From owner-cvs-all@FreeBSD.ORG Wed Feb 15 21:53:02 2006 Return-Path: X-Original-To: cvs-all@freebsd.org Delivered-To: cvs-all@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E88AE16A420; Wed, 15 Feb 2006 21:53:01 +0000 (GMT) (envelope-from sepotvin@videotron.ca) Received: from tomts23-srv.bellnexxia.net (tomts23.bellnexxia.net [209.226.175.185]) by mx1.FreeBSD.org (Postfix) with ESMTP id 3022143D46; Wed, 15 Feb 2006 21:53:00 +0000 (GMT) (envelope-from sepotvin@videotron.ca) Received: from mail.telcobridges.com ([67.70.237.76]) by tomts23-srv.bellnexxia.net (InterMail vM.5.01.06.13 201-253-122-130-113-20050324) with ESMTP id <20060215215249.OQBY9224.tomts23-srv.bellnexxia.net@mail.telcobridges.com>; Wed, 15 Feb 2006 16:52:49 -0500 Received: from [10.0.0.130] ([10.0.0.130]) (authenticated bits=0) by mail.telcobridges.com (8.13.3/8.13.3) with ESMTP id k1FLqfPw050971 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT); Wed, 15 Feb 2006 16:52:43 -0500 (EST) (envelope-from sepotvin@videotron.ca) Message-ID: <43F3B0B7.4040408@videotron.ca> Date: Wed, 15 Feb 2006 16:52:39 -0600 From: "Stephane E. Potvin" User-Agent: Thunderbird 1.5 (X11/20060204) MIME-Version: 1.0 To: Matt Jacob References: <200602110135.k1B1ZTD0078022@repoman.freebsd.org> In-Reply-To: <200602110135.k1B1ZTD0078022@repoman.freebsd.org> Content-Type: multipart/mixed; boundary="------------090604070002010604080807" Cc: cvs-all@freebsd.org Subject: Re: cvs commit: src/sys/dev/mpt mpt.c mpt.h mpt_cam.c mpt_debug.c mpt_pci.c X-BeenThere: cvs-all@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: CVS commit messages for the entire tree List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 15 Feb 2006 21:53:02 -0000 This is a multi-part message in MIME format. --------------090604070002010604080807 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Hi Matt, I've tried the driver with a Sun Galaxy x4200. I'm running this on a single drive, no raid-0 or raid-1 enabled in the controller bios. I installed using an iso generated from sources fetched a few hours after this commit. The driver works well if I don't try to push it. As soon as I try to push it a little (checkout of ports tree or delete of ports tree), it start to generate the following errors: mpt0: Attempting to Abort Rex 0xffffffff80c49fd0 mpt0: Attempting to Abort Rex 0xffffffff80c49fd0 mpt0: Attempting to Abort Rex 0xffffffff80c49fd0 . . . on the console repetitively, with some mpt0: Requext 0xffffffff80c4xxxx Timed out. lines once in a while. (xxxx varies in this case). I'm trying to get a serial console hooked up on the system so I can enter ddb. (The system doesn't have a ps/2 port and using ddb with a usb keyboard doesn't seems to work). I'm attaching a verbose dmesg in case it helps. Is there anything I can provide/do you to help you diagnose this? Regards, Steph Matt Jacob wrote: > mjacob 2006-02-11 01:35:29 UTC > > FreeBSD src repository > > Modified files: > sys/dev/mpt mpt.c mpt.h mpt_cam.c mpt_debug.c > mpt_pci.c > Log: > Do initial cut of SAS HBA support. These controllers (106X) seem to support > automatically both SATA and SAS drives. The async SAS event handling we catch > but ignore at present (so automagic attach/detach isn't hooked up yet). > > Do 64 bit PCI support- we can now work on systems with > 4GB of memory. > > Do large transfer support- we now can support up to reported chain depth, or > the length of our request area. We simply allocate additional request elements > when we would run out of room for chain lists. > > Tested on Ultra320, FC and SAS controllers on AMD64 and i386 platforms. > There were no RAID cards