Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 3 Jan 2006 11:26:50 -0800
From:      "Anton Zavrin" <anton@atoyf.com>
To:        "John Baldwin" <jhb@freebsd.org>, <freebsd-hardware@freebsd.org>
Subject:   RE: Hardware is compatible with FreeBSD 4.x but fails on FreeBSD 6.x
Message-ID:  <A2DE6AC6670EB945B0459EF320D39E594A85@dune.exch.local>
References:  <A2DE6AC6670EB945B0459EF320D39E5936F2@dune.exch.local> <200601031257.26813.jhb@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Yes, i will try today!
=20
Not sure how to though, but i will try :)

________________________________

From: John Baldwin [mailto:jhb@freebsd.org]
Sent: Tue 1/3/2006 9:57 AM
To: freebsd-hardware@freebsd.org
Cc: Anton Zavrin
Subject: Re: Hardware is compatible with FreeBSD 4.x but fails on =
FreeBSD 6.x



On Saturday 31 December 2005 04:32 pm, Anton Zavrin wrote:
> Hello,
>
>
>
> Can someone provide some input on such phenomena.
>
>
>
> I tried to install FreeBSD 6.0 on the same computer that is currently
> running FreeBSD 4.10, but when I try to wipe existing harddrive clean =
it
> says no HDDs found, also, advising me to check if my HDD controller is
> supported or something in that spirit.
>
>
>
> This is from dmesg on that PC:
>
> atapci0: <VIA 8235 ATA133 controller> port 0xfc00-0xfc0f at device =
17.1
> on pci0
>
> ata0: at 0x1f0 irq 14 on atapci0
>
> ata1: at 0x170 irq 15 on atapci0
>
>
>
> I checked FreeBSD hardware notes for 6.0 and didn't see any references
> for this controller. Does it mean I must change my motherboard to
> install 6.0 or/and up?

Is there anyway that you could capture the dmesg from the 6.0 boot =
perhaps
using a serial console?

--
John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =3D  http://www.FreeBSD.org





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A2DE6AC6670EB945B0459EF320D39E594A85>