Date: Wed, 23 Jan 2019 10:01:55 +0100 From: Emmanuel Vadot <manu@bidouilliste.com> To: ticso@cicely.de Cc: Bernd Walter <ticso@cicely7.cicely.de>, freebsd-arm@freebsd.org Subject: Re: Orange Pi PC2 Message-ID: <20190123100155.c6d57db7dfadeb7d1267f2b2@bidouilliste.com> In-Reply-To: <20190123002029.GE7489@cicely7.cicely.de> References: <20190122193138.GC7489@cicely7.cicely.de> <20190123000830.5535bdf611827e00559ca4b9@bidouilliste.com> <20190123002029.GE7489@cicely7.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 23 Jan 2019 01:20:29 +0100 Bernd Walter <ticso@cicely7.cicely.de> wrote: > On Wed, Jan 23, 2019 at 12:08:30AM +0100, Emmanuel Vadot wrote: > > On Tue, 22 Jan 2019 20:31:38 +0100 > > Bernd Walter <ticso@cicely7.cicely.de> wrote: > > > > > After some investigation on how SD card images are setup, I did the > > > following: > > > dd if=FreeBSD-12.0-RELEASE-arm64-aarch64-PINE64-LTS.img of=/dev/da0 bs=1m > > > [72]cicely7# pwd > > > /usr/local/share/u-boot/u-boot-orangepi-pc2 > > > [71]cicely7# dd if=u-boot-sunxi-with-spl.bin of=/dev/da0 bs=1k seek=8 conv=sync > > > 644+1 records in > > > 645+0 records out > > > 660480 bytes transferred in 1.393002 secs (474141 bytes/sec) > > > > > > The system booted fine with that. > > > Some warnings however: > > > Loading DTB overlays: 'sun50i-a64-sid,sun50i-a64-ths,sun50i-a64-timer' > > > /boot/dtb/overlays/sun50i-a64-sid.dtbo size=0x1fd > > > /boot/dtb/overlays/sun50i-a64-ths.dtbo size=0x3e8 > > > /boot/dtb/overlays/sun50i-a64-timer.dtbo size=0x175 > > > DTB overlay '/boot/dtb/overlays/sun50i-a64-sid.dtbo' not compatible > > > DTB overlay '/boot/dtb/overlays/sun50i-a64-ths.dtbo' not compatible > > > DTB overlay '/boot/dtb/overlays/sun50i-a64-timer.dtbo' not compatible > > > EHCI failed to shut down host controller. > > > EHCI failed to shut down host controller. > > > EHCI failed to shut down host controller. > > > > > > > > > I'm a bit irritated that the PINE64-LTS image is somewhat a generic one > > > in that it uses a GENERIC kernel and also contains dtb files for other > > > boards, > > > > So you are irritated that you have some weird behavior when you use > > something that is not specifically made for one board and you try it on > > it ??? > > No, that is perfectly fine, just that we have more or less GENERIC images, > which arn't announced as such. > > There are more confusing things I've noticed. > The PINE64-LTS uses u-boot-sopine, although the u-boot repository has a config > specificly for the PINE64-LTS. This is new in 2019.01, I need to update our u-boot and create a new port for the LTS. > There is a u-boot for OrangePI Plus 2e, but none for the OrangePI Plus 2. > Also the u-bbot git misses a config for the OrangePI Plus 2, but I assume > those boards are identical for the OS as the difference only seem to be that > the Plus 2 has an USB hub and a USB-SATA bridge. > The WiFi chip on the 2 is a smaller package, but both are Realtek RTL8189. > The amount of available Allwinner based boards on the market is irritating > all by itself... > > > All arm64 board that are supported by FreeBSD uses GENERIC > > kernel and have dtb for every boards supported (more or less). > > > > > but there isn't a GENERICSD as it is for 32bit arm. > > > > Yes, I will create one at some point, the reason I didn't do it is > > that someone found out recently that Allwinner 64bits SoC can use GPT > > partitions so I will need to do test with this. > > Oh - good to know. > Still have to find out about ZFS root. > > > > Just booted the board with GBit ethernet link and it only takes 50mA, which > > > is amazing low. > > > Not exact measurement with a 10mA resolution USB measurement plug, so it > > > might be a bit off. > > > > > > Is there anything special to consider for zfsroot? > > > Found some online info on how to setup an ARM64 cloud server with zroot. > > > I'm aware that the board only has 1GB RAM, but I'm still tempted to give it > > > a try. > > -- > B.Walter <bernd@bwct.de> http://www.bwct.de > Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm. -- Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20190123100155.c6d57db7dfadeb7d1267f2b2>