available for me to regression test. > > The error recovery for this driver still is pretty bad. > > Revision Changes Path > 1.15 +114 -29 src/sys/dev/mpt/mpt.c > 1.10 +42 -32 src/sys/dev/mpt/mpt.h > 1.4 +283 -119 src/sys/dev/mpt/mpt_cam.c > 1.10 +59 -20 src/sys/dev/mpt/mpt_debug.c > 1.23 +91 -25 src/sys/dev/mpt/mpt_pci.c > _______________________________________________ > cvs-all@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/cvs-all > To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org" --------------090604070002010604080807 Content-Type: text/plain; name="dmesg.x4200.verbose" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.x4200.verbose" Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-20060211-SNAP #0: Sun Feb 12 08:19:17 UTC 2006 root@spotvin.telcobridges.com:/usr/obj/amd64/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Using 16 colors for the VM-PQ tuning (1024, 16) Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a5b000. ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193144 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2193767182 Hz CPU: Dual Core AMD Opteron(tm) Processor 275 (2193.77-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2 Features=0x178bfbff Features2=0x1 AMD Features=0xe2500800 AMD Features2=0x3 HTT bit cleared - FreeBSD does not have licensing issues requiring it. Cores per package: 2 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative usable memory = 8444366848 (8053 MB) Physical memory chunk(s): 0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages) 0x0000000000b5c000 - 0x00000000f7feffff, 4148772864 bytes (1012884 pages) 0x0000000100000000 - 0x00000001f0fbffff, 4043046912 bytes (987072 pages) avail memory = 8181329920 (7802 MB) APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 APIC ID: physical 2, logical 0:2 APIC ID: physical 3, logical 0:3 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 APIC: CPU 2 has ACPI ID 3 APIC: CPU 3 has ACPI ID 4 MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: Found IO APIC ID 5, Interrupt 24 at 0xfe6ff000 ioapic1: intpin 0 -> PCI IRQ 24 (level, low) ioapic1: intpin 1 -> PCI IRQ 25 (level, low) ioapic1: intpin 2 -> PCI IRQ 26 (level, low) ioapic1: intpin 3 -> PCI IRQ 27 (level, low) MADT: Found IO APIC ID 6, Interrupt 28 at 0xfe6fe000 ioapic2: intpin 0 -> PCI IRQ 28 (level, low) ioapic2: intpin 1 -> PCI IRQ 29 (level, low) ioapic2: intpin 2 -> PCI IRQ 30 (level, low) ioapic2: intpin 3 -> PCI IRQ 31 (level, low) MADT: Found IO APIC ID 7, Interrupt 32 at 0xfeaff000 ioapic3: intpin 0 -> PCI IRQ 32 (level, low) ioapic3: intpin 1 -> PCI IRQ 33 (level, low) ioapic3: intpin 2 -> PCI IRQ 34 (level, low) ioapic3: intpin 3 -> PCI IRQ 35 (level, low) MADT: Found IO APIC ID 8, Interrupt 36 at 0xfeafe000 ioapic4: intpin 0 -> PCI IRQ 36 (level, low) ioapic4: intpin 1 -> PCI IRQ 37 (level, low) ioapic4: intpin 2 -> PCI IRQ 38 (level, low) ioapic4: intpin 3 -> PCI IRQ 39 (level, low) MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-27 on motherboard ioapic2 irqs 28-31 on motherboard ioapic3 irqs 32-35 on motherboard ioapic4 irqs 36-39 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010000 wlan: <802.11 Link Layer> null: random: nfslock: pseudo-device mem: io: acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000c29c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 1 [class=060400] [hdr=81] is there (id=74501022) AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 1 AcpiOsDerivePciId: bus 0 dev 7 func 3 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 1 func 0 AcpiOsDerivePciId: bus 0 dev 2 func 0 AcpiOsDerivePciId: bus 4 dev 1 