Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 16 Dec 2009 21:38:50 +0300
From:      jackal <me@jackal.in>
To:        Hans Petter Selasky <hselasky@c2i.net>, freebsd-usb@freebsd.org
Subject:   Re: logitech vx nano mouse buttons
Message-ID:  <200912162138.51219.me@jackal.in>
In-Reply-To: <200912161844.23094.hselasky@c2i.net>
References:  <200912161556.52923.me@jackal.in> <200912161844.23094.hselasky@c2i.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello,

On Wednesday 16 December 2009 20:44:21 you wrote:
> On Wednesday 16 December 2009 13:56:52 jackal wrote:
> > Hello,
> >
> > I'm using logitech vx nano mouse at freebsd 8-stable.
> > Everything works fine, except wheel left/right buttons.
> > `cat /dev/ums0' doesn't show anything when pressing this buttons. Any
> > other buttons works fine, including navigation buttons.
> > Is there a way to get this buttons work?
> 
> Hi,
> 
> What is the output from dmesg?
> 
> We would need the HID descriptor for your USB mouse.
> 
> There should be some examples if you search the freebsd-usb archive on
>  dumping the HID descriptor using usbconfig.
> 
> --HPS
> 

ugen0.2: <Logitech> at usbus0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 2> on usbus0
ums0: 16 buttons and [XYZ] coordinates ID=0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/5.00, addr 2> on usbus0

dell# usbconfig -u 0 -a 2 list
ugen0.2: <USB Receiver Logitech> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON

dell# usbconfig -u 0 -a 2 do_request 0x81 0x06 0x2200 0 0x100
REQUEST = <0x05 0x01 0x09 0x02 0xa1 0x01 0x09 0x01 0xa1 0x00 0x05 0x09 0x19 0x01 0x29 0x10 0x15 0x00 0x25 0x01 0x95 0x10 0x75 0x01 0x81 0x02 
0x05 0x01 0x16 0x01 0x80 0x26 0xff 0x7f 0x75 0x10 0x95 0x02 0x09 0x30 0x09 0x31 0x81 0x06 0x15 0x81 0x25 0x7f 0x75 0x08 0x95 0x01 0x09 0x38 
0x81 0x06 0x05 0x0c 0x0a 0x38 0x02 0x95 0x01 0x81 0x06 0xc0 0xc0><)%u&u01%u88>

dell# usbconfig -u 0 -a 2 do_request 0x81 0x06 0x2200 1 0x100
REQUEST = <0x05 0x0c 0x09 0x01 0xa1 0x01 0x85 0x03 0x75 0x10 0x95 0x02 0x15 0x01 0x26 0x8c 0x02 0x19 0x01 0x2a 0x8c 0x02 0x81 0x00 0xc0 0x06 
0x00 0xff 0x09 0x01 0xa1 0x01 0x85 0x10 0x75 0x08 0x95 0x06 0x15 0x00 0x26 0xff 0x00 0x09 0x01 0x81 0x00 0x09 0x01 0x91 0x00 0xc0 0x06 0x00 
0xff 0x09 0x02 0xa1 0x01 0x85 0x11 0x75 0x08 0x95 0x13 0x15 0x00 0x26 0xff 0x00 0x09 0x02 0x81 0x00 0x09 0x02 0x91 0x00 0xc0><u&*u&u&>

I hope, usbconfig commands are correct.

-- 
Kind regards, Eugeny.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200912162138.51219.me>