Date: Sat, 22 Feb 2003 11:43:01 -0500 From: "Paul A. Howes" <freebsd-current@fair-ware.com> To: <freebsd-current@FreeBSD.org> Subject: cc: Internal error: Illegal instruction (program as) Message-ID: <001c01c2da91$782551e0$0200a8c0@howesnet>
next in thread | raw e-mail | index | archive | help
All,
I am receiving some strange errors during a buildworld of 5.0-RELEASE-p2
from 5.0-RELEASE-p1. The location of where the failure varies, but the
program that causes the failure is the same every time: "as".
The errors are a variety of signal 10 and signal 4. I do find an
"as.core" file under /usr/obj, but as is stripped, so there are no
debugging symbols or listing that I can provide.
The strange thing is that I have been able to successfully build
XFree86, KDE, and many other ports on this system. I followed the
4.x-to-5.0 upgrade directions to the letter about a month ago, and have
had no major problems before this.
Any help would be greatly appreciated!
--
Paul A. Howes
========
Hardware
Tyan S2099GNNR motherboard
Intel P4-2.4/533
Crucial 512 MB PC2100 DIMM
Maxtor 20 GB hard drive.
========
dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.0-RELEASE-p1 #2: Thu Feb 13 08:39:59 EST 2003
root@fairware.cjb.net:/usr/obj/usr/src-5.0/sys/HYDROGEN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0470000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04700a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04700f8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2430010060 Hz
CPU: Pentium 4 (2430.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 536805376 (511 MB)
avail memory = 516771840 (492 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
VESA: v2.0, 8128k memory, flags:0x0, mode table:0xc03b34a2 (1000022)
VESA: ATI MACH64
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE31
Using $PIR table, 11 entries at 0xc00fdeb0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at
device 0.0 o
n pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f
irq 12 at
device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd000-0xd01f
irq 5 at d
evice 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd400-0xd41f
irq 11 at
device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 1.0 (no driver attached)
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xc400-0xc4ff mem
0xe6042000-0xe604
2fff irq 11 at device 4.0 on pci2
aic7880: Ultra Single Channel A, SCSI Id=6, 16/253 SCBs
pci2: <network, ethernet> at device 8.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.7> port
0xcc00-0xcc3f
mem 0xe6020000-0xe603ffff,0xe6000000-0xe601ffff irq 12 at device 10.0 on
pci2
em0: Speed:100 Mbps Duplex:Full
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0
x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem
0xd1000-0xd27ff,0xd0000-0xd07ff,0xc8000-0xcffff,0xc
0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled,
default to den
y, logging disabled
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 19541MB <Maxtor 92041U4> [39703/16/63] at ata0-master UDMA66
ad1: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-slave UDMA100
acd0: CDROM <FX001DE> at ata1-slave PIO3
Waiting 2 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <EXABYTE EXB-85058SQANXR1 07R0> Removable Sequential Access SCSI-2
device
sa0: 5.000MB/s transfers (5.000MHz, offset 11)
Mounting root from ufs:/dev/ad0s1a
fxp0: <Intel Pro/100 Ethernet> port 0xc800-0xc83f mem
0xe6040000-0xe6040fff irq
10 at device 8.0 on pci2
fxp0: Ethernet address 00:e0:81:50:23:90
inphy0: <i82562EM 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pid 82687 (as), uid 0: exited on signal 10 (core dumped)
pid 9837 (as), uid 0: exited on signal 4 (core dumped)
pid 35827 (as), uid 0: exited on signal 10 (core dumped)
pid 51404 (as), uid 0: exited on signal 4 (core dumped)
========
/etc/make.conf
CFLAGS= -O -pipe
COPTFLAGS= -O -pipe
NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically
NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS
automatically
NO_FORTRAN= true # do not build g77 and related libraries
NO_I4B= true # do not build isdn4bsd package
NO_IPFILTER= true # do not build IP Filter package
NO_MAILWRAPPER= true # do not build the mailwrapper(8) MTA selector
NO_OBJC= true # do not build Objective C support
NOGAMES= true # do not build games (games/ subdir)
NOPROFILE= true # Avoid compiling profiled libraries
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001c01c2da91$782551e0$0200a8c0>