Date: Tue, 9 May 2017 11:52:27 +0100 From: Mike Wolman <mike@wolman.co.uk> To: Mori Hiroki <yamori813@yahoo.co.jp>, "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: onion omega2+ Message-ID: <a15eb4b0-018b-b135-3f83-e825b3687e08@wolman.co.uk> In-Reply-To: <651873.78746.qm@web101702.mail.ssk.yahoo.co.jp> References: <694efc3a-e183-35a1-a0bf-9a9c0d708826@wolman.co.uk> <CAJ1Oi8G%2BvTMBX4Ey=H=2WruXDjXjcyte5_n8T3VDdL=h8m7%2BVw@mail.gmail.com> <e92bc818-485f-d9fc-da2b-776bae2b0916@wolman.co.uk> <410144.69078.qm@web101716.mail.ssk.yahoo.co.jp> <fda8b792-f6c4-d0fb-5a99-d190cc3a4f39@wolman.co.uk> <128807.28836.qm@web101715.mail.ssk.yahoo.co.jp> <2d555385-8258-fd75-e4a3-a1e59bf86314@wolman.co.uk> <651873.78746.qm@web101702.mail.ssk.yahoo.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Sure: Omega2 # printenv bootcmd=tftp bootdelay=5 baudrate=115200 ethaddr="00:AA:BB:CC:DD:10" ipaddr=192.168.8.8 serverip=192.168.8.1 stdin=serial stdout=serial stderr=serial Environment size: 150/4092 bytes I dont think there is a problem with the serial stuff Mike. On 09/05/2017 05:03, Mori Hiroki wrote: > Hi Mike > > Could you show u-boot printenv command result. > > Thanks > > > ----- Original Message ----- >> From: Mike Wolman <mike@wolman.co.uk> >> To: Mori Hiroki <yamori813@yahoo.co.jp>; "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> >> Cc: >> Date: 2017/5/9, Tue 10:30 >> Subject: Re: onion omega2+ >> >> Hi Mori, >> >> When I compiled the world/kernel etc I used: >> >> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >> ../freebsd-wifi-build/build/bin/build ralink buildkernel >> >> I checked the serial stuff was the same as the other configs in: >> https://github.com/freebsd/freebsd-wifi-build/ >> and they looked the same. >> >> The OMEGA2.dtsi file has: >> >> chosen { >> bootargs = "console=ttyS0,115200"; >> }; >> >> >> And mt7628an.dtsi has: serial0 = &uartlite; >> >> I dont think im getting as far as worrying about the serial console at >> the moment and need to get the kernel to uncompress first. >> >> Mike. >> >> >> On 09/05/2017 02:20, Mori Hiroki wrote: >>> Hi Mike >>> >>> In FreeBSD is use serial0 dts item to console. >>> >>> I think good to use this at start. >>> >>> freebsd/sys/gnu/dts/mips/MT7628.dts >>> >>> ----- Original Message ----- >>>> From: Mike Wolman <mike@wolman.co.uk> >>>> To: Mori Hiroki <yamori813@yahoo.co.jp>; >> "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> >>>> Cc: >>>> Date: 2017/5/9, Tue 09:25 >>>> Subject: Re: onion omega2+ >>>> >>>> Hi Mori, >>>> >>>> I grabbed the dts files from: >>>> >>>> https://github.com/WereCatf/source/tree/image/target/linux/ramips/dts >>>> >> https://github.com/WereCatf/source/blob/image/target/linux/ramips/dts/OMEGA2P.dts >> https://github.com/WereCatf/source/blob/image/target/linux/ramips/dts/OMEGA2.dtsi >>>> If this is of any use from the default linux install on the flash: >>>> >>>> root@Omega-12BF:/proc# cat /proc/mtd >>>> dev: size erasesize name >>>> mtd0: 00030000 00010000 "u-boot" >>>> mtd1: 00010000 00010000 "u-boot-env" >>>> mtd2: 00010000 00010000 "factory" >>>> mtd3: 01fb0000 00010000 "firmware" >>>> mtd4: 00148842 00010000 "kernel" >>>> mtd5: 01e677be 00010000 "rootfs" >>>> mtd6: 01950000 00010000 "rootfs_data" >>>> >>>> >>>> btw after posting i spotted and error in what i did with: >>>> >>>> mkimage -A mips -O linux -T kernel -C lzma \ >>>> -a 0x80001000 -e 0x80001100 \ >>>> -n "FreeBSD" -d kernel.MT7628_FDT.lzma >>>> kernel.MT7628_FDT.ulzma.uImage >>>> >>>> I have redone this using the correct compressed kernel ie: >>>> >>>> mkimage -A mips -O linux -T kernel -C lzma \ >>>> -a 0x80001000 -e 0x80001100 \ >>>> -n "FreeBSD" -d kernel.MT7628_FDT.ulzma >>>> kernel.MT7628_FDT.ulzma.uImage >>>> >>>> >>>> But this didnt work. >>>> >>>> >>>> >>>> On 09/05/2017 01:17, Mori Hiroki wrote: >>>>> Hi. >>>>> >>>>> I think if U-Boot work memory make broken then >>>>> Uncompressing Kernel Image is NG. >>>>> >>>>> Some ARM U-Boot is use top address in work memory. >>>>> If this case your kernel start address to move to >>>>> after work memory. But I never see in MIPS. >>>>> >>>>> And What is set FDT_DTS_FILE in your kernel configuration ? >>>>> >>>>> ----- Original Message ----- >>>>> >>>>>> From: Mike Wolman <mike@wolman.co.uk> >>>>>> To: freebsd-mips@freebsd.org >>>>>> Cc: >>>>>> Date: 2017/5/9, Tue 07:48 >>>>>> Subject: Re: onion omega2+ >>>>>> >>>>>> >>>>>> More info in case anyone can point me in the right direction. >>>>>> >>>>>> I have found: >>>>>> >>>>>> https://forum.openwrt.org/viewtopic.php?id=53865 >>>>>> >>>>>> I have tried changing how lzma compresses the kernel by >> adding -d20 to >>>>>> the build scripts eg: >>>>>> >>>>>> /usr/local/bin/lzma e >>>>>> >> /home/mike/omega2/src/../root/mipsel_ap/boot/kernel.MT7628_FDT/kernel >>>> \ >>>>>> /home/mike/omega2/src/../tftpboot/kernel.MT7628_FDT.lzma -d20 >>>>>> >>>>>> This did not work. >>>>>> >>>>>> >>>>>> Looking at the onion omega conf I see that it uses mkuzip and >> not lzma >>>>>> with the following settings: >>>>>> >>>>>> X_FSIMAGE_CMD="mkuzip" >>>>>> X_FSIMAGE_ARGS="-L -d -s 65536 -v" >>>>>> X_FSIMAGE_SUFFIX=".ulzma" >>>>>> >>>>>> So tried the following: >>>>>> >>>>>> mkuzip -L -d -s 65536 -v -o kernel.MT7628_FDT.ulzma >> kernel.MT7628_FDT >>>>>> mkimage -A mips -O linux -T kernel -C lzma \ >>>>>> -a 0x80001000 -e 0x80001100 \ >>>>>> -n "FreeBSD" -d kernel.MT7628_FDT.lzma >>>>>> kernel.MT7628_FDT.ulzma.uImage >>>>>> >>>>>> >>>>>> But this did not work either. >>>>>> >>>>>> >>>>>> >>>>>> On 08/05/2017 19:41, Aleksandr Rybalko wrote: >>>>>>> Hi Mike! >>>>>>> >>>>>>> I see you have no "OK" after >> "Uncompressing Kernel >>>> Image >>>>>> ...", so >>>>>>> first point uboot decompressor fail. >>>>>>> Why fail? Because you have wrong base address in image: >>>>>>> Load Address: fffffff2 >>>>>>> Entry Point: fffffff2 >>>>>>> MIPS32 machines have RAM mapped to 0x80000000 address, >> so adding >>>> its >>>>>>> size, you will get max address (if 16MB, it will be >> 0x81000000), >>>> but >>>>>>> you uboot image was created with 0xfffffff2. >>>>>>> >>>>>>> Even more, unpacked kernel expects it will be called at >>>> 0x80001100. so >>>>>>> if you have ELF kernel (file with ELF header, like >> every >>>> executable) >>>>>>> that file have to be loaded at (0x80001100 - >> ELF_HEADER_SIZE). >>>>>>> In most cases it will be 0x80001100 - 0x100 = >> 0x80001000. But >>>> sometime >>>>>>> (I did not found why) it can be 0x20, you can find it >> by looking >>>> at >>>>>>> .text section in readelf -S. >>>>>>> >>>>>>> So if you have kernel with entry point 0x80001100 and >> .text >>>> segment >>>>>>> offset 0x100, you have to create uboot image with load >> address >>>>>>> 0x80001000 and entry point 0x80001100. >>>>>>> >>>>>>> If that step successful you will get: >>>>>>> /Uncompressing Kernel Image/ ... OK >>>>>>> Starting kernel ... >>>>>>> >>>>>>> Last line mean, uboot did jump into kernel code. >>>>>>> >>>>>>> Good luck. >>>>>>> >>>>>>> 2017-05-07 