func 0 AcpiOsDerivePciId: bus 4 dev 2 func 0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0x5010 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x1022, dev=0x7450, revid=0x13 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7451, revid=0x01 bus=0, slot=1, func=1 class=08-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 64, base fe6ff000, size 12, enabled found-> vendor=0x1022, dev=0x7450, revid=0x13 bus=0, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7451, revid=0x01 bus=0, slot=2, func=1 class=08-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 64, base fe6fe000, size 12, enabled found-> vendor=0x1022, dev=0x7460, revid=0x07 bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7468, revid=0x05 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7469, revid=0x03 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x1022, dev=0x746a, revid=0x02 bus=0, slot=7, func=2 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[10]: type 4, range 32, base 0000cc00, size 5, enabled pcib0: matched entry for 0.7.INTD pcib0: slot 7 INTD hardwired to IRQ 19 found-> vendor=0x1022, dev=0x746b, revid=0x05 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=25, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=25, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=25, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=25, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x9000-0x9fff pcib1: memory decode 0xfbf00000-0xfbffffff pcib1: prefetched decode 0xfe700000-0xfe7fffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x8086, dev=0x1010, revid=0x03 bus=1, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base fbfe0000, size 17, enabled pcib1: (null) requested memory range 0xfbfe0000-0xfbffffff: good map[20]: type 4, range 32, base 00009c00, size 6, enabled pcib1: (null) requested I/O range 0x9c00-0x9c3f: in range pcib1: matched entry for 1.1.INTA pcib1: slot 1 INTA hardwired to IRQ 26 found-> vendor=0x8086, dev=0x1010, revid=0x03 bus=1, slot=1, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base fbfc0000, size 17, enabled pcib1: (null) requested memory range 0xfbfc0000-0xfbfdffff: good map[20]: type 4, range 32, base 00009800, size 6, enabled pcib1: (null) requested I/O range 0x9800-0x983f: in range pcib1: matched entry for 1.1.INTB pcib1: slot 1 INTB hardwired to IRQ 27 found-> vendor=0x8086, dev=0x1010, revid=0x03 bus=1, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base fbfa0000, size 17, enabled pcib1: (null) requested memory range 0xfbfa0000-0xfbfbffff: good map[20]: type 4, range 32, base 00009400, size 6, enabled pcib1: (null) requested I/O range 0x9400-0x943f: in range pcib1: matched entry for 1.2.INTA pcib1: slot 2 INTA hardwired to IRQ 24 found-> vendor=0x8086, dev=0x1010, revid=0x03 bus=1, slot=2, func=1 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base fbf80000, size 17, enabled pcib1: (null) requested memory range 0xfbf80000-0xfbf9ffff: good map[20]: type 4, range 32, base 00009000, size 6, enabled pcib1: (null) requested I/O range 0x9000-0x903f: in range pcib1: matched entry for 1.2.INTB pcib1: slot 2 INTB hardwired to IRQ 25 em0: port 0x9c00-0x9c3f mem 0xfbfe0000-0xfbffffff irq 26 at device 1.0 on pci1 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfe0000 em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x9c00 em0: bpf attached em0: Ethernet address: 00:14:4f:01:2d:74 ioapic1: routing intpin 2 (PCI IRQ 26) to vector 49 em0: [FAST] em0: Speed:N/A Duplex:N/A em1: port 0x9800-0x983f mem 0xfbfc0000-0xfbfdffff irq 27 at device 1.1 on pci1 em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfc0000 