:36 puff ppp[178]: tun0: Chat: Wait for (5): OK > Nov 10 14:07:36 puff ppp[178]: tun0: Connect: AT^M^M > Nov 10 14:07:36 puff ppp[178]: tun0: Connect: OK > Nov 10 14:07:36 puff ppp[178]: tun0: Chat: Sending: AT&F^M > Nov 10 14:07:36 puff ppp[178]: tun0: Chat: Expecting: OK > Nov 10 14:07:36 puff ppp[178]: tun0: Chat: Wait for (5): OK > Nov 10 14:07:36 puff ppp[178]: tun0: Connect: ^M > Nov 10 14:07:37 puff ppp[178]: tun0: Connect: AT&F^M^M > Nov 10 14:07:37 puff ppp[178]: tun0: Connect: OK > Nov 10 14:07:39 puff ppp[178]: tun0: Phase: Phone: 691-1046 > Nov 10 14:07:39 puff ppp[178]: tun0: Chat: Sending: ATDT691-1046^M > Nov 10 14:07:39 puff ppp[178]: tun0: Chat: Expecting: CONNECT > Nov 10 14:07:39 puff ppp[178]: tun0: Chat: Wait for (40): CONNECT > Nov 10 14:07:39 puff ppp[178]: tun0: Connect: ^M > Nov 10 14:07:56 puff ppp[178]: tun0: Connect: ATDT691-1046^M^M > Nov 10 14:07:56 puff ppp[178]: tun0: Connect: CONNECT > Nov 10 14:07:56 puff ppp[178]: tun0: IPCP: Using trigger address 0.0.0.0 > > Nov 10 14:07:56 puff ppp[178]: tun0: LCP: State change Initial --> > Closed > Nov 10 14:07:56 puff ppp[178]: tun0: LCP: State change Closed --> > Stopped > Nov 10 14:07:57 puff ppp[178]: tun0: LCP: LcpSendConfigReq > Nov 10 14:07:57 puff ppp[178]: tun0: LCP: ACFCOMP[2] > Nov 10 14:07:57 puff ppp[178]: tun0: LCP: PROTOCOMP[2] > Nov 10 14:07:57 puff ppp[178]: tun0: LCP: ACCMAP[6] 0x00000000 > Nov 10 14:07:57 puff ppp[178]: tun0: LCP: MRU[4] 1500 > Nov 10 14:07:57 puff ppp[178]: tun0: LCP: MAGICNUM[6] 0x2bdf6338 > Nov 10 14:07:57 puff ppp[178]: tun0: LCP: State change Stopped --> > Req-Sent > Nov 10 14:08:00 puff ppp[178]: tun0: LCP: LcpSendConfigReq > Nov 10 14:08:00 puff ppp[178]: tun0: LCP: ACFCOMP[2] > Nov 10 14:08:00 puff ppp[178]: tun0: LCP: PROTOCOMP[2] > Nov 10 14:08:00 puff ppp[178]: tun0: LCP: ACCMAP[6] 0x00000000 > Nov 10 14:08:00 puff ppp[178]: tun0: LCP: MRU[4] 1500 > Nov 10 14:08:00 puff ppp[178]: tun0: LCP: MAGICNUM[6] 0x2bdf6338 > Nov 10 14:08:03 puff ppp[178]: tun0: LCP: LcpSendConfigReq > Nov 10 14:08:03 puff ppp[178]: tun0: LCP: ACFCOMP[2] > Nov 10 14:08:03 puff ppp[178]: tun0: LCP: PROTOCOMP[2] > Nov 10 14:08:03 puff ppp[178]: tun0: LCP: ACCMAP[6] 0x00000000 > Nov 10 14:08:03 puff ppp[178]: tun0: LCP: MRU[4] 1500 > Nov 10 14:08:03 puff ppp[178]: tun0: LCP: MAGICNUM[6] 0x2bdf6338 > Nov 10 14:08:06 puff ppp[178]: tun0: LCP: LcpSendConfigReq > Nov 10 14:08:06 puff ppp[178]: tun0: LCP: ACFCOMP[2] > Nov 10 14:08:06 puff ppp[178]: tun0: LCP: PROTOCOMP[2] > Nov 10 14:08:06 puff ppp[178]: tun0: LCP: ACCMAP[6] 0x00000000 > Nov 10 14:08:06 puff ppp[178]: tun0: LCP: MRU[4] 1500 > Nov 10 14:08:06 puff ppp[178]: tun0: LCP: MAGICNUM[6] 0x2bdf6338 > Nov 10 14:08:09 puff ppp[178]: tun0: LCP: LcpSendConfigReq > Nov 10 14:08:09 puff ppp[178]: tun0: LCP: ACFCOMP[2] > Nov 10 14:08:09 puff ppp[178]: tun0: LCP: PROTOCOMP[2] > Nov 10 14:08:09 puff ppp[178]: tun0: LCP: ACCMAP[6] 0x00000000 > Nov 10 14:08:09 puff ppp[178]: tun0: LCP: MRU[4] 1500 > Nov 10 14:08:09 puff ppp[178]: tun0: LCP: MAGICNUM[6] 0x2bdf6338 > Nov 10 14:08:12 puff ppp[178]: tun0: LCP: State change Req-Sent --> > Stopped > Nov 10 14:08:12 puff ppp[178]: tun0: LCP: LcpLayerFinish > Nov 10 14:08:13 puff ppp[178]: tun0: Phase: Modem: Connect time: 37 > secs: 457 octets in, 262 octets out > Nov 10 14:08:13 puff ppp[178]: tun0: Phase: total 19 bytes/sec > Nov 10 14:08:13 puff ppp[178]: tun0: Phase: NewPhase: Dead > Nov 10 14:08:13 puff ppp[178]: tun0: IPCP: Using trigger address 0.0.0.0 > > Nov 10 14:08:13 puff ppp[178]: tun0: Phase: Disconnected! > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Thank You /SD FreeBSD 2.2.7-STABLE #0: Mon Aug 24 02:20:10 EDT 1998 **http://www.freebsd.org/search.html "Alot of answers found here see FAQ's"** ***** FreeBSD IT's HARD TO BELIEVE IT IS FREE ! http://www.FreeBSD.org ***** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36499226.98E83CA>