Date: Sun, 12 Nov 2006 16:58:28 +0200 From: "ANdrei" <lists@hausro.de> To: <regnier.olivier@gmail.com> Cc: freebsd-hardware@freebsd.org Subject: Re: Slimtype DVDRW SOSw-833S/VRS2 ATA/ATAPI Message-ID: <033101c7066b$0436b530$847ba8c0@Rage> References: <4556566A.5010505@gmail.com> <021601c705fd$61f3f070$847ba8c0@Rage> <455718B7.3000009@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
i thought you have an issue with _all_ types of CDs, hence my suggestion. I am pretty sure that if you just can't listen to audio CDs (but data CDs work) it's not a _hardware_ issue, and this would not be the proper list for it (but I might be wrong, as I don't use audio so much :) nevertheless, I don't normally use audio CDs (last time looong ago) so I don't have any other ideas on the spot... maybe it would be usefull anyway to tell us if you can properly use data CDs/DVDs, so at least other issues are ruled out... and sorry for the misleading first answer, seems I didn't get the idea right away ;) good luck, ANdrei http://students.oamk.fi/~t6ruan00/ ------ Never argue with an idiot. They drag you down to their level then beat you with experience... ----- Original Message ----- From: "Olivier Régnier" <regnier.olivier@gmail.com> To: "ANdrei" <lists@hausro.de>; <freebsd-hardware@freebsd.org> Sent: Sunday, November 12, 2006 2:51 PM Subject: Re: Slimtype DVDRW SOSw-833S/VRS2 ATA/ATAPI > ANdrei a écrit : >> hi. >> >> i don't want to sound like a smartass, but did u try to use it as root? >> also, can u mount data cd's? that should give you a start as to know if >> your drive is supported, and I actually doubt it that there is _any_ >> unsupported normal drive, as FreeBSD doesn't care about the exact type >> of drive, but about the type: Atapi, SCSI etc... And if you can mount a >> data cd as root, it means you just do smtg wrong (we can get through >> this tomorrow or later and figure that out, let's just start by seeing >> if data cds work :) btw, if data cd works, try listening to an audio cd >> as root, and if that works too (pretty sure it will) then smtg is wrong >> with the permissions ;) >> >> >> good luck, >> ANdrei >> http://students.oamk.fi/~t6ruan00/ >> ------ >> Never argue with an idiot. They drag you down >> to their level then beat you with experience... >> >> >> ----- Original Message ----- From: "Olivier Régnier" >> <regnier.olivier@gmail.com> >> To: <freebsd-hardware@freebsd.org> >> Sent: Sunday, November 12, 2006 1:02 AM >> Subject: Slimtype DVDRW SOSw-833S/VRS2 ATA/ATAPI >> >> >>> Hello, >>> >>> I'm running on FreeBSD 6.1-RELEASE-p10 and i would like to listen a >>> music cd, to look a dvd film or to burn a cd data but i can't do that. >>> The material is new. Here some information about it: >>> >>> - Acer Aspire 3002WLMI >>> - Mobile AMD Sempron processor 2800+ >>> - 15.4 WXGA wide TFT LCD >>> - 60GB HDD >>> - DVD-Dual (Support DVD+R Double Layer/DVD+RW) >>> - 512MB DDR >>> - 802.11b/g wireless LAN >>> >>> To use my DVD/CD burner, i compiled my kernel with these parameters: >>> >>> # --------------- >>> # Kernel. >>> # --------------- >>> >>> # Options >>> options CD9660 # ISO 9660 Filesystem >>> >>> # ATA and ATAPI devices >>> device atapicd # ATAPI CDROM drives >>> >>> # SCSI peripherals >>> device scbus # SCSI bus (required for SCSI) >>> device da # Direct Access (disks) >>> >>> # ATAPI/CAM >>> device atapicam >>> >>> if you looks the dmesg file, i obtain these lines: >>> >>> acd0: DVDR <Slimtype DVDRW SOSW-833S/VRS2> at ata1-master UDMA33 >>> acd0: FAILURE - PREVENT_ALLOW timed out >>> acd0: FAILURE - PREVENT_ALLOW timed out >>> acd0: FAILURE - READ_SUBCHANNEL timed out >>> acd0: FAILURE - PAUSE ILLEGAL REQUEST asc=0xb9 ascq=0x00 >>> >>> Well, after i activated