From owner-freebsd-questions Wed Nov 29 8:17:21 2000 Delivered-To: freebsd-questions@freebsd.org Received: from coltbe178.colt-telecom.be (colt-telecom.customer.BE.COLT.NET [212.35.96.130]) by hub.freebsd.org (Postfix) with ESMTP id 8CC0237B401; Wed, 29 Nov 2000 08:17:15 -0800 (PST) Received: from coltbeexch01.colt-telecom.be (unverified) by coltbe178.colt-telecom.be (Content Technologies SMTPRS 4.1.5) with ESMTP id ; Wed, 29 Nov 2000 17:23:20 +0100 Received: by coltbeexch01.colt-telecom.be with Internet Mail Service (5.5.2650.21) id ; Wed, 29 Nov 2000 17:15:46 +0100 Message-ID: From: Livens Wim To: "'freebsd-questions@freebsd.org'" Cc: "'bfenner@freebsd.org'" Subject: pcm: channel dead in 4.2-RELEASE Date: Wed, 29 Nov 2000 17:15:45 +0100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have the following error after playing one song, and no sound anymore: pcm1: play interrupt timeout, channel dead This is an out-of box 4.2-RELEASE (just pcm driver added) with a CS423x soundcard which worked fine on 3.3-RELEASE This has been reported often on the lists but afaik not after 4.2 was released. the suggested patch (uncommenting chn_dmaupdate(c);) was already done in 4.2-RELEASE. I commented it again, turned off PnP and all that, no luck. Any idea what I can do ? Thanks, ----- $FreeBSD: /c/ncvs/src/sys/dev/sound/pcm/channel.c,v 1.19.2.7 2000/10/14 20:59 :41 cg Exp $ void chn_checkunderflow(pcm_channel *c) { ... b->fl = b->bufsize - b->rl; b->underflow = 0; } else { chn_dmaupdate(c); } } Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #3: Tue Nov 28 00:47:13 CET 2000 root@rappe.livens.net:/usr/src/sys/compile/RAPPE Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (233.03-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf real memory = 67100672 (65528K bytes) avail memory = 61759488 (60312K bytes) Preloaded elf kernel "kernel" at 0xc0391000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at 7.2 irq 11 chip1: port 0x5000-0x500f at device 7.3 on pci0 pci0: at 9.0 xl0: <3Com 3c905-TX Fast Etherlink XL> port 0x6900-0x693f irq 12 at device 10.0 on pci0 xl0: Ethernet address: 00:60:08:13:36:e7 miibus0: on xl0 nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: port 0x6400-0x64ff mem 0xe1001000-0xe1001fff i rq 12 at device 11.0 on pci0 aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs bktr0: mem 0xe1002000-0xe1002fff irq 11 at device 12.0 on pci0 iicbb0: on bti2c0 iicbus0: on iicbb0 master-only smbus0: on bti2c0 bktr0: Hauppauge Model 61294 D129 bktr0: Hauppauge WinCast/TV, Philips PAL I tuner, remote control. pci0: (vendor=0x109e, dev=0x0878) at 12.1 irq 11 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 q 1 on atkbdc0 kbd0 at atkbd0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/1 bytes threshold plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 pcm1: at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on isa0 ep0: <3Com 3C509B-Combo EtherLink III (PnP)> at port 0x210-0x21f irq 10 on isa0 ep0: Ethernet address 00:20:af:4b:0e:25 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ata1-master: ata_command: timeout waiting for intr ata1-master: identify failed ad0: 2441MB [4960/16/63] at ata0-master WDMA2 ... da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) da1 at ahc0 bus 0 target 4 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da1: 2048MB (4194685 512 byte sectors: 255H 63S/T 261C) cd0 at ahc0 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: cd present [310128 x 2048 byte records] Mounting root from ufs:/dev/da0s1a uhci0: port 0x6a00-0x6a1f irq 11 at de vice 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered sio0: 1 more silo overflow (total 1) -- Wim Livens wlivens@colt-telecom.be Internet Engineer Tel: +32 2 790 1705 COLT Telecom Fax: +32 2 790 1711 Brussels To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message