em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x9800 em1: bpf attached em1: Ethernet address: 00:14:4f:01:2d:75 ioapic1: routing intpin 3 (PCI IRQ 27) to vector 50 em1: [FAST] em1: Speed:N/A Duplex:N/A em2: port 0x9400-0x943f mem 0xfbfa0000-0xfbfbffff irq 24 at device 2.0 on pci1 em2: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfa0000 em2: Reserved 0x40 bytes for rid 0x20 type 4 at 0x9400 em2: bpf attached em2: Ethernet address: 00:14:4f:01:2d:7a ioapic1: routing intpin 0 (PCI IRQ 24) to vector 51 em2: [FAST] em2: Speed:N/A Duplex:N/A em3: port 0x9000-0x903f mem 0xfbf80000-0xfbf9ffff irq 25 at device 2.1 on pci1 em3: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbf80000 em3: Reserved 0x40 bytes for rid 0x20 type 4 at 0x9000 em3: bpf attached em3: Ethernet address: 00:14:4f:01:2d:7b ioapic1: routing intpin 1 (PCI IRQ 25) to vector 52 em3: [FAST] em3: Speed:N/A Duplex:N/A pci0: at device 1.1 (no driver attached) pcib2: at device 2.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xa000-0xafff pcib2: memory decode 0xfc000000-0xfc4fffff pcib2: prefetched decode 0xfe800000-0xfe8fffff pci2: on pcib2 pci2: physical bus=2 found-> vendor=0x1000, dev=0x0050, revid=0x02 bus=2, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords) lattimer=0x48 (2160 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 4, range 32, base 0000a800, size 8, enabled pcib2: (null) requested I/O range 0xa800-0xa8ff: in range map[14]: type 1, range 64, base fc0fc000, size 14, enabled pcib2: (null) requested memory range 0xfc0fc000-0xfc0fffff: good map[1c]: type 1, range 64, base fc0e0000, size 16, enabled pcib2: (null) requested memory range 0xfc0e0000-0xfc0effff: good pcib2: matched entry for 2.3.INTA pcib2: slot 3 INTA hardwired to IRQ 28 mpt0: port 0xa800-0xa8ff mem 0xfc0fc000-0xfc0fffff,0xfc0e0000-0xfc0effff irq 28 at device 3.0 on pci2 mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa800 mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xfc0fc000 ioapic2: routing intpin 0 (PCI IRQ 28) to vector 53 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.5.9.0 mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required). mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required). mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required). mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required). mpt0: Capabilities: ( RAID-0 RAID-1 ) mpt0: 0 Active Volumes (2 Max) mpt0: 0 Hidden Drive Members (10 Max) pci0: at device 2.1 (no driver attached) pcib3: at device 6.0 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xb000-0xbfff pcib3: memory decode 0xfc500000-0xfe5fffff pcib3: prefetched decode 0xfff00000-0xfffff pci3: on pcib3 pci3: physical bus=3 found-> vendor=0x1022, dev=0x7464, revid=0x0b bus=3, slot=0, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=11 map[10]: type 1, range 32, base fe1fe000, size 12, enabled pcib3: (null) requested memory range 0xfe1fe000-0xfe1fefff: good pcib3: matched entry for 3.0.INTD pcib3: slot 0 INTD hardwired to IRQ 19 found-> vendor=0x1022, dev=0x7464, revid=0x0b bus=3, slot=0, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=11 map[10]: type 1, range 32, base fe1fd000, size 12, enabled pcib3: (null) requested memory range 0xfe1fd000-0xfe1fdfff: good pcib3: matched entry for 3.0.INTD pcib3: slot 0 INTD hardwired to IRQ 19 found-> vendor=0x1002, dev=0x4752, revid=0x27 bus=3, slot=3, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fd000000, size 24, enabled pcib3: (null) requested memory range 0xfd000000-0xfdffffff: good map[14]: type 4, range 32, base 0000b800, size 8, enabled pcib3: (null) requested I/O