the dma for the dvd/cd burner with this line in >>> my loader.conf: >>> >>> hw.ata.atapi_dma="1" >>> >>> After the new kernel is installed, and the system is rebooted, i >>> modified my devfs.conf file >>> with the good permissions, i think: >>> >>> own xpt0 olivier >>> perm xpt0 0660 >>> >>> own acd0 olivier >>> perm acd0 0660 >>> >>> link acd0 cdrom >>> link acd0 dvd >>> >>> then, i tested my dvd/cd burner with xmms. I push on the play button, >>> the cdrom engages and after 1 second, more nothing. Second test, i used >>> mplayer to look my dvd film and nothing. I don't know what happened >>> with it. >>> Perhaps FreeBSD doesn't support my Slimtype DVDRW ? But if i use the >>> atacontrol list command, i have this: >>> >>> ATA channel 1: >>> Master: acd0 <Slimtype DVDRW SOSW-833S/VRS2> ATA/ATAPI revision 5 >>> Slave: no device present >>> >>> It is terrible, when you cannot use your material. With Microsoft >>> Windows, I do not have any problem and on the same laptop. Estranged no >>> ? But i want to stay on FreeBSD to find a solution. My situation is >>> delicate. >>> >>> Could you help me about this ? >>> >>> Thank you very much. >>> >>> Olivier Regnier. >>> >> >> >> -------------------------------------------------------------------------------- >> >> >> >>> Copyright (c) 1992-2006 The FreeBSD Project. >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >>> The Regents of the University of California. All rights reserved. >>> FreeBSD 6.1-RELEASE-p10 #3: Sat Nov 11 23:23:51 UTC 2006 >>> root@elipse:/usr/src/sys/i386/compile/ORION >>> ACPI APIC Table: <PTLTD APIC > >>> Timecounter "i8254" frequency 1193182 Hz quality 0 >>> CPU: Mobile AMD Sempron(tm) Processor 2800+ (1600.06-MHz 686-class CPU) >>> Origin = "AuthenticAMD" Id = 0x10fc0 Stepping = 0 >>> >>> Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> >>> >>> AMD Features=0xc2500800<SYSCALL,NX,MMX+,FFXSR,3DNow+,3DNow> >>> AMD Features2=0x1<LAHF> >>> real memory = 468647936 (446 MB) >>> avail memory = 449200128 (428 MB) >>> ACPI-0377: *** Info: Table [SSDT] replaced by host OS >>> ACPI: overriding DSDT/SSDT with custom table >>> ACPI-0377: *** Info: Table [DSDT] replaced by host OS >>> MADT: Forcing active-low polarity and level trigger for SCI >>> ioapic0 <Version 1.1> irqs 0-23 on motherboard >>> wlan: mac acl policy registered >>> acpi0: <PTLTD RSDT> on motherboard >>> acpi0: Power Button (fixed) >>> unknown: I/O range not supported >>> acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0 >>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 >>> cpu0: <ACPI CPU> on acpi0 >>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >>> pci0: <ACPI PCI bus> on pcib0 >>> agp0: <SiS 760 host to AGP bridge> mem 0xe0000000-0xe1ffffff at device >>> 0.0 on pci0 >>> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >>> pci1: <ACPI PCI bus> on pcib1 >>> pci1: <display, VGA> at device 0.0 (no driver attached) >>> isab0: <PCI-ISA bridge> at device 2.0 on pci0 >>> isa0: <ISA bus> on isab0 >>> atapci0: <SiS 962/963 UDMA133 controller> port >>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 2.5 on pci0 >>> ata0: <ATA channel 0> on atapci0 >>> ata1: <ATA channel 1> on atapci0 >>> pci0: <simple comms, generic modem> at device 2.6 (no driver attached) >>> pcm0: <SiS 7012> port 0x1400-0x14ff,0x1c80-0x1cff irq 18 at device 2.7 >>> on pci0 >>> pcm0: <Avance Logic ALC203 AC97 Codec> >>> ohci0: <SiS 5571 USB controller> mem 0xe2002000-0xe2002fff irq 20 at >>> device 3.0 on pci0 >>> ohci0: [GIANT-LOCKED] >>> usb0: OHCI version 1.0, legacy support >>> usb0: SMM does not respond, resetting >>> usb0: <SiS 5571 USB controller> on ohci0 >>> usb0: USB revision 1.0 >>> uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>> uhub0: 