Date: Sat, 18 Jul 2009 10:29:00 -0800 From: Mel Flynn <mel.flynn+fbsd.questions@mailing.thruhere.net> To: usb@freebsd.org Cc: Andrey Shuvikov <mr.hyro@gmail.com>, freebsd-questions@freebsd.org Subject: Zero size allocation with Yealink VOIP USB Phone, 7.2-RELEASE (Was: Re: hald: kmem_malloc error) Message-ID: <200907181029.00939.mel.flynn%2Bfbsd.questions@mailing.thruhere.net> In-Reply-To: <24393ae80907180929x71d2cf1frb8f1c900bf79c46a@mail.gmail.com> References: <24393ae80907171959u62705d8akb1e0aaec1d2f2c44@mail.gmail.com> <200907172202.43824.mel.flynn%2Bfbsd.questions@mailing.thruhere.net> <24393ae80907180929x71d2cf1frb8f1c900bf79c46a@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[ Adding usb@ and keeping long context for that purpose ] On Saturday 18 July 2009 08:29:32 Andrey Shuvikov wrote: > On Sat, Jul 18, 2009 at 2:02 AM, Mel > > Flynn<mel.flynn+fbsd.questions@mailing.thruhere.net> wrote: > > On Friday 17 July 2009 18:59:49 Andrey Shuvikov wrote: > >> I'm trying to configure X and according to the manual enabled DBUS and > >> HALD. But when hald is starting up I get kernel panic: > >> > >> kmem_malloc: entry not found or misaligned > >> > >> Does anyone know what could be wrong? I have memory dump if it can > >> help but it's big (173M). > > > > If you have a file /var/crash/vmcore.0, you will want to run the > > following command: > > kgdb /boot/kernel/kernel /var/crash/vmcore.0 > > Then type bt at the prompt and paste output here. > > > > More info: > > <http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/ker > >neldebug.html> > > > > uname -a and dmesg output also help in diagnosing this problem. > > -- > > Mel > > The uname output is: > > FreeBSD foxtrot.home 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 > 08:49:13 UTC 2009 > root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 > > The kgdb output: > > GNU gdb 6.1.1 [FreeBSD] > Copyright 2004 Free Software Foundation, Inc. > GDB is free software, covered by the GNU General Public License, and you > are welcome to change it and/or distribute copies of it under certain > conditions. Type "show copying" to see the conditions. > There is absolutely no warranty for GDB. Type "show warranty" for details. > This GDB was configured as "i386-marcel-freebsd"... > > Unread portion of the kernel message buffer: > panic: kmem_malloc: entry not found or misaligned > cpuid = 0 > Uptime: 52s > Physical memory: 2034 MB > Dumping 176 MB: 161 145 129 113 97 81 65 49 33 17 1 > > Reading symbols from /boot/kernel/linux.ko...Reading symbols from > /boot/kernel/linux.ko.symbols...done. > done. > Loaded symbols for /boot/kernel/linux.ko > #0 doadump () at pcpu.h:196 > 196 pcpu.h: No such file or directory. > in pcpu.h > (kgdb) bt > #0 doadump () at pcpu.h:196 > #1 0xc07e25a7 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:418 > #2 0xc07e2879 in panic (fmt=Variable "fmt" is not available. > ) at /usr/src/sys/kern/kern_shutdown.c:574 > #3 0xc0a1cdc0 in kmem_malloc (map=0xc147108c, size=0, flags=2) > at /usr/src/sys/vm/vm_kern.c:381 > #4 0xc0a13357 in page_alloc (zone=0x0, bytes=0, pflag=0xe7b6497f "\002", > wait=2) at /usr/src/sys/vm/uma_core.c:952 > #5 0xc0a15e20 in uma_large_malloc (size=0, wait=2) > at /usr/src/sys/vm/uma_core.c:2706 > #6 0xc07d16f8 in malloc (size=0, mtp=0xc0c46580, flags=2) ^^^^^^ > at /usr/src/sys/kern/kern_malloc.c:393 > #7 0xc0743044 in uhidopen (dev=0xc5713000, flag=1, mode=8192, > p=0xc5c6a460) at /usr/src/sys/dev/usb/uhid.c:428 In kgdb can you print the entire softcell as follows: f 7 p *sc Hopefully that will provide sufficient information for the usb developers to fix this problem. > #8 0xc07a56a0 in giant_open (dev=0xc5713000, oflags=1, devtype=8192, > td=0xc5c6a460) at /usr/src/sys/kern/kern_conf.c:332 > #9 0xc076e1fc in devfs_open (ap=0xe7b64a88) > at /usr/src/sys/fs/devfs/devfs_vnops.c:908 > #10 0xc0af88d2 in VOP_OPEN_APV (vop=0xc0c47ee0, a=0xe7b64a88) > at vnode_if.c:371 > #11 0xc0870829 in vn_open_cred (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0, > cred=0xc5470100, fp=0xc5b57da8) at vnode_if.h:199 > #12 0xc0870973 in vn_open (ndp=0xe7b64b7c, flagp=0xe7b64c78, cmode=0, > fp=0xc5b57da8) at /usr/src/sys/kern/vfs_vnops.c:94 > #13 0xc086e0a3 in kern_open (td=0xc5c6a460, > path=0xbfbfe90c <Address 0xbfbfe90c out of bounds>, > pathseg=UIO_USERSPACE, flags=1, mode=0) > at /usr/src/sys/kern/vfs_syscalls.c:1042 > #14 0xc086e610 in open (td=0xc5c6a460, uap=0xe7b64cfc) > at /usr/src/sys/kern/vfs_syscalls.c:1009 > #15 0xc0ae4495 in syscall (frame=0xe7b64d38) > at /usr/src/sys/i386/i386/trap.c:1090 > #16 0xc0ac9260 in Xint0x80_syscall () > at /usr/src/sys/i386/i386/exception.s:255 > #17 0x00000033 in ?? () > Previous frame inner to this frame (corrupt stack?) > (kgdb) q > > The dmesg: > > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 > root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2999.67-MHz 686-class > CPU) Origin = "GenuineIntel" Id = 0x10676 Stepping = 6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC >A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PD >CM,SSE4.1> AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > real memory = 2146893824 (2047 MB) > avail memory = 2091225088 (1994 MB) > ACPI APIC Table: <A_M_I_ OEMAPIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <A_M_I_ OEMRSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, 7ff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem > 0xd0000000-0xdfffffff,0xfe8e0000-0xfe8effff irq 16 at device 0.0 on > pci1 > pci1: <multimedia, HDA> at device 0.1 (no driver attached) > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at > device 26.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at > device 26.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at > device 26.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff > irq 18 at device 26.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 > uhub3: 6 ports with 6 removable, self powered > umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on > uhub3 pci0: <multimedia, HDA> at device 27.0 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci4: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci3: <ACPI PCI bus> on pcib3 > atapci0: <Marvell 88SX6121 UDMA133 controller> port > 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f > mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci3 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 > pci2: <ACPI PCI bus> on pcib4 > ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f > mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci2 > ale0: 960 Tx FIFO, 1024 Rx FIFO > ale0: Using 1 MSI messages. > miibus0: <MII bus> on ale0 > atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 > atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, > auto ale0: Ethernet address: 00:22:15:5a:67:e8 > ale0: [FILTER] > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at > device 29.0 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 > uhub4: 2 ports with 2 removable, self powered > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at > device 29.1 on pci0 > uhci4: [GIANT-LOCKED] > uhci4: [ITHREAD] > usb5: <UHCI (generic) USB controller> on uhci4 > usb5: USB revision 1.0 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 > uhub5: 2 ports with 2 removable, self powered > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at > device 29.2 on pci0 > uhci5: [GIANT-LOCKED] > uhci5: [ITHREAD] > usb6: <UHCI (generic) USB controller> on uhci5 > usb6: USB revision 1.0 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 > uhub6: 2 ports with 2 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff800-0xfe7ffbff > irq 23 at device 29.7 on pci0 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > usb7: EHCI version 1.0 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1 > usb7: USB revision 2.0 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 > uhub7: 6 ports with 6 removable, self powered > ugen0: <Microsoft Microsoft LifeCam VX-5000, class 239/2, rev > 2.00/1.00, addr 2> on uhub7 > pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > fwohci0: <Lucent FW322/323> mem 0xfebff000-0xfebfffff irq 19 at device > 3.0 on pci5 > fwohci0: [FILTER] > fwohci0: OHCI version 1.0 (ROM=1) > fwohci0: No. of Isochronous channels is 8. > fwohci0: EUI64 00:1e:8c:00:01:63:47:d0 > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:1e:8c:63:47:d0 > fwe0: Ethernet address: 02:1e:8c:63:47:d0 > fwip0: <IP over FireWire> on firewire0 > fwip0: Firewire address: 00:1e:8c:00:01:63:47:d0 @ 0xfffe00000000, > S400, maxrec 2048 > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > dcons_crom0: <dcons configuration ROM> on firewire0 > dcons_crom0: bus_addr 0x12e4000 > fwohci0: Initiate bus reset > fwohci0: BUS reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH10 SATA300 controller> port > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x940 >0-0x940f irq 19 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata3: <ATA channel 0> on atapci1 > ata3: [ITHREAD] > ata4: <ATA channel 1> on atapci1 > ata4: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atapci2: <Intel ICH10 SATA300 