range 0xb800-0xb8ff: in range map[18]: type 1, range 32, base fe1ff000, size 12, enabled pcib3: (null) requested memory range 0xfe1ff000-0xfe1fffff: good pcib3: matched entry for 3.3.INTA pcib3: slot 3 INTA hardwired to IRQ 16 ohci0: mem 0xfe1fe000-0xfe1fefff irq 19 at device 0.0 on pci3 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe1fe000 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: mem 0xfe1fd000-0xfe1fdfff irq 19 at device 0.1 on pci3 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe1fd000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered vgapci0: port 0xb800-0xb8ff mem 0xfd000000-0xfdffffff,0xfe1ff000-0xfe1fffff irq 16 at device 3.0 on pci3 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x01 err=0x01 lsb=0x01 msb=0x01 ata0: reset tp2 stat0=00 stat1=01 devices=0x4 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56 ata1: [MPSAFE] pci0: at device 7.2 (no driver attached) pci0: at device 7.3 (no driver attached) pcib4: on acpi0 pcib4: could not get PCI interrupt routing table for \\_SB_.PCIB - AE_NOT_FOUND pci4: on pcib4 pci4: physical bus=4 found-> vendor=0x1022, dev=0x7450, revid=0x13 bus=4, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0116, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7451, revid=0x01 bus=4, slot=1, func=1 class=08-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 64, base feaff000, size 12, enabled found-> vendor=0x1022, dev=0x7450, revid=0x13 bus=4, slot=2, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0116, statreg=0x0230, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x7451, revid=0x01 bus=4, slot=2, func=1 class=08-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 64, base feafe000, size 12, enabled pcib5: at device 1.0 on pci4 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0x0-0x0 pcib5: memory decode 0xfff00000-0xfffff pcib5: prefetched decode 0xfff00000-0xfffff pci5: on pcib5 pci5: physical bus=5 pci4: at device 1.1 (no driver attached) pcib6: at device 2.0 on pci4 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0x0-0x0 pcib6: memory decode 0xfff00000-0xfffff pcib6: prefetched decode 0xfff00000-0xfffff pci6: on pcib6 pci6: physical bus=6 pci4: at device 2.1 (no driver attached) acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 psm0: unable to allocate IRQ sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 acpi_hpet0: iomem 0xfec01000-0xfec013ff irq 0,8 on acpi0 acpi_hpet0: Vendor: 0x1022 acpi_hpet0: Leg_Route_Cap: 1 acpi_hpet0: Count_Size_Cap: 0 acpi_hpet0: Num_Tim_Cap: 8 acpi_hpet0: Rev_id: 0x3 acpi_hpet0: Period: 69841279 fs (14318180 Hz) acpi_hpet0: HPET attach Timecounter "HPET" frequency 14318180 Hz quality -200 ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xd27ff,0xd2800-0xd37ff pnpid ORM0000 on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: failed to probe at irq 7 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices ukbd0: on uhub0 ukbd0: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, addr 2, iclass 3/1 kbd0 at ukbd0 kbd0: ukbd0, generic (0), config:0x0, flags:0x1d0000 ums0: on uhub0 ums0: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, addr 2, iclass 3/1 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 umass0: on uhub1 umass0: American Megatrends Inc. Virtual Cdrom Device, rev 1.10/1.00, addr 2 umass0:2:0:-1: Attached to scbus2 umass1: on uhub1 umass1: American Megatrends Inc. Virtual Floppy Device, rev 1.10/1.00, addr 3 umass1:3:1:-1: Attached to scbus3 uhub2: on uhub1 uhub2: vendor 0x03eb Standard USB Hub, class 9/0, rev 1.10/3.00, addr 4 uhub2: 4 ports with 4 removable, self powered Device configuration