Date: Wed, 6 Jan 2010 20:50:09 GMT From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@FreeBSD.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload Message-ID: <201001062050.o06Ko92J076669@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR usb/142387; it has been noted by GNATS. From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org Cc: Andrew <andrew@flarn.com>, freebsd-gnats-submit@freebsd.org Subject: Re: usb/142387: Netgear WPN111 not recognised by uath(4) after uathload Date: Wed, 6 Jan 2010 21:43:56 +0100 On Wednesday 06 January 2010 21:26:03 Andrew wrote: > >Number: 142387 > >Category: usb > >Synopsis: Netgear WPN111 not recognised by uath(4) after uathload > >Confidential: no > >Severity: non-critical > >Priority: low > >Responsible: freebsd-usb > >State: open > >Quarter: > >Keywords: > >Date-Required: > >Class: sw-bug > >Submitter-Id: current-users > >Arrival-Date: Wed Jan 06 20:30:06 UTC 2010 > >Closed-Date: > >Last-Modified: > >Originator: Andrew > >Release: 8-STABLE > >Organization: > >Environment: > > FreeBSD XXXXXX 8.0-STABLE FreeBSD 8.0-STABLE #2: Tue Jan 5 21:34:37 GMT > 2010 root@XXXXXX:/usr/obj/usr/src/sys/GENERIC amd64 > > >Description: > > After running uathload the device changes from: > ugen3.2: <WPN111 Atheros Communications Inc> at usbus3, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x00ff > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x1385 > idProduct = 0x5f01 > bcdDevice = 0x0001 > iManufacturer = 0x0001 <Atheros Communications Inc> > iProduct = 0x0002 <WPN111> > iSerialNumber = 0x0003 <1.0> > bNumConfigurations = 0x0001 > to: > ugen3.2: <WPN111 Atheros Communications Inc> at usbus3, cfg=0 md=HOST > spd=HIGH (480Mbps) pwr=ON > > bLength = 0x0012 > bDescriptorType = 0x0001 > bcdUSB = 0x0200 > bDeviceClass = 0x00ff > bDeviceSubClass = 0x0000 > bDeviceProtocol = 0x0000 > bMaxPacketSize0 = 0x0040 > idVendor = 0x1385 > idProduct = 0x5f02 > bcdDevice = 0x0001 > iManufacturer = 0x0001 <Atheros Communications Inc> > iProduct = 0x0002 <WPN111> > iSerialNumber = 0x0003 <1.0> > bNumConfigurations = 0x0001 > > Note: idProduct 0x5f01 -> 0x5f02 rather than 0x5f00 > > >How-To-Repeat: > > Connect a Netgear WPN111, run uathload -d /dev/ugenX.X > > >Fix: > > Correct sys/dev/usb/usbdevs product id for WPN111 with firmware, patch > attached. > > uath now attachs: > > dmesg: > ugen3.2: <Atheros Communications Inc> at usbus3 (disconnected) > ugen3.2: <Atheros Communications Inc> at usbus3 > uath0: <Atheros Communications Inc WPN111, rev 2.00/0.01, addr 2> on usbus3 > > > ifconfig uath0 > uath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 > ether 00:14:6c:ea:81:a4 > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > > > Patch attached with submission follows: > > --- usbdevs.orig 2010-01-06 20:15:02.000000000 +0000 > +++ usbdevs 2010-01-05 21:28:03.000000000 +0000 > @@ -2005,8 +2005,8 @@ > product NETGEAR2 MA101B 0x4102 MA101 Rev B > product NETGEAR3 WG111T 0x4250 WG111T > product NETGEAR3 WG111T_NF 0x4251 WG111T (no firmware) > -product NETGEAR3 WPN111 0x5f00 WPN111 > product NETGEAR3 WPN111_NF 0x5f01 WPN111 (no firmware) > +product NETGEAR3 WPN111 0x5f02 WPN111 > > /* Nikon products */ > product NIKON E990 0x0102 Digital Camera E990 > > >Release-Note: > >Audit-Trail: > >Unformatted: Hi, Are you certain that product "0x5f00" is incorrect and that we shouldn't add the new product, 0x5f02 instead? --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201001062050.o06Ko92J076669>