18:20 GMT+03:00 Mike Wolman >> <mike@wolman.co.uk >>>>>>> <mailto:mike@wolman.co.uk>>: >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I am trying to get FreeBSD working on this board - >> I think I >>>> am >>>>>>> almost there in getting it working but need some >> help please. >>>>>>> I have followed instructions from the >> freebsd-wifi-build and >>>>>>> *think* I have got everything correct - I am trying >> to do >>>> this on >>>>>>> a CURRENT setup: >>>>>>> >>>>>>> FreeBSD f64-current.mw.office 12.0-CURRENT FreeBSD >>>> 12.0-CURRENT #0 >>>>>>> r317887: Sun May 7 03:20:34 UTC 2017 >>>>>>> >>>> mike@f64-current.mw.office:/usr/obj/usr/src/sys/GENERIC-NODEBUG amd64 >>>>>>> $ cat ~/.freebsd-wifi-build-settings.cfg >>>>>>> X_SKIP_MORE_STUFF=YES >>>>>>> X_EXTRA_SRC_CONF=~/omega2/src.conf >>>>>>> >>>>>>> $ cat ~/omega2/src.conf >>>>>>> WITHOUT_CLANG=YES >>>>>>> WITHOUT_CLANG_FULL=YES >>>>>>> >>>>>>> get dts files from thread >>>>>>> >> http://community.onion.io/topic/1099/openwrt-on-the-omega-2/8 >>>>>>> >>>> <http://community.onion.io/topic/1099/openwrt-on-the-omega-2/8>; >>>>>>> cd ~/omega2/src/sys/gnu/dts/mips >>>>>>> fetch >>>>>>> >> https://raw.githubusercontent.com/WereCatf/source/image/target/linux/ramips/dts/OMEGA2.dtsi >>>>>>> >> <https://raw.githubusercontent.com/WereCatf/source/image/target/linux/ramips/dts/OMEGA2.dtsi>; >>>>>>> fetch >>>>>>> >> https://raw.githubusercontent.com/WereCatf/source/image/target/linux/ramips/dts/OMEGA2.dts >>>>>>> >> <https://raw.githubusercontent.com/WereCatf/source/image/target/linux/ramips/dts/OMEGA2.dts>; >>>>>>> fetch >>>>>>> >> https://raw.githubusercontent.com/WereCatf/source/image/target/linux/ramips/dts/OMEGA2P.dts >>>>>>> >> <https://raw.githubusercontent.com/WereCatf/source/image/target/linux/ramips/dts/OMEGA2P.dts>; >>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>>>> ../freebsd-wifi-build/build/bin/build ralink >> buildworld >>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>>>> ../freebsd-wifi-build/build/bin/build ralink >> buildkernel >>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>>>> ../freebsd-wifi-build/build/bin/build ralink >> installworld >>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>>>> ../freebsd-wifi-build/build/bin/build ralink >> installkernel >>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>>>> ../freebsd-wifi-build/build/bin/build ralink >> distribution >>>>>>> >>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>>>> ../freebsd-wifi-build/build/bin/build ralink >> mfsroot >>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>>>> ../freebsd-wifi-build/build/bin/build ralink >> fsimage >>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT >>>>>>> ../freebsd-wifi-build/build/bin/build ralink uboot >>>>>>> >>>>>>> >>>>>>> Create flash: >>>>>>> >>>>>>> X_FLASH=kernel.MT7628_FDT.lzma.flash >>>>>>> dd if=/dev/zero bs=$(( 0x200000 )) count=1 >> of=${X_FLASH} >>>>>>> dd if=kernel.MT7628_FDT.lzma.uImage of=${X_FLASH} >>>> conv=notrunc >>>>>>> dd if= mfsroot-ralink.img.lzma >> ${X_FLASH} >>>>>>> >>>>>>> >>>>>>> $ readelf -h kernel.MT7628_FDT | grep Entry >>>>>>> Entry point address: 0x80001100 >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> Now on the omega over serial - I didnt get the >> network >>>> expansion >>>>>>> doc thing so am doing stuff with usb rather than >> tftp >>>>>>> I am not 100% sure about the 0x80001100 and the >> fatload and >>>> have >>>>>>> tried this >>>>>>> >>>>>>> Omega2 # fatload usb 0:1 