Date: 09 Nov 2004 17:34:33 -0500 From: Lowell Gilbert <freebsd-questions-local@be-well.ilk.org> To: <admin@unixdaemon.org> Cc: freebsd-questions@freebsd.org Subject: Re: 5.3 Release CD ROM Time out Issues Message-ID: <44zn1qps7a.fsf@be-well.ilk.org> In-Reply-To: <0MKz1m-1CQhUw00e5-0003LI@mrelay.perfora.net> References: <0MKz1m-1CQhUw00e5-0003LI@mrelay.perfora.net>
next in thread | previous in thread | raw e-mail | index | archive | help
<admin@unixdaemon.org> writes: > I have a fresh install of 5.3 Release my dvd burner drive conitunes to > timeout and yes the drive is set as slave...heres my dmesg > > acd0: DVDROM <JLMS DVD-ROM LTD-166S/DS08> at ata1-master UDMA33 > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - MODE_SENSE_BIG timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - MODE_SENSE_BIG timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - MODE_SENSE_BIG timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - MODE_SENSE_BIG timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - MODE_SENSE_BIG timed out > acd1: CDROM <TDK DVDRW420N/1.39> at ata1-slave UDMA33 > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - TEST_UNIT_READY timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - PREVENT_ALLOW timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - TEST_UNIT_READY timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - TEST_UNIT_READY timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - PREVENT_ALLOW timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - TEST_UNIT_READY timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - PREVENT_ALLOW timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - TEST_UNIT_READY timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - TEST_UNIT_READY timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - PREVENT_ALLOW timed out > acd0: DMA limited to UDMA33, non-ATA66 cable or device > acd1: FAILURE - TEST_UNIT_READY timed out > > > It goes on for awhile before booting its TDK 420NBurner has been working > perfectly since 5.x with no errors. The hardware is fine sometimes the > machine boots without errors but thats a rarity, so i am not sure why > exactly its behaving this way. Sounds like a marginal drive cable (or possibly controller or the drive itself, but much more likely the cable)...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44zn1qps7a.fsf>