Date: Fri, 24 Feb 2006 12:25:46 +0000 From: Viktorija <viktorija@oic.lv> To: Joseph Olatt <joji@eskimo.com> Cc: freebsd-stable@freebsd.org Subject: Re: Freebsd 6.1 and Palm Tungsten C Message-ID: <20060224122546.aca3a917.viktorija@oic.lv> In-Reply-To: <20060219183322.A19745@eskimo.com> References: <20060219025646.b68bea86.viktorija@oic.lv> <20060219183322.A19745@eskimo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi!
Thanks for Your help!
I tried Your advice, but i'm in stock anyway.
Because all devices are created when i press Palm Sync. Except of course /dev/ucom0, which now is replaced by /dev/cua0 in 6.+ version fbsd.
But when i press sync and run command which you have mentioned before, nothing happens...
i see only
Listening to port: /dev/cuaU0
Please press teh HotSync button now....
and nothing... after a few minutes palm says: unable to connect with device and that's all...
i have googled, but didn't find any resolution, except same questions without any answers...
it's seems - somewhere it's working and somewhere not...
i don't know what else i can do...
Best Regards,
Victoria
Hello Victoria,
>
> I also have a Tungsten C that I am using with FreeBSD 6.1-PRERELEASE
> without any problems.
>
> I *do not* have the entries that you have in my usbd.conf. In fact, I
> have not touched usbd.conf. However, I have the following entries added to
> /etc/devd.conf:
>
> attach 10 {
> device-name "ucom0";
> action "chmod 0666 /dev/cuaU0";
> };
>
>
> To backup my palm, I do the following:
>
> 1. kldload uvisor
>
> 2. Press the sync button on my Tungsten C cradle.
>
> 3. Run the following command:
> pilot-xfer -p /dev/cuaU0 -b /home/someone/palm_bkup
>
> Try commenting out the entries in your usbd.conf file and add the
> entries that I have in my devd.conf file and see if it works for you.
>
> regards,
> joseph
>
>
>
> On Sun, Feb 19, 2006 at 02:56:46AM +0000, Viktorija wrote:
> > Hi!
> >
> > I have following problem. I have Palm Tungsten C and FreeBSD 6.1 on my laptop. I'm trying to synhronize my palm with freebsd, but without any success. What i did:
> > in kernel added devices:
> > ucom and uvisor.
> > in usbd.conf:
> > device "Palm Handheld"
> > devname "ucom[0-9]+"
> > vendor 0x0830
> > product 0x0060
> > release 0x0100
> > attach "ln -fs /dev/ucom0 /dev/pilot; chmod 666 /dev/ucom0"
> >
> > When i press sync button on palm, i see in messages:
> > Feb 19 02:50:29 blue kernel: ucom0: Palm, Inc. Palm Handheld, rev 1.00/1.00, addr 2
> >
> > And in /dev directory i get cuaU0 and ttyU0, but not ucom0.
> > Ok, i saw in one message, that now ttyU0 should be used instead of ucom0, but when i'm trying:
> > pilot-xfer -p /dev/ttyU0 -i palm/softs/Tube/Tube2.prc
> > nothing happens...
> >
> > What i'm doing wrong?
> > Why ucom0 doesn't exist?
> > Maybe someone got similar problems?
> >
> >
> > Thank You!
> > Victoria
> > _______________________________________________
> > freebsd-stable@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>
>
On Sun, 19 Feb 2006 18:33:22 -0800
Joseph Olatt <joji@eskimo.com> wrote:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060224122546.aca3a917.viktorija>