Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Mar 2002 10:33:44 -0000
From:      "System Administrator" <sysadmin@st-james-snrgirls.w-london.sch.uk>
To:        "FreeBSD-questions" <freebsd-questions@freebsd.org>
Subject:   ADSL and UserPPP - ppp.log filled with disconnect messages
Message-ID:  <000701c1d57a$df37ff80$0a00000a@stjames.net>

next in thread | raw e-mail | index | archive | help
Hi

For the first time since establishing a working ADSL/router setup (PPPoE) under FreeBSD 4.5 and UserPPP, I have checked the
ppp.log file and was surprised to see it not just full of failure to connect messages, but clearly turning over every couple of
hours!

The Internet access for our school is routed through this ADSL link and has been running smoothly for the last 6 months. That
this email arrives at the mailing list indicates that our link continues to work fine...

A snippet of /var/log/ppp.log appears below:

Mar 27 10:32:30 sjrouter ppp[56]: tun0: Phase: deflink: Connected!
Mar 27 10:32:30 sjrouter ppp[56]: tun0: Phase: deflink: opening -> dial
Mar 27 10:32:30 sjrouter ppp[56]: tun0: Phase: deflink: dial -> carrier
Mar 27 10:32:35 sjrouter ppp[56]: tun0: Phase: deflink: Disconnected!
Mar 27 10:32:35 sjrouter ppp[56]: tun0: Phase: deflink: carrier -> hangup
Mar 27 10:32:35 sjrouter ppp[56]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Mar 27 10:32:35 sjrouter ppp[56]: tun0: Phase: deflink: : 0 packets in, 0 packets out
Mar 27 10:32:35 sjrouter ppp[56]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Wed Mar 27 10:32:35 2002
Mar 27 10:32:35 sjrouter ppp[56]: tun0: Phase: deflink: hangup -> opening
Mar 27 10:32:35 sjrouter ppp[56]: tun0: Phase: deflink: Enter pause (30) for redialing.
Mar 27 10:33:05 sjrouter ppp[56]: tun0: Phase: deflink: Connected!
Mar 27 10:33:05 sjrouter ppp[56]: tun0: Phase: deflink: opening -> dial
Mar 27 10:33:05 sjrouter ppp[56]: tun0: Phase: deflink: dial -> carrier
Mar 27 10:33:10 sjrouter ppp[56]: tun0: Phase: deflink: Disconnected!
Mar 27 10:33:10 sjrouter ppp[56]: tun0: Phase: deflink: carrier -> hangup
Mar 27 10:33:10 sjrouter ppp[56]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Mar 27 10:33:10 sjrouter ppp[56]: tun0: Phase: deflink: : 0 packets in, 0 packets out
Mar 27 10:33:10 sjrouter ppp[56]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Wed Mar 27 10:33:10 2002
Mar 27 10:33:10 sjrouter ppp[56]: tun0: Phase: deflink: hangup -> opening
Mar 27 10:33:10 sjrouter ppp[56]: tun0: Phase: deflink: Enter pause (30) for redialing.

The same sequence is repeated over and over, both in the current log file and the previous turned-over logs.

UserPPP is called with -ddial -nat and the conf file sets logging to Phase tun.

The ADSL router is connected via Ethernet (a second 'external' NIC)

What is going on here? Is there a problem, or not?

If you can shed some light on this matter, I'd be grateful to hear it!

Martyn Hill
ICT Teacher and IT Co-ordinator
St James Independent School
London


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000701c1d57a$df37ff80$0a00000a>