From owner-freebsd-scsi@FreeBSD.ORG  Thu Jun 23 21:15:30 2011
Return-Path: <owner-freebsd-scsi@FreeBSD.ORG>
Delivered-To: scsi@freebsd.org
Received: from mx1.freebsd.org (unknown [IPv6:2001:4f8:fff6::34])
	by hub.freebsd.org (Postfix) with ESMTP id E2B5D1065672;
	Thu, 23 Jun 2011 21:15:30 +0000 (UTC)
	(envelope-from joe@gracenpeace.net)
Received: from shorty.gracenpeace.net (shorty.gracenpeace.net [209.181.242.73])
	by mx1.freebsd.org (Postfix) with ESMTP id BC7868FC19;
	Thu, 23 Jun 2011 21:15:30 +0000 (UTC)
Received: from [127.0.0.1] (mail.holidaycompanies.com [209.98.45.253])
	by shorty.gracenpeace.net (Postfix) with ESMTP id 0C7C3439012;
	Thu, 23 Jun 2011 14:41:54 -0500 (CDT)
Message-ID: <4E03A647.5070501@gracenpeace.net>
Date: Thu, 23 Jun 2011 15:47:03 -0500
From: Joe in MPLS <joe@gracenpeace.net>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US;
	rv:1.9.2.18) Gecko/20110616 Thunderbird/3.1.11
MIME-Version: 1.0
To: scsi@freebsd.org, stable@freebsd.org
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Cc: 
Subject: LTO3 tape drive not detected
X-BeenThere: freebsd-scsi@freebsd.org
X-Mailman-Version: 2.1.5
Precedence: list
List-Id: SCSI subsystem <freebsd-scsi.freebsd.org>
List-Unsubscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-scsi>,
	<mailto:freebsd-scsi-request@freebsd.org?subject=unsubscribe>
List-Archive: <http://lists.freebsd.org/pipermail/freebsd-scsi>
List-Post: <mailto:freebsd-scsi@freebsd.org>
List-Help: <mailto:freebsd-scsi-request@freebsd.org?subject=help>
List-Subscribe: <http://lists.freebsd.org/mailman/listinfo/freebsd-scsi>,
	<mailto:freebsd-scsi-request@freebsd.org?subject=subscribe>
X-List-Received-Date: Thu, 23 Jun 2011 21:15:31 -0000

This was originally posted on the freebsd-questions list. It was 
suggested that I post it here:

I have FreeBSD 8.2-RELEASE running on an HP DL360 G5. I recently added 
an (HP branded) LSI Logic single channel SCSI 320 card and attached an 
HP Ultrium 920 LTO3 tape drive.

The system sees the SCSI controller as mpt0, and it seems to know 
there's something at SCSI ID 4, but I get an "AutoSense Failed" for 
hba/id/lun 0:4:0 at boot and subsequent camcontrol rescans.

I checked the supported hardware doc for the release but it doesn't get 
very specific about tape drives. This is my first experience with LTO3 
tape. I was hoping that I'd automagically get a /dev/sa0 device like I 
always did with my old DLT drives but it wasn't to be this time.

Is there a way to make this drive work?