finished. Reducing kern.maxvnodes 249660 -> 100000 procfs registered linprocfs registered lapic: Divisor 2, Frequency 99716690 hz Timecounter "TSC" frequency 2193767182 Hz quality -100 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805faf30, 0) error 6 Linux ELF exec handler installed lo0: bpf attached em0: Link is up 1000 Mbps Full Duplex ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on 8111 chip acd0: setting UDMA33 on 8111 chip acd0: DVDROM drive at ata0 as master acd0: read 4134KB/s (4134KB/s), 256KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ukbd1: on uhub2 ukbd1: vendor 0x0566 product 0x3002, rev 1.10/1.00, addr 5, iclass 3/1 kbd: new array size 4 kbd1 at ukbd1 kbd1: ukbd1, generic (0), config:0x0, flags:0x1d0000 uhid0: on uhub2 uhid0: vendor 0x0566 product 0x3002, rev 1.10/1.00, addr 5, iclass 3/1 (probe63:mpt0:1:0:0): error 22 (probe63:mpt0:1:0:0): Unretryable Error (probe64:mpt0:1:1:0): error 22 (probe64:mpt0:1:1:0): Unretryable Error (probe65:mpt0:1:2:0): error 22 (probe65:mpt0:1:2:0): Unretryable Error (probe66:mpt0:1:3:0): error 22 (probe66:mpt0:1:3:0): Unretryable Error (probe67:mpt0:1:4:0): error 22 (probe67:mpt0:1:4:0): Unretryable Error (probe68:mpt0:1:5:0): error 22 (probe68:mpt0:1:5:0): Unretryable Error (probe69:mpt0:1:6:0): error 22 (probe69:mpt0:1:6:0): Unretryable Error (probe70:mpt0:1:7:0): error 22 (probe70:mpt0:1:7:0): Unretryable Error (probe71:mpt0:1:8:0): error 22 (probe71:mpt0:1:8:0): Unretryable Error (probe72:mpt0:1:9:0): error 22 (probe72:mpt0:1:9:0): Unretryable Error (probe73:mpt0:1:10:0): error 22 (probe73:mpt0:1:10:0): Unretryable Error pass0 at mpt0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-4 device pass0: Serial Number 000545S00RM2 pass0: 300.000MB/s transfers, Tagged Queueing Enabled pass1 at mpt0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-4 device pass1: Serial Number 000545S00RFT pass1: 300.000MB/s transfers, Tagged Queueing Enabled pass2 at mpt0 bus 0 target 2 lun 0 pass2: Fixed Direct Access SCSI-4 device pass2: Serial Number 000533S009D9 pass2: 300.000MB/s transfers, Tagged Queueing Enabled pass3 at mpt0 bus 0 target 3 lun 0 pass3: Fixed Direct Access SCSI-4 device pass3: Serial Number 000533S008PL pass3: 300.000MB/s transfers, Tagged Queueing Enabled pass4 at umass-sim0 bus 0 target 0 lun 0 pass4: Removable CD-ROM SCSI-0 device pass4: Serial Number \M-z pass4: 1.000MB/s transfers pass5 at umass-sim1 bus 1 target 0 lun 0 pass5: Removable Direct Access SCSI-0 device pass5: Serial Number \M-z pass5: 1.000MB/s transfers da0 at mpt0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: Serial Number 000545S00RM2 da0: 300.000MB/s transfers, Tagged Queueing Enabled da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) da1 at mpt0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-4 device da1: Serial Number 000545S00RFT da1: 300.000MB/s transfers, Tagged Queueing Enabled da1: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) da2 at mpt0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-4 device da2: Serial Number 000533S009D9 da2: 300.000MB/s transfers, Tagged Queueing Enabled da2: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) da3 at mpt0 bus 0 target 3 lun 0 da3: Fixed Direct Access SCSI-4 device da3: Serial Number 000533S008PL da3: 300.000MB/s transfers, Tagged Queueing Enabled da3: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C) GEOM: new disk cd0 GEOM: new disk da0 GEOM: new disk da1 GEOM: new disk da2 GEOM: new disk da3 GEOM: new disk da4 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #3 Launched! cpu3 AP: ID: 0x03000000 VER: 0x00040010 LDR: 