3 ports with 3 removable, self powered >>> ohci1: <SiS 5571 USB controller> mem 0xe2003000-0xe2003fff irq 21 at >>> device 3.1 on pci0 >>> ohci1: [GIANT-LOCKED] >>> usb1: OHCI version 1.0, legacy support >>> usb1: SMM does not respond, resetting >>> usb1: <SiS 5571 USB controller> on ohci1 >>> usb1: USB revision 1.0 >>> uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>> uhub1: 3 ports with 3 removable, self powered >>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe2004000-0xe2004fff >>> irq 23 at device 3.2 on pci0 >>> ehci0: [GIANT-LOCKED] >>> usb2: EHCI version 1.0 >>> usb2: companion controllers, 3 ports each: usb0 usb1 >>> usb2: <EHCI (generic) USB 2.0 controller> on ehci0 >>> usb2: USB revision 2.0 >>> uhub2: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >>> uhub2: 6 ports with 6 removable, self powered >>> sis0: <SiS 900 10/100BaseTX> port 0x1800-0x18ff mem >>> 0xe2005000-0xe2005fff irq 19 at device 4.0 on pci0 >>> miibus0: <MII bus> on sis0 >>> rlphy0: <RTL8201L 10/100 media interface> on miibus0 >>> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >>> sis0: Ethernet address: 00:c0:9f:a4:d2:f0 >>> cbb0: <TI1410 PCI-CardBus Bridge> at device 6.0 on pci0 >>> cardbus0: <CardBus bus> on cbb0 >>> pccard0: <16-bit PCCard bus> on cbb0 >>> ndis0: <Broadcom 802.11g Network Adapter> mem 0xe2000000-0xe2001fff >>> irq 17 at device 11.0 on pci0 >>> ndis0: NDIS API version: 5.1 >>> ndis0: Ethernet address: 00:0e:9b:d3:b5:7e >>> acpi_acad0: <AC Adapter> on acpi0 >>> battery0: <ACPI Control Method Battery> on acpi0 >>> acpi_lid0: <Control Method Lid Switch> on acpi0 >>> acpi_button0: <Power Button> on acpi0 >>> acpi_button1: <Sleep Button> on acpi0 >>> acpi_tz0: <Thermal Zone> on acpi0 >>> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >>> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >>> kbd0 at atkbd0 >>> atkbd0: [GIANT-LOCKED] >>> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >>> psm0: [GIANT-LOCKED] >>> psm0: model Synaptics Touchpad, device ID 0 >>> pmtimer0 on isa0 >>> orm0: <ISA Option ROMs> at iomem >>> 0xc0000-0xcbfff,0xcc000-0xd5fff,0xdc000-0xe3fff on isa0 >>> sc0: <System console> at flags 0x100 on isa0 >>> sc0: VGA <16 virtual consoles, flags=0x300> >>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >>> isa0 >>> ums0: vendor 0x1241 product 0x1177, rev 1.10/2.00, addr 2, iclass 3/1 >>> ums0: 3 buttons and Z dir. >>> Timecounter "TSC" frequency 1600064936 Hz quality 800 >>> Timecounters tick every 1.000 msec >>> ad0: 57231MB <IC25N060ATMR04 0 MO3OAD4A> at ata0-master UDMA100 >>> acd0: DVDR <Slimtype DVDRW SOSW-833S/VRS2> at ata1-master UDMA33 >>> acd0: FAILURE - PREVENT_ALLOW timed out >>> acd0: FAILURE - PREVENT_ALLOW timed out >>> Trying to mount root from ufs:/dev/ad0s2a >>> acd0: FAILURE - READ_SUBCHANNEL timed out >>> acd0: FAILURE - PAUSE ILLEGAL REQUEST asc=0xb9 ascq=0x00 >>> >> >> >> -------------------------------------------------------------------------------- >> >> >> >>> _______________________________________________ >>> freebsd-hardware@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware >>> To unsubscribe, send any mail to >>> "freebsd-hardware-unsubscribe@freebsd.org" >> >> > > Hello, > > logically, you don't need to mount your music cd with xmms. It is > necessary to configure the xmms plugin and tat all. I tested with the > root user but i have the same problem. Have you others suggestions ? > > Thank you so much :) > _______________________________________________ > freebsd-hardware@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-hardware > To unsubscribe, send any mail to > "freebsd-hardware-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?033101c7066b$0436b530$847ba8c0>