0x80001100 >>>> /kernel.MT7628_FDT.lzma.flash >>>>>>> * >>>>>>> * >>>>>>> Reading file >> "/kernel.MT7628_FDT.lzma.flash" >>>>>>> * >>>>>>> ** >>>>>>> ** >>>>>>> ** >>>>>>> ****** >>>>>>> >> ********************************************************************************************************************************************* >>>>>>> ****** >>>>>>> * >>>>>>> FAT: 2108463 Bytes read >>>>>>> Omega2 # bootm 0x80001100 >>>>>>> ## Booting image at 80001100 ... >>>>>>> Image Name: FreeBSD >>>>>>> Image Type: MIPS Linux Kernel Image (lzma >> compressed) >>>>>>> Data Size: 1365122 Bytes = 1.3 MB >>>>>>> Load Address: fffffff2 >>>>>>> Entry Point: fffffff2 >>>>>>> Verifying Checksum ... OK >>>>>>> Uncompressing Kernel Image ... >>>>>>> >>>>>>> >>>>>>> At this point nothing happens and console hangs - >> note in >>>>>>> OMEGA2.dtsithe console is set to ttyS0: >>>>>>> >>>>>>> bootargs = "console=ttyS0,115200"; >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> I have also tried with just kernel.MT7628_FDT and >>>>>>> kernel.MT7628_FDT.lzma but both fail: >>>>>>> >>>>>>> Omega2 # fatload usb 0:1 0x80001100 >>>> /kernel.MT7628_FDT.lzma.uImage >>>>>>> * >>>>>>> * >>>>>>> Reading file >> "/kernel.MT7628_FDT.lzma.uImage" >>>>>>> * >>>>>>> ** >>>>>>> ** >>>>>>> ****** >>>>>>> >> ****************************************************************************************************************************** >>>>>>> ********** >>>>>>> * >>>>>>> FAT: 1365186 Bytes read >>>>>>> Omega2 # bootm 0x80001100 >>>>>>> ## Booting image at 80001100 ... >>>>>>> Image Name: FreeBSD >>>>>>> Image Type: MIPS Linux Kernel Image (lzma >> compressed) >>>>>>> Data Size: 1365122 Bytes = 1.3 MB >>>>>>> Load Address: fffffff2 >>>>>>> Entry Point: fffffff2 >>>>>>> Verifying Checksum ... OK >>>>>>> Uncompressing Kernel Image ... >>>>>>> >>>>>>> >>>>>>> A few comments on the hardware for anyone who wants >> to get >>>> one: >>>>>>> Get the expansion dock with serial port access - >> the power >>>> dock >>>>>>> does not provide serial access - i think it is >> possible to >>>> use an >>>>>>> ftdi ttl serial chip/cable but have not tried. >>>>>>> >>>>>>> Stupidly I forgot this only has wifi access so you >> are not >>>> able to >>>>>>> tftp boot this without getting the ethernet network >> expansion >>>> but >>>>>>> loading stuff up from a usb memory stick is seem >> fine from >>>> u-boot. >>>>>>> I do not think that it is possible to boot from the >> SD card >>>> on the >>>>>>> Omega2+ - which is a shame. >>>>>>> >>>>>>> Thanks for reading, >>>>>>> >>>>>>> Mike. >>>>>>> >>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> freebsd-mips@freebsd.org >>>> <mailto:freebsd-mips@freebsd.org>mailing >>>>>> list >>>>>>> >> https://lists.freebsd.org/mailman/listinfo/freebsd-mips >>>>>>> >>>> <https://lists.freebsd.org/mailman/listinfo/freebsd-mips>; >>>>>>> To unsubscribe, send any mail to >>>>>>> "freebsd-mips-unsubscribe@freebsd.org >>>>>>> >> <mailto:freebsd-mips-unsubscribe@freebsd.org>" >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> WBW >>>>>>> ------- >>>>>>> Rybalko Aleksandr <ray@ddteam.net >>>> <mailto:ray@ddteam.net>> >>>>>> _______________________________________________ >>>>>> freebsd-mips@freebsd.org mailing list >>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips >>>>>> To unsubscribe, send any mail to >>>>>> "freebsd-mips-unsubscribe@freebsd.org" >>>>>>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a15eb4b0-018b-b135-3f83-e825b3687e08>