0x08000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 SMP: AP CPU #2 Launched! cpu2 AP: ID: 0x02000000 VER: 0x00040010 LDR: 0x04000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic1: routing intpin 0 (PCI IRQ 24) to cluster 0 ioapic1: routing intpin 1 (PCI IRQ 25) to cluster 0 ioapic1: routing intpin 2 (PCI IRQ 26) to cluster 0 ioapic1: routing intpin 3 (PCI IRQ 27) to cluster 0 ioapic2: routing intpin 0 (PCI IRQ 28) to cluster 0 (cd0:umass-sim0:0:0:0): Retrying Command (da4:umass-sim1:1:0:0): Retrying Command (cd0:umass-sim0:0:0:0): error 6 (cd0:umass-sim0:0:0:0): Unretryable Error cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: Serial Number \M-z cd0: 1.000MB/s transfers cd0: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready change, medium may have changed (da4:umass-sim1:1:0:0): Retrying Command (da4:umass-sim1:1:0:0): Retrying Command (cd0:umass-sim0:0:0:0): Retrying Command (da4:umass-sim1:1:0:0): Retrying Command (cd0:umass-sim0:0:0:0): error 6 (cd0:umass-sim0:0:0:0): Unretryable Error (da4:umass-sim1:1:0:0): error 6 (da4:umass-sim1:1:0:0): Unretryable Error da4 at umass-sim1 bus 1 target 0 lun 0 da4: Removable Direct Access SCSI-0 device da4: Serial Number \M-z da4: 1.000MB/s transfers da4: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready change, (cd0:umass-sim0:0:0:0): Retrying Command (cd0:umass-sim0:0:0:0): error 6 (cd0:umass-sim0:0:0:0): Unretryable Error (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da4:umass-sim1:1:0:0): SCSI Status: Check Condition (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed Retrying Command (per Sense Data) (da4:umass-sim1:1:0:0): Retrying Command (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da4:umass-sim1:1:0:0): SCSI Status: Check Condition (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed Retrying Command (per Sense Data) (da4:umass-sim1:1:0:0): Retrying Command (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da4:umass-sim1:1:0:0): SCSI Status: Check Condition (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed Retrying Command (per Sense Data) (da4:umass-sim1:1:0:0): Retrying Command (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da4:umass-sim1:1:0:0): SCSI Status: Check Condition (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): UNIT ATTENTION asc:28,0 (da4:umass-sim1:1:0:0): Not ready to ready change, medium may have changed Retrying Command (per Sense Data) (da4:umass-sim1:1:0:0): Retrying Command (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da4:umass-sim1:1:0:0): SCSI Status: Check Condition (da4:umass-sim1:1:0:0): NOT READY asc:3a,0 (da4:umass-sim1:1:0:0): Medium not present (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): NOT READY asc:3a,0 (da4:umass-sim1:1:0:0): Medium not present Unretryable error (da4:umass-sim1:1:0:0): error 6 (da4:umass-sim1:1:0:0): Unretryable Error Opened disk da4 -> 6 (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): CAM Status: SCSI Status Error (da4:umass-sim1:1:0:0): SCSI Status: Check Condition (da4:umass-sim1:1:0:0): NOT READY asc:3a,0 (da4:umass-sim1:1:0:0): Medium not present (da4:umass-sim1:1:0:0): (da4:umass-sim1:1:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da4:umass-sim1:1:0:0): NOT READY asc:3a,0 (da4:umass-sim1:1:0:0): Medium not present Unretryable error (da4:umass-sim1:1:0:0): error 6 (da4:umass-sim1:1:0:0): Unretryable Error Opened disk da4 -> 6 Trying to mount root from ufs:/dev/da3s1a start_init: trying /sbin/init em0: Link is up 1000 Mbps Full Duplex em0: Link is up 1000 Mbps Full Duplex em0: Link is up 1000 Mbps Full Duplex --------------090604070002010604080807--