Date: Thu, 18 Nov 1999 14:11:45 -0700 From: "Dewey, Michael" <mdewey@uswest.com> To: freebsd-questions@FreeBSD.ORG, "'Jonathan E. Lyons'" <parrothd@midwest.net> Subject: RE: Terminal mode in ppp Message-ID: <690C7049A180D11194BD00805F6F2CE003BEB15F@denex03.uswmedia.com>
next in thread | raw e-mail | index | archive | help
It is a generic PCMCIA 56K modem (not a winmodem) on IO_COM2 and irq 3. My dmesg looks like: sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0x200 sio1: at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A Thanks, Mike > ---------- > From: Jonathan E. Lyons > Sent: Thursday, November 18, 1999 12:57 PM > To: Dewey, Michael; Dewey, Michael; freebsd-questions@FreeBSD.ORG > Subject: RE: Terminal mode in ppp > > What type of modem is it, internal/external/PNP/Brand? And what COM port, > I/O and IRQ is it on? What does dmesg say,(More below) > > 10:01am@parrothd~>dmesg > Copyright (c) 1992-1999 FreeBSD Inc. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 3.2-RELEASE #0: Sun Nov 7 19:30:16 CST 1999 > parrothd@parrothd.midwest.net:/usr/src/sys/compile/PARROTHD.COM > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 46906677 Hz > CPU: Pentium/P5 (46.91-MHz 586-class CPU) > Origin = "GenuineIntel" Id = 0x517 Stepping=7 > Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> > real memory = 41943040 (40960K bytes) > avail memory = 37429248 (36552K bytes) > Preloaded elf kernel "kernel" at 0xc035d000. > Probing for devices on PCI bus 0: > chip0: <Intel 82434LX (Mercury) PCI cache memory controller> rev 0x03 on > pci0.0.0 > wdc0: <CMD 640B IDE> rev 0x02 int a irq 14 on pci0.1.0 > chip1: <Intel 82378ZB PCI to ISA bridge> rev 0x03 on pci0.2.0 > vga0: <Cirrus Logic GD5434 SVGA controller> rev 0x8e int a irq 10 on > pci0.3.0 > ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 11 on > pci0.12.0 > ed1: address 00:40:05:49:3a:00, type NE2000 (16 bit) > Probing for PnP devices: > Probing for devices on the ISA bus: > sc0 on isa > sc0: VGA color <16 virtual consoles, flags=0x0> > ed0 not found at 0x280 > fe0 not found at 0x300 > atkbdc0 at 0x60-0x6f on motherboard > atkbd0 irq 1 on isa > psm0 not found > sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > sio0: type 16550A > > You should have something like this if your modem is on COM1, post what > the > results of dmesg are. > > > > > At 01:40 PM 11/18/99 -0700, Dewey, Michael wrote: > >I'm pretty sure that I am using the right COM port (I've tried most of > the > >other ones as well just to make sure). I get the following when I type > show > >modem: > > > >Name: deflink > > State: open, no carrier > > Device: /dev/cuaa1 > > Link Type: interactive > > Connect Count: 1 > > Physical outq: 0 > > Queued Packets: 0 > > Phone Number: N/A > > > >Defaults: > > Device List: /dev/cuaa1 > > Characteristics: 38400bps, cs8, no parity, CTS/RTS on > > > > Jonathan E. Lyons > parrothd@midwest.net Nucleus Consulting > ICQ # 14226912 www.nucleusconsulting.com > Cell # 773-251-1967 A+, MCSE, CCNA, FreeBSD! > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?690C7049A180D11194BD00805F6F2CE003BEB15F>