Date: Thu, 23 May 2002 13:54:31 -0700 (PDT) From: Peter Van Epp <vanepp@sfu.ca> To: questions@FreeBSD.org Subject: keyboard problem on Tyan S2468NG motherboard Message-ID: <200205232054.NAA00871@fraser.sfu.ca>
next in thread | raw e-mail | index | archive | help
I have a Tyan Thunder K7X S2468NG mother board with dual 1.6 Gig
Athelons. I see from the archive (and the lack of apparant response) that
it isn't a suprise that SMP doesn't work (or at least it also didn't work
for someone else that tried it), but I also appear to have a keyboard problem.
The console tends to update keyboard characters slowly most of the time and
sometimes lose keystrokes entirely. RedHat 7.3 doesn't appear to be having
this problem so it doesn't look to be hardware. While I will probably end up
running RedHat on the boxes (for other support reasons) I am interested in
if possible benchmarking with FreeBSD (there are a couple of Sysconnect GIG E
cards in each of two boxes) against Linux. If FreeBSD doesn't want to run
that won't be possible. Anybody know of a solution to either or both problems?
Output from dmesg from the machine:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Fri Oct 1 20:38:43 PDT 1999
root@test5.ucs.sfu.ca:/usr/src/sys/compile/MP
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) MP 1900+ (1600.07-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory = 536346624 (523776K bytes)
config> di pcic0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 517087232 (504968K bytes)
Preloaded elf kernel "kernel" at 0xc049a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc049a09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 14 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip1: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
skc0: <SysKonnect Gigabit Ethernet> port 0x1000-0x10ff mem 0xf4000000-0xf4003fff irq 10 at device 8.0 on pci0
skc0: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9843 SX
sk0: <XaQti Corp. XMAC II> on skc0
sk0: Ethernet address: 00:00:5a:9a:27:7c
miibus0: <MII bus> on sk0
xmphy0: <XaQti Corp. XMAC II gigabit interface> on miibus0
xmphy0: 1000baseSX, 1000baseSX-FDX, auto
skc1: <SysKonnect Gigabit Ethernet> port 0x1400-0x14ff mem 0xf4004000-0xf4007fff irq 9 at device 9.0 on pci0
skc1: SysKonnect SK-NET Gigabit Ethernet Adapter SK-9843 SX
sk1: <XaQti Corp. XMAC II> on skc1
sk1: Ethernet address: 00:00:5a:9a:27:a0
miibus1: <MII bus> on sk1
xmphy1: <XaQti Corp. XMAC II gigabit interface> on miibus1
xmphy1: 1000baseSX, 1000baseSX-FDX, auto
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xf4100000-0xf4100fff irq 10 at device 0.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pci2: <ATI Mach64-GR graphics accelerator> at 7.0
xl0: <3Com 3c980C Fast Etherlink XL> port 0x2400-0x247f mem 0xf4102000-0xf410207f irq 11 at device 8.0 on pci2
xl0: Ethernet address: 00:e0:81:20:c3:50
miibus2: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c980C Fast Etherlink XL> port 0x2480-0x24ff mem 0xf4102400-0xf410247f irq 5 at device 9.0 on pci2
xl1: Ethernet address: 00:e0:81:20:c3:51
miibus3: <MII bus> on xl1
ukphy1: <Generic IEEE 802.3u media interface> on miibus3
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc8fff,0xdc000-0xdffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19092MB <WDC WD200BB-00CXA0> [38792/16/63] at ata0-master BIOSDMA
acd0: CDROM <CD-ROM 52X/AKH> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
Peter Van Epp / Operations and Technical Support
Simon Fraser University, Burnaby, B.C. Canada
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200205232054.NAA00871>