Date: Sat, 6 Jan 2001 18:56:02 -0000 From: "Andy Chantrill" <andy@chantrill.freeserve.co.uk> To: <hm@hcs.de> Cc: <isdn@freebsd.org> Subject: Re: Help Message-ID: <002a01c07812$694d9350$01010a0a@DEDICATIONINET.local> References: <20010106185401.3951038F@hcswork.hcs.de>
next in thread | previous in thread | raw e-mail | index | archive | help
I changed the card to a different slot (seeing as I can't assign irqs in BIOS). Grepping "irq" out of the bootlog yields the following: -- IOAPIC #0 intpin 2 -> irq 0 sym0: <875> port 0x7000-0x70ff mem 0x40100000-0x40100fff,0x40101000-0x401010ff irq 5 at device 4.0 on pci1 isic0: <AVM Fritz!Card PCI> port 0x6000-0x601f mem 0x40000000-0x4000001f irq 10 at device 10.0 on pci0 tl0: <Compaq NetFlex-3/P Integrated> port 0x6020-0x602f mem 0x40000020-0x4000002f irq 9 at device 16.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio1 at port 0x2f8-0x2ff irq 3 on isa0 -- Thanks, Andy. ----- Original Message ----- From: "Hellmuth Michaelis" <hm@hcs.de> To: "Andy Chantrill" <andy@chantrill.freeserve.co.uk> Cc: <isdn@freebsd.org> Sent: Saturday, January 06, 2001 6:54 PM Subject: Re: Help > From the keyboard of Andy Chantrill: > > > i4b-L1-timer3_expired: state = F5 Identifying Input > > i4b-L1-isic_recover: HSCX B: ISTA = 0x0 > > i4b-L1-isic_recover: ISAC: ISTA = 0x0 > > i4b-L1-isic_recover: HSCX B: IMASK = 0x0 > > i4b-L1-isic_recover: HSCX A: IMASK = 0x0 > > i4b-L1-isic_recover: ISAC: IMASK = 0x2a > > i4b-L2-i4b_T202_timeout: unit 0, M202 = 3 > > i4b-L1-ph_data_reg: still in state F3! > > i4b-L3-T303_timeout: SETUP not answered, cr = 43 > > i4b-L3-next_l3state: FSM illegal state, state = ST_OW - Out Wait EST, event > > = EV_T303EXP - T303 timeout! > > The interrupt which is generated by the card is not routed through to > the drivers interrupt service routine. > > I answered this question the last time you asked and i remember the > card was using irq 5. This irq may already be occupied by a printer port, > please check your BIOS settings. > > And finally, this is an FAQ, please check the i4b FAQ for hints how to > solve this problem and/or the FreeBSD isdn mailinglist archive. > > hellmuth > -- > Hellmuth Michaelis Tel +49 40 55 97 47-70 > HCS Hanseatischer Computerservice GmbH Fax +49 40 55 97 47-77 > Oldesloer Strasse 97-99 Mail hm [at] hcs.de > D-22457 Hamburg WWW http://www.hcs.de > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isdn" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002a01c07812$694d9350$01010a0a>