controller> port > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa40 >0-0xa40f irq 19 at device 31.5 on pci0 > atapci2: [ITHREAD] > ata5: <ATA channel 0> on atapci2 > ata5: [ITHREAD] > ata6: <ATA channel 1> on atapci2 > ata6: [ITHREAD] > acpi_button0: <Power Button> on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq > 2 on acpi0 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 sio0: type 16550A > sio0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model IntelliMouse, device ID 3 > cpu0: <ACPI CPU> on acpi0 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - EE, > should be E5 [20070320] > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 618092006000920 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xd0000-0xd27ff pnpid ORM0000 on isa0 > ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 > ata0: [ITHREAD] > ata1 at port 0x170-0x177,0x376 irq 15 on isa0 > ata1: [ITHREAD] > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > uhid0: <Yealink Network Technology Ltd. VOIP USB Phone, class 0/0, rev > 1.01/0.00, addr 2> on uhub5 > Timecounters tick every 1.000 msec > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > acd0: DVDR <PLEXTOR DVDR PX-712A/1.04> at ata2-master UDMA33 > ad6: 152627MB <WDC WD1600JS-00SGB0 20.06C03> at ata3-master SATA300 > ad8: 305245MB <WDC WD3200AAKS-00VYA0 12.01B02> at ata4-master SATA300 > GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS. > GEOM_LABEL: Label for provider ad8s1 is ntfs/New Volume. > GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc. > GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0. > GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33. > GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f. > GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e. > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0 > (probe0:umass-sim0:0:0:0): Medium not present > (probe0:umass-sim0:0:0:0): Unretryable error > (probe0:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0 > (probe0:umass-sim0:0:0:1): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:1): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0 > (probe0:umass-sim0:0:0:1): Medium not present > (probe0:umass-sim0:0:0:1): Unretryable error > (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0 > (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0 > (probe0:umass-sim0:0:0:2): Medium not present > (probe0:umass-sim0:0:0:2): Unretryable error > (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0 > (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0 > (probe0:umass-sim0:0:0:3): Medium not present > (probe0:umass-sim0:0:0:3): Unretryable error > SMP: AP CPU #1 Launched! > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device > da0: 40.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > da1 at umass-sim0 bus 0 target 0 lun 1 > da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: NOT READY, Medium not present > da2 at umass-sim0 bus 0 target 0 lun 2 > da2: <Generic USB xD/SM Reader 1.02> Removable Direct Access SCSI-0 device > da2: 40.000MB/s transfers > da2: Attempt to query device size failed: NOT READY, Medium not present > da3 at umass-sim0 bus 0 target 0 lun 3 > da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device > da3: 40.000MB/s transfers > da3: Attempt to query device size failed: NOT READY, Medium not present > Trying to mount root from ufs:/dev/ad6s3a > GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed. > GEOM_LABEL: Label for provider ad6s3a is ufsid/4a5a61fa90383ccc. > GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed. > GEOM_LABEL: Label for provider ad6s3g is ufsid/4a5a61fa4e22975e. > GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed. > GEOM_LABEL: Label for provider ad6s3e is ufsid/4a5a61fa5b9a9e33. > GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed. > GEOM_LABEL: Label for provider ad6s3f is ufsid/4a5a61fb3ef7459f. > GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed. > GEOM_LABEL: Label for provider ad6s3d is ufsid/4a5a61fc87a6c3a0. > GEOM_LABEL: Label ufsid/4a5a61fa90383ccc removed. > GEOM_LABEL: Label ufsid/4a5a61fa4e22975e removed. > GEOM_LABEL: Label ufsid/4a5a61fa5b9a9e33 removed. > GEOM_LABEL: Label ufsid/4a5a61fb3ef7459f removed. > GEOM_LABEL: Label ufsid/4a5a61fc87a6c3a0 removed. > GEOM_LABEL: Label msdosfs/FREEDOS removed. > GEOM_LABEL: Label for provider ad6s1 is msdosfs/FREEDOS. > GEOM_LABEL: Label msdosfs/FREEDOS removed. > > Thanks, > Andrey -- Mel
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200907181029.00939.mel.flynn%2Bfbsd.questions>